Atlantis Highlights in Engineering

+ Advanced search
2112 articles
Proceedings Article

Demonstration of German Energy Transition in Zwickau (ZED) - Presentation of Concept

Dimitri Nefodov, Shengqing Xiao, Thorsten Urbaneck
This paper discusses the general conception of a local district heating system for the implementation of a zero-emission quarter in Zwickau (living lab). The heat supply is to be provided by regenerative energy sources. For this purpose, solar thermal collectors, seasonal thermal energy stores, an electrical...
Proceedings Article

Distribution System Planning with Battery Storage using Multiperiod Optimal Power Flow

Jaap Pedersen, Birgit Schachler, Anya Heider, Guido Pleßmann
The ongoing energy transition introduces new challenges for distribution networks and brings about the need to expand existing power grid capacities. In order to contain network expansion and with it economic costs, utilization of various flexibility options to reduce expansion needs is discussed. This...
Proceedings Article

Tofu Industrial Wastewater Treatment by Electrocoagulation Method

Ibnu Hajar, Fadarina, Mustain Zamhari, Selastia Yuliati
Tofu waste liquid contains high levels of organic impurities, such as protein and amino acids. These organic compounds cause the tofu industrial wastewater to contain high biological oxygen demand (BOD), chemical oxygen demand (COD), pH and total suspended solid (TSS) which can pollute the environment....
Proceedings Article

Stability and deformation control of deep foundation pits of half covered excavation subway in soft soil

Jianpeng Qin, Jie Yuan, Xiang Xiao, Yiheng Pan
A three-dimensional analysis model was established by finite element simulation to study the deformation and internal force changes of the cover plate, enclosure structure, support system, and surrounding soil during the excavation process of deep foundation pit at the Tatou Station of Fuzhou Metro Line...
Proceedings Article

Experimental Study on Sound Absorption Performance of a New Inorganic Sound-absorbing Material

Maowei Chen, Zhiyan Lin, Weigang Bai, Junwu Xia
A new inorganic sound-absorbing material is proposed with the background of the subways reduce the noise pollution by grouting behind the track wall. By using the standing wave tube method, we investigate the sound absorption coefficients of this new inorganic sound-absorbing material with water cement...
Proceedings Article

Design and efficiency analysis of biogas engineering for the mixture of kitchen waste and garden waste

Man Zhou, Lihao Deng, Han Li, Zhiyong Zou
In view of the characteristics of food waste, large volume and constant output in universities, taking a Chinese University as an example, we explored the centralized mode of kitchen waste biogas disposal in universities. The anaerobic fermentation technology is the core of the design, and the "canteen...
Proceedings Article

DLADRC Controller Parameter Tuning Based on IPSO Algorithm for Quadrotor

Yao Boyu, Lu Ping, Yang Seng, Ji Jinjian
ADRC controller has the advantages of simple structure, high precision and strong robustness, which can estimate and compensate the uncertainties and disturbances online. However, in practical application, it is found that the controller contains too many parameters, and the range and tuning direction...
Proceedings Article

Utilization of the Kelekar River Flow as Micro-Hydro Power Plant

Indrayani Indrayani, Aida Syarif, Syahirman Yusi, M. Noviansyah Nugraha, R.C. Ramadhani
The number of rivers scattered throughout Indonesia can certainly be used as an alternative energy source, one of which is micro-hydro power plants, it is a power plant that uses water resources on a small scale as a turbine drive to produce electrical energy, where the generation of this energy is influenced...
Proceedings Article

Design of Load Carrier Composite Reinforcement of Zero Generation of an Electric Car Frame

Ladislav Ševčík, Martina Ryvolová
The aim of the article is to report the methods of solving the construction of the electric car frame. The electric car is designed for movement in the field. This is a functional model marked generation 0. The electric car should move in the field according to the specified trajectories with a load...
Proceedings Article

Self-Adaptive Load Balancing System for Grid Computing

Irfan Darmawan, Aradea Aradea
Load balancing is a necessary way of a computer network infrastructure services, with the aim of balancing of computing resources to achieve optimal load processing time. When this has been many methods that can be used for load balancing techniques, namely by adjusting the load on the computing resources...
Proceedings Article

Tailings Dam’s Safety Assessment Considering Undrained Foundation Failure

Flávia Augusta Padovani, Thiago Bretas
During construction and raising phases of tailings dams, excess pore pressures and localized deformations (plasticization zones) may develop due to applied overloads. Therefore, it can develop an undrained shearing in contractile materials, as tailings and foundation soils. In this case, the design of...
Proceedings Article

Selective Laser Sintering of Ti Alloy Powders for Hip Implants

Florin Isvoranu, Cristina-Marilena Nițu, Ștefan Ilaș, Constantin Țigăneșteanu, Mihăiţă-Costin Călin, Mihaiela Iliescu
Selective Laser Sintering, SLS, is a rapid prototyping technique, based on additive manufacturing. It enables fast, flexible, and efficient manufacturing of complex parts, customized according to the requirements of users. Research results on SLS additive manufacturing technique and its specific materials,...
Proceedings Article

Experimental Study on Methane Yield influenced by Biogas Project Fermentation Temperature

Man Zhou, Luyao Guo, Siqi Liu, Zhiyong Zou
We tried to understand the differences in the biogas production characteristics of anaerobic sludge digestion at moderate and high temperature. Based on the three-stage theory of anaerobic fermentation, using cellulose, glucose and acetate as substrates, this study compared and analyzed the methanogenic...
Proceedings Article

