Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

+ Advanced search
111 articles
Proceedings Article

Peer-Review Statements

M. Udin Harun Al Rasyid, Mohammad Robihul Mufid
All of the articles in this proceedings volume have been presented at the 6th International Conference of Applied Science on Social Science 2023 (The 6th ICAST-ES 2023) during 20st – 22rd October 2023 in Swiss-bell Hotel International, Tarakan – North Kalimantan, Indonesia. These articles have been peer...
Proceedings Article

Modification MVC Architecture in PHP using Basedata Service Display Pattern

Mohammad Robihul Mufid, Yogi Pratama, Arna Fariza, Saniyatul Mawaddah
Model View Controller (MVC) is a design pattern of structuring the folder structure used to separate between files that have the function of interacting with the database (Model), sending data obtained by the database with an interface page (Controller), and displaying data with an interface page (Views)....
Proceedings Article

Compressor Speed Variation toward Solar Display Cabinet Cooling System Performance

I. D. M. Cipta Santosa, I. G. N. Suta Waisnawa, I. G. A. B. Wirajati, P. W. Sunu
The conversion of an alternating current (AC) motor-compressor of refrigeration system toward a direct current (DC) motor need to be good analysis to get better performance of the system. The compressor type changing can affect lower compressor work due to a changing refrigerant used and also power supply...
Proceedings Article

Energy Saving Application with Operational Automation for Tourism Accommodation Utilities

I Gusti Agung Bagus Wirajati, I Dewa Made Cipta Santosa, I Made Sudana, I Made Ida Ayu Gede Bintang Madrini
Energy in buildings in tropical regions such as Indonesia is dominated by air conditioning systems. With the high use of electrical energy from tourism accommodation, it will be difficult to develop because operational costs are high. Thus, the purpose of this research is to obtain energy savings from...
Proceedings Article

Modellings Smart Home Security Based Internet of Things (IoT)

I Ketut Parti, I Nyoman Mudiana, I Ketut Darminta, Ni Wayan Rasmini
Smart home security built on the Internet of Things (IoT) is a concept in which home security systems are constructed using IoT technologies. Through the interconnection of linked devices like cameras, motion sensors, DHT sensors, MQ-7 gas sensors, and door locks with the internet, real-time visual monitoring...
Proceedings Article

Drying Spices by Utilizing the Dehumidification Process and the Heat Condensor in the Refrigeration System

I Nengah Ardita, I Gusti Agung Bagus Wirajati, I Dewa Made Susila, I Ketut Suherman
The results of spices in Indonesia are very abundant. Its use is also very much like for cooking, cosmetics, medicine, and so on. To maintain the quality and quality of spices are usually stored in dry form. For this reason, equipment is needed in the drying process. This study aims to investigate the...
Proceedings Article

Programmable Camera Module as a Distance Viewing of Live Power Line 20 KV-Hand Robotic

I Wayan Jondra, I Nengah Sunaya, I Gusti Putu Arka, Ida Bagus Putu Yogi Pramana Putra, I Wayan Sudiarsa, Made Purbhawa
Electrical energy is a very important requirement for life, almost all life activities require electrical energy. The live line voltage installation of the insulator cover on the strain clamp 20 kV system is done by a hand robotic is a forward effort to prevent disturbance on the overhead medium voltage...
Proceedings Article

On-Site Testing A Prototype Solar Drying Cabinet Utilising Calcium Chloride as Dehumidifier

I. D. G. Agustriputra, I Wayan Suirya, I Nyoman Gede Baliarta, Ketut Bangse, Wayan Temaja, I Made Suarta
Solar drying is a sustainable and eco-friendly method that generates no greenhouse gas emissions or air pollutants. It contributes to reducing the carbon footprint of the drying process. By using solar power as the main energy source, the prototype solar dryer can help reduce electricity costs and reduce...
Proceedings Article

The Use of Showcase Chiller with Solar Panels as the Final Stage of the Cold Chain for Fish Sellers in Traditional Market

I Dewa Made Susila, I Wayan Adi Subagia, I Nengah Ardita
Fish as a commodity that easily and quickly decomposes requires fast, clean, careful, and cold handling. Thus the quality of the fish can be maintained from the time the fish is removed from the sea until the fish is marketed to consumers. Handling fish to maintain its quality to keep it fresh and hygienic...
Proceedings Article

Development of Hydraulic-Based Equipment for Candlenut Oil Extraction: Design and Implementation

I. P. G. Sopan Rahtika, I. M. Suarta, I. K. Rusmariadi, K. B. W. Yasa
Indonesia possesses a remarkably diverse biodiversity that holds significant potential for enhancing the national economy. Among the traditional products commonly employed for medicinal purposes is candlenut oil. However, the current extraction process for candlenut oil relies on manual squeezing, following...
Proceedings Article

Monitoring of Battery Energy for Hybrid PLTS and Picohydro Systems on Water Pumps

I Nyoman Sugiarta, I G. W. Antara Kurniawan, I Nengah Suparta
The use and utilization of renewable energy must continue to be developed both in terms of science, human resource skills and its application in society. The use of solar energy as an alternative energy to generate electricity has been widely applied. One of them is to turn on a 250 W, 12 V submersible...
Proceedings Article

Development of IoT Based Monitoring of Anaerobic Biogas Production

Rif’ah Amalia, Prima Dewi Permatasari, Aulia Lailatul Fitri, Hendrik Elvian Gayuh Prasetya, Fifi Hesty Sholihah
Biogas is a mixture of gases produced from the fermentation process of organic matter derived from animal waste. This research uses a measurement system to monitor conditions in the biogas reactor. Three variations were carried out, namely 1:1:0 (variation 1); 1:1:0.1 (variation 2); 1:0.5:0.2 (variation...
Proceedings Article

