Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Construction of an Automatic Hydroponic Nutrient Control System Based on Arduino Uno

Authors
Fauzan Amri1, *, Karsid Karsid1, Bobi Khoerun1, Indra Fitriyanto1, Hadi Prayietno2, Tri Haryanti2
1Instrumentation and Control Engineering Technology, Politeknik Negeri Indramayu, West Java, Lohbener, Indonesia
2Refrigeration Engineering and Air Conditioning, Politeknik Negeri Indramayu, Lohbener, West Java, Indonesia
*Corresponding author. Email: fauzanamri@polindra.ac.id
Corresponding Author
Fauzan Amri
Available Online 17 February 2024.
DOI
10.2991/978-94-6463-364-1_83How to use a DOI?
Keywords
Nutrient control system; Arduino Uno; TDS value; Control system stability
Abstract

This work designs a hydroponic nutrient control system using Arduino Uno as the control center. This control system is not directly applied to hydroponic installations but is only limited for observing the performance of control system within a predetermined nutrient range. When the system starts working, the TDS sensor will read the suitability of the nutritional value in the container with the preset TDS value range. From the experimental results, the control system can work according to the commands given. The nutrient valve turns on when the nutrient level in the container is less than 1000 ppm and the valve will stop when the nutrient level is more than 1200 ppm. The stability of this control system was also evaluated by providing an annoyance into container. The result shows that the control system has good stability because it can maintain nutrient value according to the organized set point.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
17 February 2024
ISBN
10.2991/978-94-6463-364-1_83
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_83How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Fauzan Amri
AU  - Karsid Karsid
AU  - Bobi Khoerun
AU  - Indra Fitriyanto
AU  - Hadi Prayietno
AU  - Tri Haryanti
PY  - 2024
DA  - 2024/02/17
TI  - Construction of an Automatic Hydroponic Nutrient Control System Based on Arduino Uno
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - 911
EP  - 918
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_83
DO  - 10.2991/978-94-6463-364-1_83
ID  - Amri2024
ER  -