Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

Analysis of Turning Process of Pure Titanium Using Finite Element Method

Authors
Dumitru Panduru1, *, Marin Bica1, Nicolae Craciunoiu1, Ionut Geonea1, Emil Nicusor Patru1
1Faculty of Mechanics, University of Craiova, 200512, Craiova, Romania
*Corresponding author. Email: dumitru_panduru23@yahoo.com
Corresponding Author
Dumitru Panduru
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_50How to use a DOI?
Keywords
Pure titanium; 3D model; Finite element analysis; Stress; Deformations
Abstract

In this paper finite element analysis is applied to evaluate the results regarding the stress and deformation during the turning process of the commercially pure titanium. The results are a very important task to appreciate the state of the piece, from point of view of stress and deformations, during the machining process.

In order to perform this analysis, a 3D model of the assembly is developed, with respect to the real dimensions for each of the components, part and tool, respectively. Then, the 3D model was transferred to the finite element analysis software, where, starting with the input data, meaning the mechanical properties of the pure titanium, the appropriate mesh and loading applied, but also interactions between the bodies, the results of the analysis, were obtained. For 3D model and finite element analysis, the dedicated software is used.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-152-4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_50How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Dumitru Panduru
AU  - Marin Bica
AU  - Nicolae Craciunoiu
AU  - Ionut Geonea
AU  - Emil Nicusor Patru
PY  - 2023
DA  - 2023/05/30
TI  - Analysis of Turning Process of Pure Titanium Using Finite Element Method
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 449
EP  - 454
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_50
DO  - 10.2991/978-94-6463-152-4_50
ID  - Panduru2023
ER  -