Trouble Shooting Steering Clutch on Builder Unit D155A-2 Komatsu

Al Amin, Hamka Munir, Supriadin Supriadin
The Komatsu D155A-2 bulldozer is a sequence tractor designed for vaious earthmoving obligations, presenting components just like the blade, raise cylinder, cabin, gasoline tank, ripper, and more. it's far powered by an SA6D10E-2 engine and uses a crawler-type steering machine with a grasp for manipulate....
Proceedings Article

Bertopic and NER Stop Words for Topic Modeling on Agricultural Instructional Sentences

Trisna Gelar, Aprianti Nanda Sari
A drawback of topic modeling is the lack of consistent sentence frequency within each topic. The outcome of this event manifests as varying levels of topic coherence and topic diversity. One potential approach to addressing this issue involves the modification of stop words, which refers to the removal...
Proceedings Article

Making Special Tools (SST) Valve Spring Removal on the Komatsu Pc130-7

Ismail Ramli, Hamka Munir
In its development, heavy equipment engines produced today have four valves in each cylinder (two intake valves and two exhaust valves). With the increasing number of valves in each cylinder, the process of replacing and compacting the valves will require time and labor. Therefore, we need a tool to...
Proceedings Article

Measurement Analysis for Multi Shared Key (MSK) Based Star Topology in Various Static Environments

Mike Yuliana, Rifqi Nurfianto, Amang Sudarsono
Problems in the implementation of channel probing related to the correlation generated against the environment used to provide an interesting idea for conducting further analysis of channel probing in various environments in static conditions. This paper analyzed channel probing systems on ad hoc multi-user...
Proceedings Article

Design and Performance Analysis of Microstrip Antenna using Flexible Material for 915 MHz LoRa Frequency

Nurista Wahyu Kirana, Farrah Vauzia
IoT (Internet of Things) is a system that allows the interconnectivity of various devices remotely via the internet. Modern IoT devices require a variety of options when it comes to connectivity. The IoT technology currently widely used is LoRaWAN (Long Range Wide Area Network) due to its low power consumption...
Proceedings Article

Blockchain-Based Long-Term Multisignature

Aprianti Nanda Sari, Trisna Gelar
The digital signature is well recognized as a prominent use of asymmetric-key cryptography, effectively addressing the limitations associated with handwritten signatures through the preservation of data integrity. The digital signature is characterized by the involvement of two distinct parties. In practical...
Proceedings Article

Implementation of Response Surface Method to Minimize Product Defects on Wax Pattern Injection Process Parameters

Farizi Rachman, Dhika Aditya Purnomo, Kholish Adilah Damayanti
Wax injection machining is the only technique to produce many ideal products in large volumes, which is the most common method in the investment casting process. One of the products that has the highest number of orders in metal casting companies that use investment casting techniques is the VS 2/4/6...
Proceedings Article

Fault analysis of fuel system on Komatsu PC200–8 excavator (case studies at PT Kaltim Plantation)

Denny Hendra Cipta
Komatsu PC200–8 is a type of excavator that is widely used in the mining and plantation industries in East Kalimantan. Operational disruption of excavators can cause losses for the company considering its vital role in the company's production process. One of the Komatsu PC200–8 excavators owned...
Proceedings Article

Analysis of low fuel pressure on the common rail system on the engine of wheel loader WA500–3 (case study at PT Sapta Indra Sejati site Sambarata)

Denny Hendra Cipta, Ismail Ramli
Common rail systems in diesel engines offer several advantages over traditional fuel injection systems, such as older mechanical injection systems. These advantages include precise fuel injection control, higher fuel efficiency, reduced noise and vibration, lower emissions and many other advantages....
Proceedings Article

Analysis of Integrated Clean Water Supply System in Karangasem Regency

I Gusti Lanang Made Parwita, Made Mudhina, I Ketut Sutama
The western part of Karangasem Regency is an area that has sufficient water resources to be used as irrigation water and clean water, while the eastern part is experiencing problems due to a lack of existing water sources. The development of clean water services in this regency is experiencing problems...
Proceedings Article

Precast Concrete Slab of Lightweight Brick

Pratikto Pratikto, Anni Susilowati
The main need for the community is a house with an area of land that can meet the needs of the family. Residential floor can be extended vertically upwards which is a concrete floor slab. This can be fulfilled with a series of lightweight bricks reinforced by plain reinforcement which is a one-way slab...
Proceedings Article

Road Shoulder Classification Using the CNN Algorithm with the MobileNetV2 Model

Rahardhita Sudibyo, Haniah Mahmudah
The condition of the road that is traversed by high and repeated traffic volumes will affect the condition of road construction, leading to a decline in the quality of the road, which impacts the safety, comfort, and smoothness of traffic. This paper will discuss Deep learning to evaluate damage detection...
Proceedings Article

Monitoring System for Autonomous Underwater Vehicles with IDEA Algorithm

Nanang Syahroni, Risky Ageng Kharisma, Widya Andi Palupi, Djoko Santoso Dan, Hari Wahjuningrat Suparno
Autonomous Underwater Vehicles (AUV) is a type of underwater vehicle that has been widely developed in the world and in Indonesia. This AUV is well known for commercial use and even for military purposes. AUV is equipped with various sensors and other equipment to support activities in making observations...
Proceedings Article

Development of Digital Squeeze Frame as Creative Media Advertisement for Metaverse

Novita Astin, M. Hasbi As Siddiq, Rachmat Santoso
Marketing in selling products through certain channels and disseminating services and ideas is called Advertising. There are several problems within advertising on television one of which is zapping occurs when the audience switches to other channels while the ad is running. According to one study, approx...
Proceedings Article

The Process of Making the Angguk Pump Diorama

Rizki Febrian, Sapto Wiratno Satoto, Nidia Yuniarasih
Sockers rod pumps in the oil and gas industry are tools used to take petroleum from wells to the ground surfaces. The pump method is used for wells that do not have sufficient pressure to raise oil to the surface. This paper discusses how to make a pump nodding diorama using aluminum as the main material,...
Proceedings Article

