Atlantis Highlights in Engineering

+ Advanced search
1581 articles
Proceedings Article

Modeling of Infiltration Wells to Reduce Rainwater Runoff of Buildings: A Case Study in Campus of Polytechnic State of Sriwijaya, Indonesia

Radius Pranoto, Anggi Nidya S, Ricky RA, Djaka Suhirkam, Viktor Suryan
Rainfall in Indonesia is classified as high, indicated by the average which ranges from 2000-4000 mm/year. This potential, on the other hand, often creates problems as a result of rain falling to the surface which usually only becomes surface runoff, inundation, and flooding. Infiltration wells are rainwater...
Proceedings Article

Design of Large-scale Platform Detection System Based on Distributed Wireless Communication Technology

Peng Li, Dengpei Ji, Hao Liu, Wenli Xu
Aiming at the problem that the traditional detection device can not avoid obstacles and easily collides with the equipment on the platform during the detection of the large-scale ultra-flat support platform, a detection scheme of large-scale ultra-flat support platform based on distributed wireless communication...
Proceedings Article

DESIGN OF DECISION SUPPORT SYSTEM APPLICATION FOR DETERMINING SCHOLARSHIP GRANTEE USING ANALYTICAL HIERARCHY PROCESS AND FACTOR RATING

Afrin Fauzya Rizana, Rayinda Pramuditya Soesanto
Scholarship refers to a program provided by organization that is given to students to relieve the tuition fee. There are several criteria and requirements that have to be fulfilled to get the scholarship. In practice, all the requirements will be checked manually for each applicant to determine who deserves...
Proceedings Article

Design and Research of High Speed Unbalance Undetection Device for Tiny Impeller

Zhang Xiaofen,, Bai Yu
A dynamic balance detection device with high transmission efficiency and expand-ability and a replaceable chuck step shaft as the rotating shaft is designed. It can be applied to the high-speed unbalance detection of micro impellers, which can eliminate transmission errors and prevent rotor turbulence....
Proceedings Article

Techno-economic Evaluation Of A Modular Compressed Air Energy Storage To Support Integration Of Wind Generation On El Hierro

Eva Schischke, Annedore Kanngießer, Markus Hadam, Marcus Budt
In order to reduce the dependence on fuel imports as well as CO2-emissions, islands are switching from diesel to renewable generation. Energy storage systems are used to avoid curtailment of the renewable generation as well as to reduce cycling of the diesel generator. This paper evaluates the operation...
Proceedings Article

Decision Support System: A Prototype for Determining Rice Price Based on Its Quality Measurement

Rizka Hadiwiyanti, Prisa Marga Kusumantara, Dedi Anugrah, Tri Lathif MS
Quality measurement of rice is an important and necessary activity before it is sold to market. By distinguishing its quality, pricing will also be suitable by the physical characteristics of rice delivered by farmers. This paper proposed a prototype of DSS application to assist intermediaries in determining...
Proceedings Article

Load Forecasting in District Heating Systems Using Stacked Ensembles of Machine Learning Algorithms

Till Faber, Matthias Finkenrath
For district heating, heat demand forecasting is playing a key role for an optimised power plant dispatch. Machine Learning can help to significantly improve forecasts of thermal loads. The prediction quality of neural networks is higher than that of decision trees in most cases. However, compared to...
Proceedings Article

Characterization of Blending Composition Variations in Fatty Acid Methyl Ester (FAME) Biofuels With Diesel to Biodiesel

Yusabri, Muhammad Yerizam, Aida Syarif
The increase in national fuel consumption has an impact on the decline in fossil energy reserves. Therefore, one of the solutions to overcome this problem is to look for alternative fuels, such as biosolar or biodiesel. This biodiesel is environmentally friendly, has no effect on health, can be used...
Proceedings Article

Peer-Review Statements

Jun Yang, Anuranjan Misra, Bijay Kumar Kandel
All of the articles in this proceedings volume have been presented at the 3rd International Conference on Management Science and Engineering Management (ICMSEM 2022) during June 17–19, 2022 in Qingdao, China. These articles have been peer reviewed by the members of the [Scientific Committees and reviewers]...
Proceedings Article

Peer-Review Statements

Liang Yan, Jing Na
All of the articles in this proceedings volume have been presented at ICFPMCE 2022 during 22–25 July, 2022 in Kunming, Yunan Province, China. These articles have been peer reviewed by the members of Scientific Committee, Program Committee and other reviewers, and approved by the Editor-in-Chief, who...
Proceedings Article

Peer-Review Statements

Ziqiang Zeng, Vilas Gaikar, Reza Lotfi
All of the articles in this proceedings volume have been presented at the 2022 3rd International Conference on E-commerce and Internet Technology (ECIT 2022) during March 04–06, 2022 in Zhangjiajie, China. These articles have been peer reviewed by the members of the [Scientific Committees and reviewers]...
Proceedings Article

Peer-Review Statements

Sina Javankhoshdel, Yousef Abolfazlzadeh
Proceedings Article

Peer-Review Statements

Jaroslav Homišin, Michal Petrů, David Herák, Ladislav Ševčík
Proceedings Article

Peer-Review Statements

Ilie Dumitru, Lucian Matei, Laurentiu Daniel Racila, Adrian Sorin Rosca
Proceedings Article

Peer-Review Statements

Peter Schossig, Peter Droege, Antonia Riemer, Martin Speer
Proceedings Article

Peer-Review Statements

Zakiah Ahmad, Amit Srivastava, Sudharshan N. Raman
All of the articles in this proceedings volume have been presented at 2023 5th International Conference on Structural Seismic and Civil Engineering Research (ICSSCER 2023) during August 25-27, 2023 in Nanjing, China. These articles have been peer reviewed by the members of the [Scientific Committees...
Proceedings Article

