Analysis of Milling Process of Aluminum Alloy Using Finite Element Method

Emil Nicusor Patru; Marin Bica; Nicolae Craciunoiu; Ionut Geonea; Dumitru Panduru; Leonard Ciurezu-Gherghe

doi:10.2991/978-94-6463-152-4_51

<Previous Article In Volume

Next Article In Volume>

Analysis of Milling Process of Aluminum Alloy Using Finite Element Method

Authors

Emil Nicusor Patru¹^{, *}, Marin Bica¹, Nicolae Craciunoiu¹, Ionut Geonea¹, Dumitru Panduru¹, Leonard Ciurezu-Gherghe¹

¹Faculty of Mechanics, University of Craiova, 200512, Craiova, Romania

^*Corresponding author. Email: nick_emyl@yahoo.com

Corresponding Author

Emil Nicusor Patru

Available Online 30 May 2023.

DOI: 10.2991/978-94-6463-152-4_51 How to use a DOI?
Keywords: Aluminum alloy; 3D model; Finite element analysis; Stress; Deformations
Abstract: Due to the tendencies to deform the component during milling process, and, as it is known, this can affect the dimensional characteristics, and not only, is very important to evaluate total deformation, equivalent elastic strain, equivalent stress, directional deformation, on X, Y and Z axis, shear elastic strain using the finite element analysis method for milling process of aluminum alloys.

In order to perform this analysis, a 3D model of the assembly is developed, with respect the real dimensions for each component, part and tool, respectively. Then, 3D model was transfer to the finite element analysis software, where, the results were obtained. For 3D model and finite element analysis, the dedicated software is used.
Copyright: © 2023 The Author(s)
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series: Atlantis Highlights in Engineering
Publication Date: 30 May 2023
ISBN: 10.2991/978-94-6463-152-4_51
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-152-4_51 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Emil Nicusor Patru
AU  - Marin Bica
AU  - Nicolae Craciunoiu
AU  - Ionut Geonea
AU  - Dumitru Panduru
AU  - Leonard Ciurezu-Gherghe
PY  - 2023
DA  - 2023/05/30
TI  - Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 455
EP  - 461
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_51
DO  - 10.2991/978-94-6463-152-4_51
ID  - Patru2023
ER  -

download .riscopy to clipboard