Classification of Pupil Turbidity Based on Convolutional Neural Network (CNN) as an Early Detection of Cataract Step Using a Smartphone

Dewi Mutiara Sari, Riyanto Sigit, Dias Agata, Muhammad Firdaus Maulana
Cataracts are the number one cause of blindness in the world as well as in Indonesia according to the World Health Organization (WHO). The high cases of cataracts in Indonesia are not matched by adequate health facilities. The cataract surgery rate in Indonesia is still below the ideal cataract surgery...
Proceedings Article

Conceptual Design of Coconut Haustorium (Cocos nucifera) Simplicia Dryer Integrated with Solar Power Plant

Stieven Netanel Rumokoy, Adriyan Warokka, Arnold Robert Rondonuwu, Karlah Lifie Riani Mansauda, I Gede Para Atmaja, Mauren Langie
Coconut commodity has significantly contributed to Indonesia as a foreign exchange source through exports. Typically, farmers process coconuts into copra. On the other hand, the potential of other coconut derivative products still holds considerable opportunities for further exploration. Innovation in...
Proceedings Article

A Review Geospatial Artificial Intelligence (Geo-AI): Implementation of Machine Learning on Urban Planning

Cholid Fauzi
Geospatial Artificial Intelligence (Geo-AI) is an interesting topic in its development and application in our lives. One of them is spatial planning which contributes to the economic and social development of a region or country. Spatial data is the main thing in this research, by maximizing the effectiveness...
Proceedings Article

Design of Doyo Leaf Softener Machine

Dwi Cahyadi, Ratna Wulaningrum, Imam Rojiki, Suparno Suparno, Ferry Bayu Setiawan
Handicraft products are made from materials and tools that are around the craftsmen. One of the handicraft products in Indonesia is Doyo weaving. The current increase in sales of Doyo weaving makes it difficult for craftsmen to meet market needs. This is because the process of making Doyo weaving is...
Proceedings Article

Detection System of Cattle Foot and Mouth Disease (FMD) using Deep Learning

Moch. Zen Samsono Hadi, Rizky Bintang Fahreza, Dinda Dwimagfiroh, Aries Pratiarso, Haniah Mahmudah
Foot and Mouth Disease (FMD) is an extremely transmissible viral illness that specifically targets cloven-hoofed animals, such as cattle. It is caused by the Foot and Mouth Disease Virus (FMDV). Traditionally, FMD detection involves manual observation by trained veterinarians, which is time- consuming...
Proceedings Article

Calculation of the Needs and Availability of Clean Water Perumda Air Minum Tirta Taka Nunukan Regency South Nunukan Village

Tri Haryo Nugroho, Muhammad Syarif, Nagin Meliny
A reservoir is an artificial or natural body of water that stores and supplies clean water. It is an essential and perpetual requirement for human beings, necessitating continuous provision and fulfilment. The water consumption in South Nunukan Village has been increasing steadily in tandem with its...
Proceedings Article

Application of the Automatic Identification System Transponder for Monitoring the Safety of Fishing Vessels

Supria, Romadhoni, M. Afridon, Marzuarman Marzuarman, Depandi Enda, M. Nur Faizi
Bengkalis Island is located between the island of Sumatra and Malaysia and is surrounded by the Melaka Strait and the bengkalis Strait. The Melaka Strait and the bengkalis Strait are the traffic of ships such as import-export ships, company ships, passenger ships, freight ships, fishing boats, passenger...
Proceedings Article

Design of a Fire Extinguishing System with Gas Clean Agent Halocarbon HCFC Blend A Fire Extinguishing Media in the Ship’s Engine Room

Ekky Nur Budiyanto, Eko Julianto, Priyo Agus Setiawan, R. Dimas Endro Witjonarko, Rikat Eka Prastyawan, Ni’matut Tamimah, Nada Fitria Hisanah
The engine room is one of the most critical compartment that have significant level of risk. There are many equipments, devices, and environmental aspects considered having potential caused of fire. Those of the potential components could rise probability of fire. Therefore safety operation on engine...
Proceedings Article

Evaluation of Compatibility of Simple Residential Structures with Earthquake-Resistant Residential Technical Guidelines

Muhammad Syarif, Andrial Imran, Maria Menung Migo, Sri Astika
In Indonesia, earthquakes generally cause human casualties, property victims, and shelter. The earthquake did not cause direct human casualties but was caused by the ruins of buildings during the earthquake, hitting people around them. What can be done is disaster mitigation, one of which is by promoting...
Proceedings Article

Comparison of Eucheuma Cottonii Seaweed Drying Methods on the Quality of Dried Seaweed in the Tanjung Area, West Nunukan District, Nunukan Regency

Jemri Jemri, Harizatul Jannah
Nunukan Regency is one of the regencies in North Kalimantan Province which is one of the regencies that produces seaweed which is processed into dried seaweed. To handle seaweed products, a drying method is needed that is suitable and easy for the community to use and it is necessary to know what methods...
Proceedings Article

Performance of Prefabricated Vertical Drain Using Triangular Pattern for Soft Soil on Sigli Banda Aceh Toll Road

Liliwarti Liliwarti, Dwina Archenita, Silvia Nengsih, Afrianto Khairil Rizal Amri, Muhammad Ramadi
The Sigli - Banda Aceh Toll Road passes through an area where the subgrade consists of soft soil. Geotechnical issues usually arise that settlement over a relatively extended period, which can damage the structure constructed above it. One of the improvement methods for soft soil problems is a Prefabricated...
Proceedings Article

Groundwater Seepage Modeling in the Basement of Building X and Its Handling

Miftakhul Muadhomah, Dimas Arya Pratama, Garup Lambang Goro, Risman Risman, Aiun Hayatu Rabinah
The high groundwater table and the placement of the basement below the groundwater level give rise to several issues, one of which is groundwater seepage. The accumulation of groundwater seepage on the basement floor surface leads to discomfort for the building users, as observed in Building X, located...
Proceedings Article

