Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

Design and Simulation Analysis of Flow Field in Turbine Blades ECM Process

Authors
Zhao Han, Fan Qingming
Corresponding Author
Zhao Han
Available Online November 2019.
DOI
10.2991/pntim-19.2019.13How to use a DOI?
Keywords
Electrochemical Machining(ECM); Turbine Blade; Flow Field; Simulation
Abstract

Turbine blades play an important role as important parts in aero engines. One of the main methods of machining is electrochemical machining (ECM). In this paper, based on the flow field theory of electrochemical machining, the flow field analysis of machining gap was taken as the main research content When machining turbine blades. And the gap flow field model of blade electrochemical machining was established. Then based on COMSOL Multiphysics software, the distribution and characteristics of flow field were studied by numerical simulation of machining gap. Finally, the effects of different machining gaps and electrolyte pressure on turbine blade machining were analyzed, and the effects of electrolyte velocity and pressure on distribution were summarized.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
10.2991/pntim-19.2019.13
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.13How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhao Han
AU  - Fan Qingming
PY  - 2019/11
DA  - 2019/11
TI  - Design and Simulation Analysis of Flow Field in Turbine Blades ECM Process
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 60
EP  - 65
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.13
DO  - 10.2991/pntim-19.2019.13
ID  - Han2019/11
ER  -