Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
251 authors
- Alexandru, Cătălin
- Dynamic Optimization of the Controller for the Active Suspension System of a Race Car
- Ancuța, Alexandru-Adrian
- Modeling the Characteristics of an Electric Propulsion System for a Small Vehicle
- Atanasiu, Gabriel
- FEM Analysis of a Robotic System Used in Concrete Spray Procedures
- Baloșin, Ionel
- Intelligent Transport Systems Used in Inland Waterway Transport and Their Contribution to Pollution Prevention
- Baloșin, Ionel
- Evaluation of Residual Stress In Specific Welded Nodes of River Ships
- Beles, Horia
- Study of Heat Transfer in the Walls of the Body Superstructure of a Vehicle for Transporting Frozen Meat Carcasses
- Benga, Gabriel
- Differential Thermal Analysis in Microwave Hybrid Field of Some Composite Ceramic Materials
- Benga, Gabriel Constantin
- Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems
- Benga, Gabriel Constantin
- Analysis of CO₂ Emissions for a Supercharged Engine and a Series–Parallel Hybrid System
- Bica, Marin
- Pollution Caused by Thermal Engines When Using Biofuels
- Bica, Marin
- The Influence of Sliding Pressure Operation on Some Elements of the Thermal Cycle
- Bica, Marin
- Analysis of Turning Process of Pure Titanium Using Finite Element Method
- Bica, Marin
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Bica, Marin
- Evaluation Methods of Energy Performances in Buildings
- Boborelu, Cristian
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Bogdan, Adrian
- Applications of Some Extremal and Variational Problems to the Study of Vibrations in Mechanical Systems
- Bogdan, Mihaela
- Applications of Some Extremal and Variational Problems to the Study of Vibrations in Mechanical Systems
- Bolcu, Alexandru
- Structure-Related Non-uniformities in Composite Bars Made of Hybrid Dammar-Based Resin and Reinforced with Natural Fiber Fabrics
- Bolcu, Alexandru
- Adding Some Remarks Concerning the Dzahanibekov Effect
- Buciu, Gabriel
- A Personalized Three-Dimensional Model of a Patient Using CT Images
- Buciu, Gabriel
- Modeling and Simulation of an Orthodontic System of a Real Patient Starting from CBCT Images
- Burada, Cristian Oliviu
- The Link Between Historical Research and Structural Rehabilitation in the Case of Palace Building from Craiova
- Burada, Cristian Oliviu
- Strategy for Facade Restoration in Case of Craiova’s City Hall Building
- Burada, Cristian Oliviu
- New Strength Degradation of Bouc-Wen Hysteresis Differential Model for Romanian Anti-Seismic Devices Used in Buildings Seism Protection Systems
- Burnete, Nicolae
- Aspects of Measuring Brake Parameters on Heavy Trucks Using a Roller Brake Stand
- Bățăuș, Marius-Valentin
- Study of CO₂ Emissions in Platoon Driving
- Calbureanu, Madalina
- Study on the Comfort Microclimate at the Educational Building in Research Laboratories
- Capata, Dorin
- Aspects of Measuring Brake Parameters on Heavy Trucks Using a Roller Brake Stand
- Castravete, Ştefan Cristian
- Analysis of a Cantilevered Beam Using FEMCAS
- Castravete, Ștefan Cristian
- Analysis of a Cantilevered Beam Under Parametric Uncertainties
- Cernaianu, Corina
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Cernăianu, Adrian
- Studies on the Influence of Process Technological Parameters on Geometric Accuracy in 3D Printing of PLA Parts by FFF Printing Technology
- Cernăianu, Adrian
- Study of the Stop Phenomena at the End Sliding Plate Movement with Reciprocating Rectilinear Motion Driven by Direct Current Motors
- Cernăianu, Corina
- Studies on the Influence of Process Technological Parameters on Geometric Accuracy in 3D Printing of PLA Parts by FFF Printing Technology
- Cernăianu, Corina
- Study of the Stop Phenomena at the End Sliding Plate Movement with Reciprocating Rectilinear Motion Driven by Direct Current Motors
- Cherciu, Mirela
- Ellipse’s Versiera – Structure and Kinematics of the Generator Mechanism
- Cherciu, Mirela
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Chiru, Anghel
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Ciunel, Stefanita
- Comparative Studies of the Behavior of Anthropometric Test Devices at Frontal Impact
- Ciurezu-Gherghe, Leonard
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Ciurezu-Gherghe, Leonard
- Design and 3D Printing of a Mini Vacuum Table with FDM Technology
- Ciurezu-Gherghe, Leonard Marius
- Applications of Some Extremal and Variational Problems to the Study of Vibrations in Mechanical Systems
- Ciurezu-Gherghe, Leonard Marius
- Adding Some Remarks Concerning the Dzahanibekov Effect
- Clinciu, Mihai
- Comparative Studies of the Behavior of Anthropometric Test Devices at Frontal Impact
- Codita, Alina Mariana
- Study on the Comfort Microclimate at the Educational Building in Research Laboratories
- Codiţă, Alina
- Influence of Damping Coefficient Value of Fluid Viscous Damperson Seism Behavior of a Ten Stories Building Using ETABS Software
- Coltescu, Sebastian
- Analysis and Design of a Historical Bicycle Mechanism, Without Chain
- Constantin, Cornel
- Study of CO₂ Emissions in Platoon Driving
- Constantinescu, Augustin
- Determination of the Probability of Failure of the Starter of a Passenger Car