Vision-Based Object Detection for Efficient Monitoring in Smart Hydroponic Systems

Septafiansyah Dwi Putra, Agus Ambarwari, Imam Asrowardi, Moh. Harris Imron S. Jaya
With the advancements in technology, smart hydroponic systems have gained popularity as an efficient and sustainable method of cultivation. These systems allow for precise monitoring and control of various parameters such as nutrient levels, pH, temperature, and humidity. To further improve the monitorin...
Proceedings Article

IoT based Credit Payment Management (MCP) Monitoring System for the Caterpillar 305.5E2 Excavator

Faisal Backrie, Prihadi Murdiyat, Verra Aullia
In heavy equipment sales, mainly by credit payment, leasing company or owner gives customer the trust to use heavy equipment or machines and pay off the credit by the project income they are working on. Agreement between the two parties is generally implemented as a contract involving day-to-day working...
Proceedings Article

Design and Analysis of Autoloader Equipment to Assist the Loading Process of Polypropylene Plastic Seeds in the Injection Molding Machine: Study Case

Abdul Syukur Alfauzi, Eko Saputra, Yusuf Dewantoro Herlambang, Friska Ayu Fitriani Sugiono, dan Ade Satria Widhiarta
This study focuses on the manual process of transferring plastic pellets into the plastic molding production machine, in which the operator brings the plastic pellets up to the top of the plastic molding production machine due to the high hopper on the plastic molding production machine. The goal of...
Proceedings Article

Meeting Point Recommendation System Using Collaborative Filtering Method

Himma Filangga Sutopo, Tita Karlita, Entin Martiana Kusumaningtyas
Recommendation systems aim to provide item recommendations to users. By offering recommendations, users can consider the suggested items. One method for building a recommendation system is Collaborative Filtering. Collaborative filtering works by utilizing user ratings to predict their ratings for specific...
Proceedings Article

Effectiveness of Cotton Spinning Machines for Yarn Craftsmen

Anom Adiaksa I Made, Suma Wibawa I Wayan, I Made Satrya Ardikosa
A cotton spinner is a tool used to spin cotton fibers into stronger threads and can be used for various purposes, such as making clothes and fabrics. A traditional cotton gin usually consists of several components, such as a spinning wheel, a spinning table, and a human hand or foot mover. However, nowadays...
Proceedings Article

IoT Based Battery Capacity Monitoring System on Solar Panels in Electric Vehicle

Jefri Lianda, Abdul Hadi, Adam Adam, Hikmatul Amri, Gusti Eviani
This paper studies the battery capacity monitoring system on solar panels in electric cars using the IoT-based NodeMCU ESP8266. All of these systems were built with the aim of making it easier for workers to manage incoming power consumption when charging the battery while preventing battery damage so...
Proceedings Article

Design of Microstrip Planar Array Antenna for Wireless Sensor Device Charging at Frequency 2300 MHz

Ari Wijayanti, Tiara Lisdayana Putri, Okkie Puspitorini, Nur Adi Siswandari
In this paper, several models of planar array microstrip antennas are used for energy harvesting. This antenna is used to receive electromagnetic waves emitted by RF (Radio Frequency) sources and turn them into an electric wave. The design of planar array microstrip antennas will use a mathematical approach....
Proceedings Article

Numeric Analysis of Blades Curvation of Savonius Wind Turbine

Delffika Canra, Muhammad Luthfi, Ruzita Sumiati, Yusup Rohmat
One promising source of renewable energy is wind energy. Wind energy is an abundant source of renewable energy to produce clean energy. A wind turbine is a device used to convert wind energy into kinetic energy. The average wind speed is 3m/s to 7m/s in Indonesia, classified as low wind speed. Savonius...
Proceedings Article

Strength Analysis of Navigation Board Structure on Fast Ferry Vessels Using Finite Element Method

Budianto Budianto
Fast Ferry Ship is a ship used to carry passengers who will cross between islands. This ship prioritises passenger comfort and safety. Planning the supporting parts of the ship must refer to and comply with applicable regulations and classification standards. One of the important parts that must be present...
Proceedings Article

Experimental And Theoretical Analysis Of The Airlift Pump-Nozzel Jet Bubble Generator Performance For Aquaculture Applications

I. G. N. B. Catrawedarma, Jangka Rulianto, Reni Nur Jannah, Fredy Surahmanto
A theoretical model using the power balance approach has been developed to predict the water discharge from the airlift pump-nozzle jet bubble generator system applied to aquaculture. The research was conducted on the ratio of the water level to the total riser pipe height of 0.83. The influence of the...
Proceedings Article

8 Steps Power Factor Correction Automation for 2200VA Single Phase Household

Adi Wasono, Eriko Arvin Karuniawan, Aggie Brenda Vernandez, Mohammad Khambali, Akhmad Jamaah, Triyono Triyono, Agus Adiwismono, Aji Hari Riyadi
An automated power factor correction system can optimize energy efficiency and reduce costs for a single-phase household load of 2200 VA. Voltage-current phase differences can be corrected using automated power factor correction devices, such as capacitors, greatly enhancing power factor proximity to...
Proceedings Article

Trajectory Tracking Control of Three Wheeled Omnidirectional Mobile Robot Using Proportional Controller

Pipit Anggraeni, Nur Jamiludin Ramadhan, Miftahul Huda
Polebot is the educational robot developed by Bandung Polytechnic of Manufacturing which has a type of omnidirectional mobile robot with three Omni wheels assembled at an angle of 120 degrees. Stability of movement is one of the important things in robots. This study aims to make Polebot move according...
Proceedings Article

Use Of Biodiesel B35 In Direct Injection Diesel Engine With Load Variation

Aris Palinggi, Lukas Lantang, Bernandus Bernandus
Crude Palm Oil (CPO) is one of the raw materials for making biodiesel and until 2022 B30 biodiesel has been used which is marketed by Pertamina but B30 biodiesel is not popular because it is not yet trusted by consumers. In 2023 the CPO content in biodiesel will be increased to 35% (B35), therefore it...
Proceedings Article

