Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

Evaluation of Residual Stress In Specific Welded Nodes of River Ships

Authors
Dănuț Savu1, *, Adrian Olei1, Andrej David2, Sorin Savu1, Iulian Ștefan1, Ionel Baloșin1, Angelo Midan1
1University of Craiova, 200585, Craiova, Romania
2University of Žilina, Žilina, Slovakia
*Corresponding author. Email: ionel.savu@edu.ucv.ro
Corresponding Author
Dănuț Savu
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_48How to use a DOI?
Keywords
stress; welding; ship’s structure; inland ships
Abstract

Rivers ships are complex welded structures, built of specific volume sections. Each volume section contains tens or hundreds of nodes, characterized by high restraint conditions. Due to the welding process, each node experiences local concentration of stresses. The paper aims to present a double, analytical and practical, evaluation of the residual stresses in a part of the double bottom deck. It has been built a physical model of such part of the double bottom deck and welding process was applied. The displacement was measured and the residual stress was obtained. It has been concluded that each new welding pass produced lower shrinkage than the previous one. A similar geometrical model was defined and simulated in FEM software. The results confirmed the results of the practical tests. It was, also, found that the cooling between the welding passes produced sudden variations of the displacements, all being in the sense of reducing the opening of the groove.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-152-4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_48How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Dănuț Savu
AU  - Adrian Olei
AU  - Andrej David
AU  - Sorin Savu
AU  - Iulian Ștefan
AU  - Ionel Baloșin
AU  - Angelo Midan
PY  - 2023
DA  - 2023/05/30
TI  - Evaluation of Residual Stress In Specific Welded Nodes of River Ships
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 431
EP  - 440
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_48
DO  - 10.2991/978-94-6463-152-4_48
ID  - Savu2023
ER  -