Optimization of Slice Thickness, Drying Method, and Temperature of Turmeric Rhizome (Curcuma Longa L.) Based on Water Content and Functional Compound Degradation

Pirim Setiarso, Nita Kusumawati, Rusijono Rusijono, Supari Muslim
The research of oven-based drying technology on the production process of turmeric rhizome (Curcuma Longa L.) with thickness 0.15 and 0.30 cm have been. A number of parameters, such as slicing thickness, drying methods and temperatures are optimized, to achieve water and functional compounds (essential...
Proceedings Article

Image Processing Application on Automatic Fruit Detection for Agriculture Industry

Tresna Dewi, Rusdianasari Rusdianasari, RD Kusumanto, Siproni Siproni
The robot brings automation to every sector of human life, including agriculture. Automation in agriculture might be the solution to get a higher quality harvest and less dependency on human farming. The most suitable type of robot for harvesting is an arm robot manipulator. The harvesting robot needs...
Proceedings Article

Classification of Recyclable Plastic Waste by Near-Infrared Spectrometer

Md. Emran Hossain Emon, Quazi Hamidul Bari, Jobaer Ahmed Saju, Md. Rafizul Islam, Abhishek Sarkar
This study addresses the pressing issue of plastic waste management in Khulna City, Bangladesh, highlighting its direct impact on health and the environment. The conventional methods of sorting plastic waste in the existing Recycling Shops (RSs) in Khulna City are time-consuming and rely on visual inspection....
Proceedings Article

Theoretical and Experimental Investigation of Voltage Current Characteristic, Losses and Self-discharge of a Vanadium Redox Flow Battery System

Richard Beyer, Thilo Bocklisch
The paper describes results of the theoretical and experimental investigation and the modeling of a 5 kW and 15 kWh vanadium redox flow battery system (VRFBS). The first part of the paper presents the dependence of the voltage-current characteristics on state of charge (SOC), temperature, and electrolyte...
Proceedings Article

Magnetic Structure Design for Frictionless Proportional Solenoid Valve Based on Large Leaky Magnetic Circuit

Xu-dong Wang, Shuiming Tan, Zhen Zhang, Liang Zhang, Chen-guang Gao, Huanchun Wang
In the spacecraft micro propulsion system, the proportional solenoid valve of milligram flow is a very important component, which is used to achieve the system pressure and flow proportional adjustment. It is required to reach the high precision and high resolution control of thruster thrust. This paper...
Proceedings Article

The Rise of Domestic Theme Parks in China Compared with Overseas Markets Based on Investigation and Data Analysis

Ziyi Ma, Jiahe Sun, Yijin Xu, Zishan Zou
With the rapid growth of China’s economy and average consumption level, residents’ demand for entertainment and culture other than daily expenses has significantly increased. As a major part of the entertainment market, the theme park industry in China has also been experiencing huge and fast expansion....
Proceedings Article

Application and Explanation of General Geometrical Tolerances According to ISO 22081

Karel Petr
This article is based on new general geometrical tolerances and general size tolerances according to ISO 22081 from year 2021 used in ISO GPS standards. This standard canceled and replaced ISO 2768-2 from year 1989. The main changes are rules for application of general geometrical specification and general...
Proceedings Article

Temperature analysis of concrete gravity dam of Qianming Reservoir in China during construction

Shenghui Chen, Leilei Xue, Xiaochen Xu
In order to study the temperature process of concrete gravity dam in Qianming Reservoir during construction, temporary temperature monitoring was carried out. The reliability of the temperature monitoring data obtained by the dam permanent temperature monitoring system, such as the temperature during...
Proceedings Article

Comprehensive Comparison of Different Models for Large-Scale Thermal Energy Storage

Fabian Ochs, Abdulrahman Dahash, Alice Tosatto, Michael Reisenbichler, Keith O’Donovan, Geoffroy Gauthier, Christian Kok Skov, Thomas Schmidt
Large-scale thermal energy storages (TES) are advantageous to bridge the seasonal gap between heat demand and availability of renewables. However, the high investment costs associated with large-scale TES is still seen as a major barrier. Among others, challenges are space availability and the presence...
Proceedings Article

Effect of Temperature on Biofuels Production With Catalytic Cracking Process

KA Ridwan, M Anerasari, Taufik Jauhari, Ida Febriana
Biofuel is an alternative fuel that can be produced with organic resources such as vegetable oil and animal fat. One of the items that can be converted into biofuels is waste cooking oil. Waste cooking oil has a long hydrocarbon chain that allows it to be cracked. Biofuels are produced by catalytic cracking...
Proceedings Article

Study on Time Series Forecasting Algorithm of Power Users’ Electricity Charges Based on Support Vector Machine

Sha Liu, Rui Guo, Xianying Mu
When forecasting the electricity charges of power users, the accuracy of the forecast results is low because of the correlation between the actual electricity consumption time series. Therefore, the research on the time series forecasting algorithm of power users’ electricity charges based on support...
Proceedings Article

Sensitivity Analysis of Parameters in Simulating the Amplification Effect of Long Period Ground Motion in Basins

Wuping Gao, Yanxiang Yu
In the numerical simulation of the amplification effect of long-term seismic motion in basins, changes in basin parameters often have a relatively significant impact on the simulation results. Based on a simplified model of buried basin structure in North China, this paper conducted a sensitivity analysis...
Proceedings Article