Performance Study Of 2 Pk Split AC Through Variation Of Capillary Tube For 0.070 Inch And 0.080 Inch Diameter With R22 And R290 Refrigerants

Jhon Arnoldos Wabang, Edwin P. D. Hattu, Nasaruddin, Aris Samule, Marselinus Doreng, Fransisko P. Niron, Amirudin Abdullah, Duran Hore, Jufra D. J. Abanat, Antonius Pangalinan
The capillary tube is one of the most important components in the air cooling system (AC), whose function is to reduce the pressure and temperature of the refrigerant in the AC system. The dimensions of the capillary tube influence the performance of an air cooling system, therefore this research was...
Proceedings Article

Performance Analysis Of Car Cooling System Based On Variation Of Expansion Valve

Jufra D. J. Abanat, Edwin P. D. Hattu, Nasaruddin Nasaruddin, Aris Samule, Marselinus Doreng, Duran Hore, Fransisko P. Niron, Amirudin Abdullah, Jhon Arnoldos Wabang
Refrigeration technique is a technique for regulating air temperature in accordance with desired needs, covering the needs of rooms in offices, in industry, shops and others such as processing needs for food preservation, including service/production, maintenance and quality control. In a cooling system...
Proceedings Article

Implementation of IoT Platform Analytics for Monitoring Coastal Water Conditions

M. Udin Harun Rasyid, Arif Basofi, Sritrusta Sukaridhoto, Yanu Adi Nugraha
In 2018, the level of damage to mangrove forests reached 5.9 million hectares or around 68.8%. As the damage increases, some action must be taken to maintain sea water quality by researching and monitoring water quality. The research can be done conventionally but will have several obstacles including...
Proceedings Article

Post Seaweed Cultivation Bottled Utilization for Fuel Alternative Production by Pyrolysis Method: A Review

Yosep Yuswanto Tri Ananda, Gabriela Elsandika
A seaweed cultivator has an average of 400–5,000 ropes, where 1 ha of water area can be installed around 800 ropes. It delivers to the increasing the number of plastic bottle waste. The plastic bottles are used as floats in seaweed cultivation. Plastic bottle waste is an environmental problem for the...
Proceedings Article

Temperature and Relative Humidity in Temukus, Besakih Village, Rendang District, Karangasem Regency, Bali Province

Anak Agung Ngurah Gde Sapteka, Anak Agung Ngurah Made Narottama, Kadek Amerta Yasa, Komang Agus Widyatmika
This research is focused on the maximum and minimum temperature and relative humidity (RH) data in Temukus, Besakih Village, Rendang District, Karangasem Regency, Bali Province. We use the Davis Vantage Pro 2 Wireless Weather Station to measure air temperature and relative humidity (RH) at the research...
Proceedings Article

Comparative Analysis of Buck-Boost Converter with Sepic Converter for Optimization of Wind Power Plant Output Voltage

Anggara Trisna Nugraha, Salsabila Ika Yuniza, Muhammad Fikri Fathurrohman, Fortunaviaza Habib Ainudin
Energy is the main necessity for carrying out activities in various sectors. The fulfillment of energy is still dependent on fossil energy, which causes various negative impacts. Indonesia’s location on the equator makes Indonesia an area of air movement. Some areas in Indonesia have considerable potential...
Proceedings Article

Internet of Thing for Smart Campus: Systematic Literature Review

Beri Noviansyah, Lena Lestary
This research shows that IoT and Smart Campus are issues that will remain hot to be discussed even in the next few years, such as sustainable universities, big data, and the internet of things. The sustainable university variable is also a variable that is still rarely found and is a contemporary thing...
Proceedings Article

Designing of Japanese Language Learning Media Using Virtual Reality Technology

Indika Ade Pramesti, Ganjar Ndaru Ikhtiagung, Linda Perdana Wanti, Lutfi Syafirullah
Learning Research conducted at SMK Negeri 1 Cilacap focused on the importance of mastering various aspects of learning Japanese, with special emphasis on speaking skills. This research, based on observations and interviews with Japanese teachers and students, identifies the need for innovative and interactive...
Proceedings Article

Expert System For Diagnosing Diseases In Rice Plants

Zaroh Khoerunisa, Linda Perdana Wanti, Oman Somantri, Agus Susanto, Ratih Hafsarah Maharani
Rice plants play a crucial role in satisfying human dietary requirements. However, they are vulnerable to diseases and various factors that can negatively impact crop yields and grain quality. Consequently, it is imperative to possess a comprehensive understanding of rice plant care and effective farming...
Proceedings Article

Assessing Obesity Risk in Student: A Fuzzy Logic Approach for Precision Health

Nurohmat, Nur Budi Nugraha
Obesity is a significant and increasing global health challenge, impacting individuals and society on multiple fronts. Its prevalence continues to increase and attacks individuals from various age groups, including students at the Polytechnic. The transition from adolescence to adulthood, a period marked...
Proceedings Article

Heat Energy Balance Test Of Mango Puree Dryer Machine Capacity 5 kg / Day Using A Hot Air Furnace System

K. Ahmad Maulana, Ade S. Margana, Sunanto Sunanto, P. Triaji Pangripto
Mango puree is a semi-finished product processed from mangoes. This mango puree is usually preserved using the freezing method or the method of adding preservatives. But actually this mango puree can also be preserved by the drying method. The advantage of the drying method over the freezing method is...
Proceedings Article

Manufacture of Solar Home System Portable for Lighting Tancap Chart with a Capacity of 200wp for Traditional Fishing Group Tuak Sabu Lasiana

