Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

<Previous Article In Volume
Next Article In Volume>

Design of a Parameterized Mannequin Using Rapid Prototyping Technology

Authors
Cristian Copilusi1, *, Ionut Geonea1, Cristian Vladu2, Alexandru Margine1
1Faculty of Mechanics, University of Craiova, Calea Bucuresti 107, Craiova, Romania
2Faculty of Automation, Computers and Electronics, University of Craiova, Decebal Street 107, Craiova, Romania
*Corresponding author. Email: cristian.copilusi@edu.ucv.ro
Corresponding Author
Cristian Copilusi
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_4How to use a DOI?
Keywords
rapid prototyping; 3D printing technology; mannequin; exoskeleton
Abstract

This research addresses to a mannequin design in a parameterized mode similar to a four years old child. The designed mechanical system will be integrated in an active exoskeleton, especially designed for children with locomotion problems. Thus there will be performed measurements for a four years old child, in order to acquire the anthropometric data which will be used for mannequin segments design. The mannequin will have a similar design with the ones used in automotive industry at Euro NCAP tests. The finalized prototype will be obtained based on 3D- printing technology.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
10.2991/978-94-6463-152-4_4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_4How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Cristian Copilusi
AU  - Ionut Geonea
AU  - Cristian Vladu
AU  - Alexandru Margine
PY  - 2023
DA  - 2023/05/30
TI  - Design of a Parameterized Mannequin Using Rapid Prototyping Technology
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 27
EP  - 35
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_4
DO  - 10.2991/978-94-6463-152-4_4
ID  - Copilusi2023
ER  -