A Comparison of Naïve Bayes and Bayesian Network on The Classification of Hijaiyah Pronunciation with Punctuation Letters

Adiwijaya Adiwijaya, Annisa Riyani, Mohamad Syahrul Mubarok
Arabic is a unique language because it really concerns in makhraj (the way of sound is made) that differentiate letters and words. The difference in pronouncing letters and words make the meaning of those words different, because pronunciation in Qur’an letters really concern in harakat (the length of...
Proceedings Article

Maximum Power Extraction and Pitch Angle Control for Offshore Wind Turbine with Open-Loop Hydraulic Transmission

Fan YaJun, Mu AnLe
This paper aims to extract optimal power from a hydraulic floating wind turbine using torque control and pitch control. When wind speed is below rated value, a nonlinear fuzzy controller is designed to capture maximum wind energy through regulating the displacement of hydraulic pump fixed in nacelle....
Proceedings Article

The Impact of Enterprise Digital Transformation on Industrial Linkages: A Case Study of Listed Companies

RongQian Chen
The digital economy, as an emerging economic form after agriculture and industrial economy, is playing an increasingly important role in social development. Its goal is to achieve industrial automation, which is an important step in the digital power strategy. Based on this, this paper studies the impact...
Proceedings Article

Performance Study of Sulfate-Resistant Admixtures on Different Brands of Cement

Yangjie Wang
This paper primarily explores the fundamental properties of cement and its resistance to sulfate attack, focusing on the effects of incorporating a sulfate resistance agent on the basic properties of different cement brands. Additionally, it investigates the alterations in sulfate attack resistance induced...
Proceedings Article

Experimental Study on the Failure Modes of Reinforced Loess Slopes with Frame Pre-stressed Anchors under Rainfall Influence

Yanpeng Zhu, Ao Wang, Anping Huang, Linping Wu, Dong Cheng
The stability of loess slopes reinforced with frame pre-stressed anchors is often compromised under the influence of rainfall, yet the destabilization modes and triggering factors remain unclear. To address this issue, indoor model experiments were conducted under simulated rainfall conditions, monitoring...
Proceedings Article

Developing and Stabilizing Salt-Hydrate Composites as Thermal Storage Materials

Gayaneh Issayan, Bernhard Zettl, Walter Somitsch
The success of thermochemical storage technologies is currently defined by sorptive materials. High adsorption heat and kinetics are material properties, which should correspond to application demands, such as utilizable temperature range and cyclability. Following the example of zeolite production in...
Proceedings Article

Combined Development of Epidemic Prevention and Control with Port Facility Security at Cargo Terminal

Weiwei Sun, Xiaoshu Shao
The cargo terminal opened to the international trade has the characteristics of direct contact with ships sailing on international routes, 24-h uninterrupted production, and high mobility of personnel, which has become an extremely important link in the prevention and control of the COVID-19 epidemic....
Proceedings Article

The miscible behaviors and mechanism of crude oil and mixing gas of CO2/N2 (CO2/H2S): a molecular dynamic simulation study

Haonan Li, Qingzhong Xue
Considering the low cost and no corrosion of N2 and the inevitability of H2S generation, CO2/N2 or CO2/H2S injection is seen as a promising approach for enhanced oil recovery. The miscible behaviors of gas mixture and crude oil are studied by molecular dynamic simulations. The results indicate that H2S...
Proceedings Article

Seismic stability analysis of folded utility tunnel in loess stratum

Zongyuan Ma, Lei Liu
The finite element and time history analysis method was used to study the dynamic response of a single cabin and folded utility tunnel under seismic conditions, considering the effects of seismic intensity and peak acceleration. The dynamic response characteristics of the utility tunnel assembly connection,...
Proceedings Article

Design of Hydraulic Quick Coupling Using DFA Lucas

Marek Šikola, Petr Lepšík
The paper deals with the design of the hydraulic quick coupling, which is based on specified parameters of international standard ISO 16028. The goal was to simplify the assembly of the quick coupling using innovative methods. Design for Assembly is a method used for reducing the complexity of the assembly,...
Proceedings Article

Electromyography Based Prosthetic Hand

Murk Rehman, Sarfraz Shahani, Sarmad Shams, Misbah Ali, Rubab Ashraf, Ahsan Ali
People who are adjusting to life without hands encounter a range of challenges. Losing hands can occur due to several causes, such as trauma, illness, congenital defects, or damage. This paper presents the development of an innovative electromyography (EMG) based prosthetic hand, designed to restore...
Proceedings Article

Do Major Customers and Suppliers Affect Green Innovation? Empirical Evidence from China

Zhiqi Zheng, Ruixu Tian
In recent years, both enterprises and academia have focused their attention on green innovation, but few studies have explored at the conditions and mechanisms that explain the relationship between major customers (suppliers) and green innovation. Based on the research perspective of supply chain management,...
Proceedings Article

Research and Application of Information Security Offense and Defense Exercise in Electric Power Industry

Mingxuan Li, Zhushi Yang, Ling He, YangXin Teng
The smart grid is a new type of grid integrating traditional grid and information technology. With the rapid development of information technology, information security as a requisite part of information technology is profoundly affecting people's work and life. While the development of science and technology...
Proceedings Article

Add Water and Get Problems, to Solve: Geotechnical Problems with Steep Rock Faces in Soft Sandstone and Limestone Varieties, Including the Effects of Water