Maria Dolorosa Badjowawo, David Obed Bekak
The technique of fish fishing by the traditional fishing group Tuak Sabu Lasiana still uses a lift net with lighting still using petromax lamps, where the fuel still uses kerosene at a high price. The use of electrical energy as a source of lighting on the lift net is crucial in fishing....
Proceedings Article

Vibration Study in the Passenger Cabin of the Polbeng II Ship

Jupri, B. Siswandi, Afriantoni Afriantoni
The Polbeng II ship has the following main dimensions: Lpp = 9.8 m, B = 1.8 m, H = 1 m, T = 0.6 m, and Vs = 21 knots. Based on the calculation, the ship’s resistance is 5.7 kN, and the engine power is 98 HP. In the ship’s transmission system, the gearbox ratio is 1:3, the shaft has a diameter of 13/4″,...
Proceedings Article

Analysis of Data Communication and Soil Moisture and pH Sensors in Soil Monitoring System using LoRa Technology: Performance Evaluation and Distance Measurement

Mina Naidah Gani, Hepi Ludiyati, Rifa Hanifatunnisa, Eril Mozef
Monitoring soil moisture and pH levels is crucial for tracking the health of plants. Therefore, it is necessary to develop a device for measuring soil moisture and pH with the aim of plant monitoring. This device utilizes Long Range technology and consists of two nodes that monitor two different soil...
Proceedings Article

Fuzzy Logic Based Nutrient Concentration Control System Using the Internet of Things

Nurmahaludin Nurmahaludin, Gunawan Rudi Cahyono
Hydroponic plant cultivation was developed as a solution to limited land, especially in urban areas. The most important thing in hydroponic cultivation is water and nutrients, where each type of plant requires a different concentration of nutrients. Plants that are given a nutrient solution that is too...
Proceedings Article

Methods of Using Cross Flow Model Fins on Water Wheels on The Rotating Power of The Shaft at Low Flow Discharges With Variations in The Number of Wheels As Electric Generator Drives Pico Hydro Power Plant Testing

Suliono Suliono, Delffika Canra, Muhamad Ghozali, Dori Yuvenda, Wanda Afnison
Pico Hydro Power Plant (PLTPH) is the smallest scale power plant among other power plants with power generated with a capacity of less than 5 kW. Pico Hydro is one of the renewable energy sources that is environmentally friendly and also considered safe. In this study aims to; Making energy-efficient...
Proceedings Article

Utilization of Small Unnamed Aerial Vehicle(SUAV) Technology in Mapping the Lake Tondano Ring Road at STA 0 + 00 to Sta 21 + 100

Sherley Runtunuwu, Estrellita V. Y. Waney, Tampanatu P. F. Sompie, Fauzihan A. I. Tompunu
Mapping using a Small Unnamed Aerial Vehicle (SUAV) is a process of making maps using aerial photos with high resolution images in a faster and more efficient manner so that it can save time when compared to using conventional methods. Ground Control Point (GCP) was created to increase the accuracy/geometry...
Proceedings Article

Comparison of the Cost Budget Plan and the Implementation Budget Plan (Cast In Indonesian’s Border Area)

Andrial Imran, Muhammad Syarif
In project implementation, it is also known as the Implementation Budget Plan. The Implementation Budget Plan is a real cost that is used during the course of the project until the activity is completed. So with the calculation of the RAP before submitting a tender, the contractor can estimate the total...
Proceedings Article

Distillation of Essential Oils from the Leaves and Stems of Citronella (Cymbopogon winterianus) Utilizing a Solar Energy-Based Steam Distillation Unit with a Photovoltaic Method

Elwina Elwina, Teuku Rihayat, dan Muhammad Hafid
The photovoltaic method with solar panel modules with a capacity of 100 Wp can absorb heat and convert it into electrical energy up to 100 watts/hour. It is used for the citronella oil refining process which requires 57,550 kJ of energy. By using 4 solar cell panels, within 4 h the power generated can...
Proceedings Article

A Concept of Developing Microgrid and Virtual Power Plant towards Grid Utility for the Better Electrification in Indonesia

Nelly Safitri, Taufik Taufik, Rahmi Berlianti, Rikki Vitria
In order to alleviate the stressful tension caused by the imbalanced power flow along the transmission and distribution feeders, the electric power utility in Indonesia may want to implement the trends of microgrid and VPP. As a result, the goal of this study is to develop a paradigm that captures the...
Proceedings Article

Design of Biofouling Level Classification System Using Haar-Cascade Classifier And Local Binary Pattern Histogram

Yuning Widiarti, Fasa Imana Faumi
The shipbuilding industry still faces challenges and problems. One of them is biofouling on ships, a major problem that can lead to increased fuel consumption and a higher risk of spreading invasive species. The shipbuilding industry is a strategic and competitive domestic industry that deserves to be...
Proceedings Article

Study Of Effectiveness By Using Seawalls With Slopes Of 1:3 And 1:5 On Run Up, Wave Reflection ​​And Overtopping At Selatbaru Beach Of Bengkalis

Zulkarnain Zulkarnain, Oni Febriani, Lizar Lizar
Selatbaru Beach is one of the mainstay tourist attractions in Bengkalis Regency after North Rhu Rupat Bay Beach. This beach area is located in the waters of the Melaka Strait, Malaysia. This beach has been built with coastal protection such as Breakwater, Groin and Seawall. The seawall that has been...
Proceedings Article

Evaluation Characteristics of Pedestrian Pathway in Coastal Area

Febriane Paulina Makalew, Deyke Junita Femeli Mandang, Steve Wilben Macquarie Supit, Sydney Aquino Worotikan
Research on pedestrian pathways in coastal areas is related to facilities provided and access in the area. The characteristic of coastal area is influenced by access to different types of surface material and seawater. Therefore, pedestrian pathway in this area has to focus on resistance design, safety,...
Proceedings Article

