Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems

Authors
Sorin Vasile Savu1, *, Robert Cristian Marin1, Andrej David2, Adrian Bebe Olei1, Ionel Danut Savu1, Iulian Stefan1, Gabriel Constantin Benga1
1University of Craiova, 200585, Craiov, Romania
2University of Zilina, Zilina, Slovak Republic
*Corresponding author. Email: sorin.savu@edu.ucv.ro
Corresponding Author
Sorin Vasile Savu
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_36How to use a DOI?
Keywords
microwave heating; thermal field; NOx emissions
Abstract

The cold start effect of combustion engines leads to high rate of NOx emissions because the gases temperature of the exhauster is lower than the functioning temperature of selective catalyst reduction systems. This paper aim to present preliminary research, in terms of modelling the thermal field and experimental procedure, for heating the exhaust gases using microwave heating. The experimental procedure was focused on different levels of microwave injected power from 600 W to 3000 W. Two sources of gas were considered in experimental procedure: Corgon with flow rate from 5 l/min to 30 l/min and compressed air at 4 bar pressure. The results of thermal field simulation revealed levels of temperature up to 113 °C. The simulation has been validated by experimental procedure where the levels of temperature were 140 °C for Corgon at 1800 W microwave injected power and 120 °C for compressed air.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-152-4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_36How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Sorin Vasile Savu
AU  - Robert Cristian Marin
AU  - Andrej David
AU  - Adrian Bebe Olei
AU  - Ionel Danut Savu
AU  - Iulian Stefan
AU  - Gabriel Constantin Benga
PY  - 2023
DA  - 2023/05/30
TI  - Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 322
EP  - 330
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_36
DO  - 10.2991/978-94-6463-152-4_36
ID  - Savu2023
ER  -