Ulf Köhler, J. Engelhardt
For stabilisation works of steep rock faces, which are often created as cuttings for roads, the latent processes of weathering (such as frost, gravity and water…), must be considered, in addition to fracturing and stratification, to a greater extent for “soft” rocks than in the case of hard rocks. ...
Proceedings Article

Effect of Bentonite on the Yield and Composition of Products From Thermolysis of Polystyrene Waste

Lety Trisnaliani, Aida Syarif, Sahrul Effendy, Tahdid, Rima Daniar
Economic growth and population explosion are chronic problems in big cities which trigger an increase in energy consumption in society. The flow of plastic used has been a dilemma for a long time, so there are thoughts on how to turn plastic waste into something that can be useful. One of the polystyrene...
Proceedings Article

The Application of the Box-Jenkins (BJ) Method for Process Identification of the Batch Milk Cooling System

Rudy Agustriyanto, P. Setyopratomo, E. Srihari Mochni
The Box-Jenkins (BJ) method is a well-known system identification method that has been applied in several fields. Engineers use the Box-Jenkins method for quality control and process optimization in manufacturing. It can identify patterns and trends in production data, leading to improvements in product...
Proceedings Article

Quintic B-spline method for solving Lane-Emden problem

Ulziibayar Vandandoo, Zhanlav Tugal, Mijiddorj Renchin-Ochir, Otgondorj Khuder
This study introduces an efficient and highly accurate quintic B-spline method for solving Lane-Emden type equations which represent many scientific phenomena in astrophysics and mathematical physics. The main advantage of the obtained quintic spline is that it approximates not only a solution of the...
Proceedings Article

Prediction method of slope construction monitoring indicators based on LMD-SSA-BP

Yanru Jin, Pingjie Li, Mingjie Chen
During the construction process of slope engineering, it is greatly affected by the environment and has many safety risks and hidden dangers. By monitoring data and predicting values based on historical monitoring data, dynamic real-time monitoring of ship lock engineering is carried out to determine...
Proceedings Article

The Challenge of Planning and Constructing Large-Scale Hot Water TES for District Heating System: A Techno-Economic Analysis

Alice Tosatto, Fabian Ochs, Abdulrahman Dahash, Christoph Muser
In an international context (e.g. Germany, Denmark), the integration of long-term thermal energy storage (TES) into block heating systems already exists. Yet, the so-called pit TES cannot be easily applied to central European district heating (DH) systems because of the varying heat demand, temperature...
Proceedings Article

Participating in the control reserve market with PV battery energy storage systems and power-to-heat application

Georg Angenendt, Sebastian Zurmühlen, Dirk Uwe Sauer
One way to enhance the penetration of renewable energies in residential homes is to use renewables in the heating sector. Integrated homes combine PV battery storage systems with heat pumps to use PV-generated energy for heating. During winter, storage systems and especially batteries in an integrated...
Proceedings Article

Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement

Daniela Tarnita, Dragos Popa, Cristian Boborelu, Mirela Cherciu, Corina Cernaianu, Laura Grigorie, Alina Romanescu, Danut-Nicolae Tarnita
The present paper aims to study the virtual behavior of a prosthetic elbow joint. The values and distribution of stresses in the prosthetic elbow joint by using FEA on the 3D virtual model during flexion-extension movement under the solicitation of a vertical external force are obtained. They are compared...
Proceedings Article

Model Tree with Modified L1 Loss Function for Predicting Missing Attendance Data of Faculties

Mohammad Arif Rasyidi, Rachmadita Andreswari
The problem of missing attendance data in our university often arises due to the negligence of faculties. In this study, we address the problem by directly predicting the work duration of faculties. The nature of the problem require us to not only make accurate predictions, but also minimize the rate...
Proceedings Article

Impact of Lapindo Hot Mud Flowing on Macrozoobenthos Communities in Estuary Porong, East Java

Tarzan Purnomo, Fida Rachmadiarti, Soegiyanto Soegiyanto
Estuary Porong is part of the east coast of Sidoarjo, East Java, which receives the Lapindo mudflow. Lapindo mudflow into the sea through the Porong river has caused sedimentation and changed the Porong river base substrate morphology so that it affects the organism that live in the estuary, especially...
Proceedings Article

The Concept and Design of Solar Powered Sprinkler System Based on IOT Monitoring

Tresna Dewi, Rusdianasari Rusdianasari, Ahmad Taqwa, Teddy Wijaya
South Sumatra has an abundant solar energy source waiting to be optimally optimized. This potential is promising in all the economic sectors, such as agriculture. Solar energy application is one of digital farming implementation for agriculture and is expected to ease the farmers’ workload. This paper...
Proceedings Article

Producing Liquid Smoke Results from Pyrolysis of Waste Acacia (Acacia Mangum Wild) and Teak Wood (Tectona Grandis) into Organic Pesticides

K. A. Ridwan, Ida Febriana, M. Anerasari, Andiko Andiko, Ajeng Mawarni Putri
Many problems occur in agricultural products, one of which is the presence of residual chemicals that are still contained in plants so that they can endanger the health of humans who consume them continuously. One of the efforts to minimize the use of this dangerous insecticide, the researchers designed...
Proceedings Article

Preparation and performance test of multiblock polycarboxylate superplasticizer with low sensitivity