Saving Water Through Ergonomics Rainwater Harvesting Wells in Bali Indonesia

Lilik Sudiajeng, I Wayan Wiraga, I Ketut Gde Juli Suarbawa, M. Yusuf, R. S. Suryanegara Dwipa, Anak Agung Putri Indrayanti, Ni Wayan Sumetri
The main objective of this research is to assess the harvesting capacity of the deep rainwater harvesting wells as one of the solutions to prevent the ground water crisis. Water is life, for present and future generations. Groundwater is a renewable natural resource; however, over exploitation can cause...
Proceedings Article

Effect of Heat Input on the Tensile Strength and Hardness of Weld Metal Using ER410H as Filler Metal Without Heat Treatment

Usman Usman, Syukran Syukran, Azwinurc Azwinure, Teuku Rachmad Saputra
In the oil and gas exploration industry, martensitic stainless-steel (MSS) pipes are commonly employed for its corrosion and abrasion resistance. Binding materials with a thickness of less than 6 mm is typically accomplished using a TIG welding procedure with ER410H as the filler material. It is believed...
Proceedings Article

Zoning Planning Concept and Parking Idea at Manado State Polytechnic Campus

Dwars Soukotta, Teddy Takaendengan, Jeanely Rangkang, Sudarno Sudarno
The increasing number of human populations will also increase the transportation mobility. This case is clearly visible in a higher education where the increasing number of students can affect the number and types of transportation in the campus area which later on could cause the mobility disturbance...
Proceedings Article

Projection Of Water Availability And Needs In The Watershed Of Sungai Bolong Of Border Zone Indonesia-Malaysia

Maria Menung Migo, Yoseph Yoseph
Provision of raw water for community needs is a direct effort in improving community welfare as the main key of regional economic development. Embung Bolong is a place to supply raw water which is managed by PDAM Nunukan through IPA Nursery and IPA Pasir Putih to meet the needs of the community in Border...
Proceedings Article

D85-1 Transmission Maintenance and Repair (Case study: Maintenance and Repair of D85-1 Transmission Clutch Slip)

Al Amin, Halman Halman
Heavy equipment has several types depending on its function, and one of them is the dozer unit. Dozers are considered the most efficient heavy equipment units for mining activities, mainly digging, pushing, and pulling material. The transmission is a component of the Bulldozer’s drive system that regulates...
Proceedings Article

Performance Evaluation Of Traffic Light Intersection Three Bhayangkara Street – Ahmad Yani Street – White Sand Road Nunukan Indonesia

Yoseph Yoseph, Maria Menung Migo
Analyzing Road Service of Simpang Tiga Bhayangkara Street, Pembangunan Street, Pahlawan Street, Nunukan Sub-district, Nunukan District. Nunukan District is an area located on the border line between the Republic of Indonesia and Malaysia (Sabah and Serawak), the position of the strategy makes the region...
Proceedings Article

Physical and Chemical Characteristics of Compost from Pterocarpus indicus Using Banana Hump Local Microorgansim, Eisenia foetida and Eudrilus eugeniae Earthworms

Vivin Setiani, Ayu Nindyapuspa, Athi’ Farida
The higher the generation of Pterocarpus indicus, the higher the environmental pollution. This can be overcome by vermicomposting. To improve the quality of the compost, it is necessary to add cow dung and sawdust to the compost. In this study, vermicomposting used the earthworms Eisenia fetida and Eudrilus...
Proceedings Article

Construction of an Automatic Hydroponic Nutrient Control System Based on Arduino Uno

Fauzan Amri, Karsid Karsid, Bobi Khoerun, Indra Fitriyanto, Hadi Prayietno, Tri Haryanti
This work designs a hydroponic nutrient control system using Arduino Uno as the control center. This control system is not directly applied to hydroponic installations but is only limited for observing the performance of control system within a predetermined nutrient range. When the system starts working,...
Proceedings Article

Modification Design of Solar Tracker and MPPT on Photovoltaic Systems using PSO based Fuzzy Type-2 Controller

Jauharotul Maknunah, Ali Musyafa, Imam Abadi, Dwi Nur Fitriyanah
Photovoltaic (PV) systems are a promising renewable energy source, but their efficiency is affected by the angle of incidence of sunlight. It is necessary to have a control system for both light capture and optimizing PV power output. When capturing sunlight by PV, a conditioner is needed in the form...
Proceedings Article

The Analysis of Variations in Peak Time Values With Disturbance on DC Motors Using Robust Tracking Control

Devi Handaya, Ammar Abdurrauf, Salma Sonia Jneina Sagiri
DC motors are actuators that have very popular functionality in the industry. DC motors can easily design and implement actuators using robust tracking control methods. This study aims to achieve a stable output signal according to the desired reference and remain robust against interference by using...
Proceedings Article

Analysis Graph-Based Data Model For Simple Search Application Using NER Data

Ade Hodijah, Trisna Gelar
Analysis of the seven steps of the Graph Data Modeling approach to obtain application functionality by utilizing the links (relationships) between entities (nodes) of the Named Entity Recognition (NER) entities was the aim of this study. The seven steps have two main models: the Initial and the Refactoring...
Proceedings Article

IoT-Based Monitoring Of Voltage, Current And Power Of Solar Panel Units

Zainal Abidin, Wan M. Faizal, Hikmatul Amri, Nirwan Budiyanto, Azizul Azizul
This research uses a NodeMCU ESP8266 microcontroller and an INA219 sensor to monitor voltage, current and power in a solar power generation system, then the data will be sent via the internet to Blynk. The monitoring results are read on the LCD and smartphone by testing the solar panel unit...
Proceedings Article

Effect of Variations in Treatment Using an Autoclave on Mortar Made from Rice Husk Ash and Fly Ash

M. Shofi’ul Amin, Mirza Ghulam Rifqi
Mortar is a mixture of cement, fine aggregate and water which is generally used in non-structural work. In this research, in addition to using normal mortar to determine the compressive strength value that occurred, an innovation was made to the mortar mixture by adding fly ash and rice husk ash with...
Proceedings Article