- Constantinescu, Mircea Cătălin
- Navigation Testing Procedures for the ENDORO Robotic System
- Copilusi, Cristian
- Design of a Parameterized Mannequin Using Rapid Prototyping Technology
- Copilusi, Cristian
- Kinematic and Dynamic Analysis of a Mechanism for Assisting Human Locomotion
- Copilusi, Cristian
- Experimental Approaches Regarding a Children Rehabilitation Test Bed
- Corzanu, Andrei
- Design of Double Oscillating Sliding Mechanism
- Corzanu, Andrei
- Computer-Aided Kinematic Analysis of Two-Movement Follower Mechanism
- Corzanu, Valentin
- Design of Double Oscillating Sliding Mechanism
- Corzanu, Valentin
- Computer-Aided Kinematic Analysis of Two-Movement Follower Mechanism
- Craciun, Dan
- Study of Heat Transfer in the Walls of the Body Superstructure of a Vehicle for Transporting Frozen Meat Carcasses
- Craciunoiu, Nicolae
- Analysis of Turning Process of Pure Titanium Using Finite Element Method
- Craciunoiu, Nicolae
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Cretu, Simona-Mariana
- Analysis and Design of a Historical Bicycle Mechanism, Without Chain
- Cretu, Simona-Mariana
- Computer-Aided Kinematic Analysis of Two-Movement Follower Mechanism
- Cãlbureanu, Diana
- Study of the Influence of the Thermal Insulation System on the State of Stress, Deformation and Vibration of a Rehabilitated Building with a Structure of Reinforced Concrete Frames
- Cãlbureanu, Mãdãlina
- Study of the Influence of the Thermal Insulation System on the State of Stress, Deformation and Vibration of a Rehabilitated Building with a Structure of Reinforced Concrete Frames
- Călbureanu, Diana
- Influence of Damping Coefficient Value of Fluid Viscous Damperson Seism Behavior of a Ten Stories Building Using ETABS Software
- Călbureanu, Diana
- Comparison Between the Results Obtained in Static and Modal Seism Simulations of Tall Buildings Using ETABS
- Călin, Mihăiţă-Costin
- Selective Laser Sintering of Ti Alloy Powders for Hip Implants
- Danciu, Grigore
- Modeling the Characteristics of an Electric Propulsion System for a Small Vehicle
- Dascalu, Ionela Teodora
- Modeling and Simulation of an Orthodontic System of a Real Patient Starting from CBCT Images
- David, Andrej
- Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems
- David, Andrej
- Evaluation of Residual Stress In Specific Welded Nodes of River Ships
- Demian, Gabriela
- Integrated AHP and SAW Methods for Selection Green Building Materials for Insulations
- Demian, Mihai
- Integrated AHP and SAW Methods for Selection Green Building Materials for Insulations
- Didu, Anca
- Internal Turning of the Polytetrafluoroethylene (Teflon) at High Feed
- Dobrev, Vasko
- Advanced Design Optimization Procedures for Worm Gear Drives
- Dobreva, Antoaneta
- Advanced Design Optimization Procedures for Worm Gear Drives
- Dragoi, Mircea-Viorel
- A Comparative Approach on Successive vs Simultaneous Drilling
- Dumitru, Ilie
- Peer-Review Statements
- Dumitru, Ilie
- Comparative Analysis of Pedestrian Throwing Distance Following a Collision with a Vehicle
- Dumitru, Ilie
- Study of the Influence of Speed and Type of Roads on Vibrations Transmitted to an Electric Tractor Driver
- Dumitru, Ilie
- Study Concerning Contact Strain and Stresses in Radial-Axial Bearings
- Dumitru, Ilie
- Experimental Stand to Investigate the Sealing Properties of Piston Rings Used in Automotive Industry
- Dumitru, Ilie
- Consideration on New Application for Rotary Engine
- Dumitru, Nicolae
- Kinematic and Dynamic Analysis of a Mechanism for Assisting Human Locomotion
- Dumitru, Nicolae
- Structure-Related Non-uniformities in Composite Bars Made of Hybrid Dammar-Based Resin and Reinforced with Natural Fiber Fabrics
- Dumitru, Nicolae
- FEM Analysis of a Robotic System Used in Concrete Spray Procedures
- Duta, Alina
- Ellipse’s Versiera – Structure and Kinematics of the Generator Mechanism
- Duta, Alina
- A Personalized Three-Dimensional Model of a Patient Using CT Images
- Duta, Alina
- Modeling and Simulation of an Orthodontic System of a Real Patient Starting from CBCT Images
- Florescu, Simona
- FEM Analysis of a Robotic System Used in Concrete Spray Procedures
- Frățilă, Gheorghe
- Modeling the Characteristics of an Electric Propulsion System for a Small Vehicle
- Frățilă, Gheorghe
- Study of CO₂ Emissions in Platoon Driving
- Frățilă, Gheorghe
- CAE Approach in Combustion Modeling on a Classic Internal Combustion Engine and Ignition Timing Modeling
- Gencărau, Nicoleta
- Study Concerning Contact Strain and Stresses in Radial-Axial Bearings
- Geonea, Ionut
- Design of a Parameterized Mannequin Using Rapid Prototyping Technology
- Geonea, Ionut
- Kinematic and Dynamic Analysis of a Mechanism for Assisting Human Locomotion
- Geonea, Ionut
- Applications of Some Extremal and Variational Problems to the Study of Vibrations in Mechanical Systems
- Geonea, Ionut
- Experimental Approaches Regarding a Children Rehabilitation Test Bed
- Geonea, Ionut
- Study Concerning Contact Strain and Stresses in Radial-Axial Bearings
- Geonea, Ionut
- Experimental Stand to Investigate the Sealing Properties of Piston Rings Used in Automotive Industry