Wenhong Chen, Lei Deng, Yu Jiang, Bo Zhang
In order to solve the problems such as wide fluctuation of concrete fluidity, too fast loss and water secretion caused by the variation of polycarboxylate superplasticizer for concrete preparation. In this paper, a kind of polycarboxylate superplasticizer with multiblock low sensitive(PE-K) was prepared...
Proceedings Article

Research on Rapid Measurement of Methanol in Immobilized Lipase Synthesis of Biodiesel Based on Near Infrared Technology

Ji Li, Jian Xing, Guohua Chen, Senshen Yu
Aiming at the measurement of methanol content during the synthesis of methyl oleate from methanol and oleic acid with immobilized lipase in solvent-free and non aqueous media, a rapid measurement method of "centrifugation-near infrared(NIR) transmission" was proposed and a portable NIR transmission measurement...
Proceedings Article

Material Removal Rate and Surface Roughness of SiC/Al Matrix Composites Machined by Wire Electrical Discharge Machining: Experimental Method

Qi Lijun, Ma Baoji
In the present study, the experiments have been made to investigate the effect of wire electrical discharge machining (WEDM) parameters such as pulse duration, pulse off time, discharge current , working voltage on the material removal rate and the surface roughness (Ra) during WEDM of particulate silicon...
Proceedings Article

Probabilistic Assessment of Reinforced Soil Walls Using Fourth Moment Normal Transformation

Ekansh Agarwal, Anindya Pain, Annan Zhou
Fourth Moment Normal Transformation (FMNT) is an efficient method to probabilistically scrutinize the stability of reinforced soil walls (RSW). The methodology doesn’t require the assumption of the distribution of involved random variables to estimate the probability of failure (Pf) and subsequently...
Proceedings Article

Optimisation of a Theoretical District Heating System with Seasonal Thermal Energy Storage

Miguel Angel Pans Castillo, Philip Eames
A novel model was used to simulate how an existing district heating (DH) network for Holywell Park, Loughborough University (Loughborough, UK) could be transitioned to low/zero carbon heat. A simulation which includes heat pumps (HPs) and evacuated-tube solar thermal collectors (ETSTCs) to both provide...
Proceedings Article

Innovated Testing Equipment and the Influence of Two-Axis Loading on Comfort of Car Seats

Petr Lepšík, Vítězslav Fliegel
The car seat comfort depends on many parameters of the seat and the characteristics of the people sitting on the seat. Each person is different, behaves differently and feels differently. The seat cannot suit everyone, or it must be required the car seat to adapt automatically to the person sitting on...
Proceedings Article

Application and research of digital twin technology in power grid enterprises

Jie Shen, Qiuying Shen, Dan Zhu, Min Li, Gang Wang, Sufu Li, Bo Yang, Haijun Yuan
With the diversified development of economy and society and the continuous progress of science and technology level, the innovation of marketing equipment field management method has become the inevitable trend of the development of electric power marketing in the new era. Intuitive and effective monitoring...
Proceedings Article

Research on inventory system of highway E&M equipment affected by the environment

Zhihe Cheng, Linxuan Liu, Xiaomin Dai
With the rapid development of China's highway construction and the gradual increase of toll road mileage, the importance of E&M equipment in highway construction has become increasingly prominent. However, in recent years, the special operation and maintenance cost of electromechanical equipment...
Proceedings Article

Interpretation of New Rules for Using of General Geometric and Dimensional Specifications in Drawings According to International Standard

Bronček Jozef, Drbúl Mário, Konstantová Viera, Daniel Čuchor
This paper presents the interpretation of new rules of general product specification (GPS) according to International Standard EN ISO 22081. Standard EN ISO 22081 sets out rules for the definition and interpretation of general geometric specifications and general dimensional specifications (Article 5.12...
Proceedings Article

Ocular Disease Detection Using state of the art Machine Learning techniques based Clinical Decision Support System for Ophthalmologist

Sarmad Shams, Mishkaat Jamil, Aqsa Faheem, Afnan Qureshi, Zona Khan, Natasha Mukhtiar
Machine learning is vital in enabling medical practitioners to detect diseases such as Ocular at an early stage. It is important to detect ocular disorder to overcome the eternal damage to eyes. Ophthalmic disorders are generally not fatal, but if progress over time, they can significantly affect the...
Proceedings Article

Experimental Study on the Performance of An MEA Alcoholamine Absorber for Flue Gas CO2 Capture

Chunguo An, Ronggui Shi, Jingquan Miao, Huige Qu, Bin Zhang
The chemical absorption method utilizing alcohol-amine solutions has found widespread application in flue gas CO2 capture and recovery in power plants. However, the performance of the absorbent and energy consumption are pivotal factors that have hindered its large-scale implementation in power plants....
Proceedings Article

Production of Bio-Pellet Briquettes From Coconut Shell Waste as Alternative Energy for Household Scale

Muhammad Yerizam, Muhammad Zaman, Taufiq Jauhari, Nur Yuli, Riwen Setiawan, Umaidella Affrilla
Biomass is a renewable energy material because it can be produced quickly however, biomass has the disadvantage of being burned directly because of its poor physical properties, such as low energy density, handling, storage and transportation problems. To improve the quality of biomass combustion, biomass...
Proceedings Article

Study on the Influencing Factors of Ultimate Bearing Capacity for Tx-joints

Junwu Xia, Jiahui Qian, Xinqiang Xia
Based on the construction of steel structures of Xuzhou Concert Hall, the research on the behavior of TX-joints under the combined action of axial force and bending moment was conducted. Finite element (FE) models were established to investigate the influence of the interaction between in-plane T-type...
Proceedings Article