Income Analysis of Seaweed Farming in Tanjung Harapan Village Sub-District Nunukan Selatan Nunukan District

Basran, Arman, Harizatul Jannah
This research aims to recognize the feasibility of seaweed farming in Tanjung Harapan Village, Nunukan Selatan District, Nunukan Regency. The population in this study is all seaweed farmers in the Tanjung Harapan Village. The sample was taken by 15% of the existing population of 20 seaweed farmers. Data...
Proceedings Article

The Development of Meta data Extractor Plugin for Open Journal System

Muhammad Isyak Rizqi, Moch. Zawaruddin Abdullah, Muhammad Afif Hendrawan
Scientific articles are scholarly publications that present objective and verifiable information pertaining to study findings and literature reviews. These articles are typically disseminated through reputable scientific journals. The Open Journal System (OJS) is an open-source platform that facilitates...
Proceedings Article

Experimental Study of Multistage Rotor in Gravitational Water Vortex Turbine System with Various Gap Placement Positions and Blade Phase-Shift Angles

Muhammad Luthfi, Leo Gunawan, Muhamad Ghozali, Reza Aditya, Saeful Anwar
Gravitational Water Vortex Turbine (GWVT) has the advantage of harnessing hydro flow energy from the low head. Several research have been conducted to optimize the performance of this turbine type, one of which is by applying multistage rotor. This work is to study the effect of gap placement and phase...
Proceedings Article

Design and Build a Smart Door Lock Using Face Recognition

Rizky Aprylianto Susilo, Dicky Chandra, Abdul Hamid Kurniawan, Hari Subagyo
The door has become an access point to a house where it is used for entering and exiting. Security is one of the crucial factors in a residence. Criminal activities often occur by tampering or breaking the lock system of the house door. Currently, the security of house doors generally still relies on...
Proceedings Article

Analysis of Stunting Spread in Mentawai Islands Regency Using K-Means Clustering Method

Andrew Kurniawan Vadreas, Gybran Nauval Yuhandika, Harfebi Fryonanda, Muhammad Irvandi Lubis, Ulya Ilhami Arsyah, Dwi Welly Sukma Nirad
This research addresses the critical issue of child health and nutrition in the Mentawai Islands Regency, particularly stunting. Given the limited understanding among parents, the local Community Health Center (Puskesmas) has taken the initiative to conduct stunting mapping in the Mentawai Islands. The...
Proceedings Article

Prediction of PV Power Output and Battery Charging Conditions on OFF Grid Systems MicroHydro Pantai Bantul Yogyakarta Using Rule-Based Algorithm

Norma Mahmudah, Ibrahim Saiful Millah, A. Labib Fardany Faisal, Luki Septya Mahendra, Agus Dwi Santoso, Retia Arnofal, Moh Rahbini
Energy Management System (EMS) is used as a renewable energy control strategy. This research uses photovoltaics and wind turbines, which is a suitable combination because photovoltaics work during the day while wind turbines can supply batteries that are used at night. The Energy Management System (EMS)...
Proceedings Article

Design and Optimization of CNC Milling Process Based on Vibration System Detector Using Particle Swarm Optimization Algorithm Method

Chairul Anam, Abdul Rohman, Eka Mistiko Rini, Mahros Darsin
Machine maintenance in industry requires speed and convenience, one method is vibration analysis. Engine vibrations cause a pattern of sound emitted by the engine, where the sound of one engine mixes with the sound of another engine. Excessive vibration levels in the engine indicate damage to engine...
Proceedings Article

Electropneumatic Systems Modification Analysis for Automatic Weighing with Cosmetics Industry Study Case

Abdul Syukur Alfauzi, Dicky Mileno, Farika Tono Putri, Wahyu Isti Nugroho, Timotius Anggit Kristiawan, Ampala Khoryanton, Yusuf Dewantoro Herlambang
PT ABC is company located in Semarang, Indonesia which engaged in cosmetics and castor oil production. One of main product of the company is face powder. According to observation there was a problem occur in the face powder production department. These problems are the results of inconsistent product...
Proceedings Article

Experimental Study of Tofu Processing Using a Horizontal Mini Boiler Fueled by Wood and Coconut Shell

Abdul Gafur, Erwin Martinis
The use of boilers in the tofu processing process is very helpful for Small and Medium Enterprises (SMEs). Heating using a boiler shows a greater increase in efficiency compared to using conventional methods. The use of a vertical boiler is considered less efficient for use in the tofu processing process...
Proceedings Article

Design and Implement a Smart Conveyor System for Sorting Eggs Based On Quality and Weight

Afandi Nur Aziz Thohari, Tri Raharjo Yudantoro, Slamet Handoko, Adisti Khairunnisa Nuzli, Ardhi Yahya, Parsumo Raharjo
Eggs are a common and accessible culinary item. Eggs are a vital source of nutrients for the human body and have a high nutritional value. Selecting high-quality eggs is essential since low-quality eggs can have a negative impact on health. Due to the human eye’s limited capacity to accurately sort vast...
Proceedings Article

Performance Evaluation of Bottle Press Machine MQTT Data Acquisition

Heru Wijanarko, Ahsani Abdun, Diono Diono, Prasaja Wikanta, Hamdani Arif, Asrizal Deri Futra
MQTT (Message Queuing Telemetry Transport) is a communication protocol designed for connecting devices in scenarios like machine-to-machine interactions and the Internet of Things (IoT). It excels in resource -constrained environments, slow data connections, and situations with data transmission delays....
Proceedings Article

Neural Network Analysis For The Detection Of Brain Tumors Using Orange Application

Prayitno Prayitno, Kurnianingsih, Ajeng Mutiara Charisma, Rizal Nugroho
As digital imaging assumes crucial roles in the treatment of MRI images, X-ray images will be employed for evaluation and to detect tumor growth in the human body in the restorative field. As the tumor develops in the skull, it can cause extreme brain pressure and interfere with previously normal brain...