Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

<Previous Article In Volume
Next Article In Volume>

Navigation Testing Procedures for the ENDORO Robotic System

Authors
Răzvan Sabin Stan1, *, Gabriel Gruionu2, Anca Loredana Udriștoiu3, Andreea Valentina Iacob3, Mircea Cătălin Constantinescu3, Lucian Gheorghe Gruionu1
1Faculty of Mechanics, University of Craiova, Craiova, Romania
2Department of Medicine, Indiana University School of Medicine, Indianapolis, USA
3Faculty of Automation, Computers and Electronics, University of Craiova, Craiova, Romania
*Corresponding author.
Corresponding Author
Răzvan Sabin Stan
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_20How to use a DOI?
Keywords
Lung Cancer; Robotic System; Electromagnetic Navigation; 3D-Printed Lung; ENDORO Robot Prototype; Testing
Abstract

Lung cancer is the leading cause of death among different type of cancers worldwide. To decrease the recorded mortality rates, earlier diagnosis and timely treatment are essential. The two-degrees-of-freedom robotic and image guided navigation system, ENDORO is designed to find peripheral pulmonary nodules using an electromagnetic tracking equipment, a navigation software and a specially designed biopsy catheter. The aim of the present study was to assess the accuracy of the ENDORO system in a rigid lung phantom built from a set of computerized tomography scans of a patient. We describe the testing environment, necessary configurations and navigation results for main lung airways. The evaluation consists in identifying all navigable paths from the entry point to the lung periphery, counting the number of intersection crossing, the time required for navigation and the number of movements the robot performed. The results demonstrate appropriate navigation accuracy for catheters with a rigid tip. Future studies will test robotic navigation with a catheter with a bending tip.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
10.2991/978-94-6463-152-4_20
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_20How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Răzvan Sabin Stan
AU  - Gabriel Gruionu
AU  - Anca Loredana Udriștoiu
AU  - Andreea Valentina Iacob
AU  - Mircea Cătălin Constantinescu
AU  - Lucian Gheorghe Gruionu
PY  - 2023
DA  - 2023/05/30
TI  - Navigation Testing Procedures for the ENDORO Robotic System
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 175
EP  - 182
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_20
DO  - 10.2991/978-94-6463-152-4_20
ID  - Stan2023
ER  -