Research of Highly Reliable Drive and Control Technology Based on APSOC

Lijuan Zhang, Shouhao Wang, Qian Song, Yan Li, Weiyi Hao
With the development of industrial field, the requirements of miniaturization, high integration, strong computing performance and high reliability are put forward for servo controlers. The traditional control platform has some problems, such as complex system and small promotion space. Therefore, the...
Proceedings Article

Web Application Design Using Single Page Application To Increase Website Performance on Rumantara

Ilham Farobi, Soni Fajar Surya Gumilang, Muhammad Azani Hasibuan
One of the travelers needs when going to some places is a place to stay for a while and put their things. More importantly, a place that fits their needs and budget. This matter makes most of the travelers difficult to find a place to stay because of most of them is hotels with unneeded amenities that...
Proceedings Article

Specific Oxygen Reaction through analysis of Malondialdehyde in the body of Methapire postuma

Widowati Budijastuti, Nur Ducha, Dyah Hariyani, Sunu Kuntjoro
The purpose of this study was to evaluate the specific oxygen reaction on the body of Methapire postuma worms found in Pb metal contaminated areas. This study uses exploration methods with selected samples in Bangkalan. The body of the worm was cut off on the spermateka, vesicles and prostate sections...
Proceedings Article

Interaction of Energy Storage Technologies and Synthetic Fuels in Long-Term Decarbonization Scenarios

Diana Böttger, Christoph Kost, Daniel Wrede, Benjamin Lux, Tobias Fleiter, Benjamin Pfluger, Judith Heilig, Norman Gerhardt, Michael Haendel
With the 2015 Paris Climate Agreement, the international community has reaffirmed its commitment to tackle anthropogenic climate change with the goal of limiting the global average temperature increase below 1.5 °C, but to a maximum of 2 °C above pre-industrial levels. Against this background, we examine...
Proceedings Article

Rapid Transit (BRT) Public Transport Service Corridor I: Alang Lebar to Dempo During the Covid 19 Pandemic in the City of Palembang

Herlinawati Herlinawati, Yusri Bermawi, Moch. Absor, A. Latif, Muhammad Dimas, Muhammad Arief M, Muhammad Geraeldy, Ibnusyah Alam
The Palembang city government has implemented Bus Rapid Transit (BRT) since 2010 until now, in order to carry out the replacement/renewal of the City Bus. The BRT in the city of Palembang called “BRT Trans Musi” consists of two business entities, namely BRT owned by BUMD SP2J (Palembang Jaya Development...
Proceedings Article

Study on earth pressure for limited soils between main body and auxiliary structure of subway station

Ruilong Yin, Fanglong Yuan, Donghui Zhao
In subway engineering construction, the soil between the subway station and the auxiliary structure is considered a confined space. Therefore, it is not appropriate to calculate by Ranking and Coulomb’s classical earth pressure theory. A theoretical calculation method for earth pressure on limited soils...
Proceedings Article

Research on Seepage Field of Fuzhou Metro Line 4 under The Guangminggang River Section Based on Numerical Simulation

Shaozhong Peng, Xiang Xiao, Jie Yuan, Yiheng Pan, Hongpu Xu
With the increase of economy, traffic congestion is becoming increasingly serious. Underground rail transit projects such as subways and underwater tunnels have been vigorously developed. The seepage field of the Guangminggang section of Fuzhou Metro Line 4 and ABAQUS software was selected for numerical...
Proceedings Article

Research on Independent Experimental Model of Circuit Theorem

Li Ya-ning
The circuit theorem in the circuit course is selected as the experimental content. The teacher puts forward the performance index requirements, the student self-learning experimental principle and the related instrument and meter use methods, and then independently designs the experimental instruments,...
Proceedings Article

Numerical Model of Lab-Scale Packed-Bed Thermal Energy Storage System

Burcu Koçak, Halime Ömür Paksoy
This paper presents numerical modeling of lab-scale packed bed thermal energy storage (TES) system. In the packed-bed with 0.30 m diameter and 0.90 m height, monotype storage particles developed from demolition wastes are used. Synthetic thermal oil is be used as fluid phase between 80 – 180°C. Schumann...
Proceedings Article

Design and Simulation Analysis of Flow Field in Turbine Blades ECM Process

Zhao Han, Fan Qingming
Turbine blades play an important role as important parts in aero engines. One of the main methods of machining is electrochemical machining (ECM). In this paper, based on the flow field theory of electrochemical machining, the flow field analysis of machining gap was taken as the main research content...
Proceedings Article

Research on the Management Reform Path of Textile Manufacturing Enterprises Based on Digital Marketing

Ruoan Ren, Yudian Zhang, Han Chen
With the implementation and development of China’s digital economy strategy, the integration of the real economy and the digital economy has become a national strategy. The traditional textile manufacturing enterprise has gradually become the main direction of enterprise reform in the form of digital...
Proceedings Article

Research on Pricing Strategy Based on Consumer Behavior

Huiyi Wu, Yunfu Huo
The rapid development of e-commerce has changed consumers’ consumption behaviour, the most significant of which is the change of channels. The traditional retail channels can choose online direct sales channels. In order to adapt to this change, enterprises adopt a dual channel sales model. This paper...
Proceedings Article

A New Stochastic Response Surface Method in Spatial Variability Slope Stability Analysis

Sina Javankhoshdel, Thomas Zeger, Brigid Cami, Helmut Wahanik, Terence Ma
Spatial variability is becoming more and more common in limit equilibrium slope stability analysis. With the recent advances in the abilities for limit equilibrium slope stability analysis to handle complicated models, it is more important than ever to have a fast and accurate method to perform slope...
Proceedings Article

Properties of woolen woven coated with melanin of yak hair

Batchimeg Ganbaatar, Oyunchuluun Lkhagvasuren, Dagvasuren Erdene, Batsuren Choijamts, Nadmid Gongor
The melanin of yak hair is a biomaterial with unique features and functions. We investigated the properties of woolen woven when coated with yak hair melanin. Natural melanin was extracted from yak hair by the method of acid hydrolysis. The woolen woven was coated with 5%-10% owt melanin, 0.8 g/l sodium...
Proceedings Article

The Morphological, Anatomical, And Physiological Characteristics of Elephantopus scaber As Explant Source For Tissue Culture

Yuliani Yuliani, Sari Kusuma Dewi, Fida Rachmadiarti
The purpose of this study was to describe morphological characteristic (leaf area, plant height, and leaf sheath), to describe anatomical characteristic (trichomes found in leaf sheath, veins, leaf blade and stem, to describe the physiological characteristic from phytochemical tests of secondary metabolites...
Proceedings Article

Performance and Kinetic Study of Xylan Hydrolysis by Free and Immobilized Trichoderma Xylanase

Lieke Riadi, Yuana Elly Agustin, Lu Ki Ong, Ferrent Auryn Hadiwijaya, Amelia Winoto, Edrea Adelia Gunawan, Jessica Tambatjong, Tjie Kok
Enzyme immobilization is essential for enhancing the stability and reusability of enzymes in various industrial processes. To improve its feasibility, efficient yet simple immobilization techniques were required to be explored with respect to enhance overall catalytic efficiency and/or operational performance....
Proceedings Article

A Personalized Three-Dimensional Model of a Patient Using CT Images

Dragos-Laurentiu Popa, Alina Duta, Gabriel Buciu, Daniela Tarnita, Daniela Vintila
In order to obtain a personalized three-dimensional model of a patient based on CT images, the InVesalius program was initially used, which performs the initial conversion of the analyzed tissues into a specific engineering file composed of the so-called “point cloud”. This “point cloud” was imported...
Proceedings Article

Pneumatic Suspension of the Forging Hammer

Radka Jírová, Lubomír Pešík
During the forging process, the significant impact forces from working parts of a power forging hammer appear. Usually, forging hammers are tightly connected to the ground or use standard suspension systems based on, e.g. wooden beams. Then the impact forces may be easily transmitted to the ground of...
Proceedings Article

Fully Automatic Lung Segmentation in Thoracic CT Images using K-means Thresholding

Muhammad Basit Khan, Furqan Shaukat, Muhammad Abdullah, Junaid Mir, Gulistan Raja
Lung segmentation can be considered as one of the most important steps in the Computer-Aided Diagnosis (CAD) system for lung cancer at its early stage. Accurate lung segmentation can significantly enhance the efficiency of the CAD system by removing unnecessary parts from the input image. It also helps...
Proceedings Article

Catalytic Pyrolysis of High Density Polyethylene (HDPE) and Polystyrene Plastic Waste Using Zeolite Catalyst to Produce Liquid Fuel

Zurohaina, Irawan Rusnadi, Fatria, Arizal Aswan, Rima Daniar
This study aims to examine catalytic pyrolysis with activated natural zeolites. A pyrolysis reactor with three levels of separator as a result of development was used to study the catalytic pyrolysis of plastic waste into liquid fuel at intervals of 200 - 400 oC and operating time of 30-90 minutes. As...
Proceedings Article

Assessing the Hydro-Morphological Change Due to the Confliction of Old Brahmaputra and Dasani rivers

Abdullah Al Imran, Md. Jahir Uddin
The old Brahmaputra, Dasani, Jinjiram, Alaikhal, and some other distributary channels of Jamuna flow through Jamalpur. Old Brahmaputra and Dasani rivers are hydro-morphologically dynamic, erodible, and meandering. There is a precedent of two rivers meeting in the Jamalpur district. In 2009 near Sherpur...
Proceedings Article

Automating Storage Arbitrage in German Electricity Market

Mariia Bilousova, Anton Motornenko, Fabian Hofmann
This study examines the potential of energy arbitrage in the German electricity market as a way to increase the return on investment of battery storage technologies. The main goal is to develop and estimate the performance of automated arbitrage strategies for households using Tesla Powerwall energy...
Proceedings Article

Seismic Effect Analysis of High-Filled Cuter Cover Tunnel Considering the Time-dependent Nature of Fill Soil

Xuhong Shi, Sheng Li, Li Ma, Jiangong Zhang, Lei Cai, Xuefeng Ban
In order to investigate the seismic effect analysis of High-Filled Cuter Cover Tunnel based on equal load reduction rate and considering the timeliness of filling, three load-reducing materials, namely, EPS board, low-pressure solid soil and rubber granular improved soil, are selected, and the effects...
Proceedings Article

Comparison of seismic vulnerability analysis of steel-tube concrete arch bridges at different construction stages based on the probabilistic seismic demand analysis

Minhuan Liu, Qianhua Yu
In order to study the effects of earthquakes on the structure of large-span steel-tube concrete arch bridges under different construction states, a large-span steel-tube concrete arch bridge was selected as an actual construction case, and OpenSees was used to consider the internal forces during the...
Proceedings Article

Field test research on the long-term stability improvement of the base structure of the road storage yard in the port area

Deyong Wang, Jing Wang, Junlong Hu, Yao Xie
Relying on a road project in a certain port of Zhuhai, through field tests, the effect of the semi-rigid base rolling process on the degree of compaction, 7-day water immersion compressive strength and CBR was researched; proposed a pavement structure layer with geogrid and sand cushion added to the...
Proceedings Article

Research on Development of Cloud Computing Based on Patent Analysis

Junfeng Yu, Yanqing Zhao, Shiwei Zhu, Beibei Xu, Sisi Li, Mingjun Zhang
The application patents of cloud computing as data sources are studied in the paper. We mainly use statistical analysis method and social network analysis method and high-level patent analysis was carried out in many aspects, such as main national distribution, main institutions, focal research points...
Proceedings Article

Study on mechanical properties of rear fulcrum hanging basket of cable-stayed bridge

Liuhao Li, Ningbo Nie
In order to study the mechanical properties of diamond hanging basket in the construction process, this paper takes the diamond hanging basket used in the construction of Jialing River Bridge in Baiyanba as the engineering background, and uses Midas / Civil finite element software to establish the hanging...
Proceedings Article

Web-Based Food Delivery Management System

Soni Fajar Surya Gumilang, Nia Ambarsari, Mei Dina Isti Nurmala
The process of ordering a meal in an organization still using a conventional system or in other words, the civitas organization must come to the cafeteria to order the desired menu. The conventional system uses paper for order recording process. So the problem happens repetitively, such as redundancy...
Proceedings Article

Temperature distribution in a new composite material for hydrogen storage – Design study of different cooling concepts

Lars Baetcke, Martin Kaltschmitt
A newly developed composite material has been explored based on metal hydrides in combination with polymers enriched with highly porous carbon. As metal hydride, a RHC (reactive hydride composite) was chosen (e.g., MgH2 + 2 LiBH4). The hydride is infiltrated into the pores of the porous carbon suppressing...
Proceedings Article

Optimizing Data Center Waste Heat Reuse: Case Studies and Environmental Implications

Xiaoshu Lü, Tao Lu, Qunli Zhang
As data centers (DCs) are the backbones of information and communications technology (ICT), internet and big data, the utilization of energy by DCs has increased exponentially, which presents a significant impact on the environment. To simultaneously solve the dilemma of DC huge amount of electricity...
Proceedings Article

The Effect of Quenching Media on the Hardness of AISI 1045 Steel

Mulyadi Mulyadi, Dodi Tafrant, Hendradinata Hendradinata, Zainuddin Zainuddin
Steels, as one of the main components of construction requires great strength. Steel can be modified its strength by adjusting the percentage of the amount of its constituent substance composition. Some substances that can be used as a composition in steel include: Iron (Fe), Carbon (C), Phosphorus (P),...
Proceedings Article

Overview on Abrasive Belt Grinding for Complex Surface

Deng Ruixiang, Qiao Hu, An Jiaxiang, He Jiang
Abrasive belt grinding technology is an important part of the precision forming process of complex profile parts. Based on the planning of grinding path, contact model and material removal model, the research and application progress of abrasive belt grinding technology at home and abroad are summarized,...
Proceedings Article

Harnessing Value From Circular Economy

Kirsikka Kiviranta, Tomi Thomasson, Jonne Hirvonen, Matti Tähtinen
Energy systems with high shares of variable renewable power generation have an increased need for power system flexibility. In parallel, renewable energy has an important role in circular economy as circular activities such as material processing consumes power and heat. This paper examines if harnessing...
Proceedings Article

Study on Loosening Load Law and Performance of Double Nut of Transmission Tower

Fengkai Ge, Qinghua Li, Maohua Li, Xinquan Wang
Based on the bolt connection characteristics of transmission tower, this paper studies the loosening mechanism and causes of double nuts of transmission lines. The finite element simulation analysis of bolt connection is carried out by using ABAQUS software. The influence of initial pretightening force...
Proceedings Article

Comparison of PMSM and BLDC Applications in Servo System

Qiangqiang Lin, Qijia Zheng, Shiliang Miao, Yan Li, RuiJing Zhao
Servo control requires fast following performance and high steady-state accuracy in position follow-up mode. Servo of special environment application has more strict requirements for motor performance and reliability. The development of servo system has experienced the initial electro-hydraulic servo,...
Proceedings Article

Research and Practice on Distributed Decentralized Medical Document Storage System

Liang Bing-jin, Tu Rui-wei, Lin Yan-jun
In response to the security and stability issues of medical documents in large hospitals, this article designs a distributed decentralized medical document storage system based on IPFS to solve the problems of network congestion, vulnerability to virus attacks, poor security and confidentiality, and...
Proceedings Article

Vibration Analysis of Multifunctional Laminated Glass Composite Panel

Reza Moezzi, Jindrich Cyrus, Jan Koci
This paper aims to investigate on laminated glass composite panel (LGCP) including at least one viscoelastic interlayer which can resolve several design problems. LGCP can be offered to increase strength stiffness characteristics of the panel or sound damping proficiencies. In this study, first the laminated...