Peer-Review Statements

Bijay Kumar Kandel, Jun Yang, J. Jose Prabhu, Xueyuan Wang
All of the articles in this proceedings volume have been presented at 2023 8th International Conference on Engineering Management (ICEM 2023) during 8-10 September 2023 in Wuhan, China. These articles have been peer reviewed by the members of the [Scientific Committees and reviewers] and approved by...
Proceedings Article

Peer-Review Statements

Vilas Gaikar, Bijay Kumar Kandel, Hrushikesh Mallick
Proceedings Article

Peer-Review Statements

Nyayu Latifah Husni, Wahyu Caesarendra, Martha Aznury, Leni Novianti, Deris Stiawan
Proceedings Article

Peer-Review Statements

Gaofeng Zhao, Guoxiong Mei, Zengguang Xu, Fei Zhang
All of the articles in this proceedings volume have been presented at 2023 5th International Conference on Civil Architecture and Urban Engineering (ICCAUE 2023) during November 17-19, 2023 in Xiamen, China. These articles have been peer reviewed by the members of the [Scientific Committees and reviewers]...
Proceedings Article

Peer-Review Statements

Reginald E. Hammah, Sina Javankhoshdel, Thamer Yacoub, Alireza Azami, Alison McQuillan
Proceedings Article

Peer-Review Statements

Markus Hartono, Hudiyo Firmanto, Connie Susilawati
All of the articles in this proceedings volume have been presented at the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023) during 14-15 September 2023 in Yogyakarta, Indonesia, which was held in hybrid mode. These articles have been peer reviewed by the members...
Proceedings Article

Peer-Review Statements

Abdul Rauf, Norhayati Zakuan, Muhammad Tayyab Sohail, Ruzita Azmi
All of the articles in this proceedings volume have been presented at 3rd International Conference on Management Science and Software Engineering (ICMSSE 2023) during 21-23 July 2023 in Dali, China. These articles have been peer reviewed by the members of the [Scientific Committees and reviewers] and...
Proceedings Article

Peer-Review Statements

Ulziibayar Vandandoo, Ankhbayar Gelegbadam, Ayurzana Badarch, Batdemberel Ganbat, Battsetseg Gereltbyamba, Kita Naoyasu, Ilchgerel Dash, Munkhsaikhan Gonchigsuren, Narantsetseg Magsarjav, Tsedenbayar Dashdondog, Tsermaa Galya, Saran Galdansambuu
All of the articles in this proceedings volume have been presented at the 3rd International Conference on Applied Science and Engineering (ICASE2023) during June 16–17, 2023 in Ulaanbaatar, Mongolia. These articles have been peer reviewed by the members of the editors, international committee and approved...
Proceedings Article

Fault-Tolerant Control for Five-Phase Permanent Magnet Synchronous Motor Servo System Based on Topological Reconstruction

Jiwen Han, Hongzhou Song, Yinan Liu, Xiaqing Pei, Zaiping Zheng, Weiqi Liu
Motors are required to possess the capacity to deal with sudden failure in the occasion where reliability are highly required, such as aerospace, more-electric aircraft, all-electric ship propelling and new energy automobile. In other words, motors should keep working for some time instead of shutting...
Proceedings Article

Are Carnot Batteries an Alternative When Repurposing Coal Power Plants in Europe?

Vartan Ahrens Kayayan
As Europe transitions away from coal-fired power plants, there is indecision regarding the fate of the retiring sites. This paper tests the feasibility of an alternative to consider: Carnot Batteries. Refurbishing existing power plants has several advantages. Components can be put to a new purpose. The...
Proceedings Article

Validation of Factors Influencing Green Supply Chain Development Based on Analytic Hierarchy Process and Game Theory

Shengan Yu, Wenxu Li
Emissions reduction and green energy application have become a global issue. Although many successful green initiatives are witnessed, it is difficult to identify the key factors influencing these successes and hence hard to replicate them. In this paper, we validate the factors influencing green supply...
Proceedings Article

Research on Precision Marketing of Tourist Attractions Based on Big Data Technology: E-commerce Perspective

Zhouyin, Huang Mengdie, Wan Yuhang
Big data technology can record and analyze tourists’ personal travel preferences, consumption habits and other data to express individual differences, is an important supporting force for precision marketing of tourist attractions, and network precision marketing from the perspective of e-commerce is...
Proceedings Article

Analysis of typical coal tunnel anchor network support accident cases in Huainan mine area and study of preventive measures

Xiaohu Liu, Qun Zheng, Hua Cheng, Guofeng Yu, Yong Luo, Bo Ren, Diancai Xiao, Changrui Duan, Zheng Tong, Dechao Lu
The frequent occurrence of accidents in deep shaft engineering seriously restricts the safe and efficient mining of coal mines. In this paper, 193 cases of coal mine anchor network support accidents have occurred in Huainan mine since 2000, and the accidents are classified into roofing injury, roofing...
Proceedings Article

Research and Analysis of UAV Application Technology in Geological Engineering

Yingxin Cheng, Zhifeng Mao
In recent years, with the rapid development of society, the utilization rate of land and resources has been significantly improved. In order to achieve stable use and reduce loss, relevant personnel need to actively carry out planning and design, and gradually expand the scope of surveying and mapping....
Proceedings Article

Hierarchical Model of E-commerce Privacy Protection Based on PPI Model

Zihao Lin
With the rapid development of Internet technology, people pay more attention to the protection of personal privacy in the big data platform to avoid the risk of data leakage while enjoying the Internet. Companies used encrypt databases or traditional inefficient encryption algorithms to protect privacy...
Proceedings Article

Initial Study of Two-Blade Propeller Design Parameter

Irawan Malik, Sairul Effendi, Soegeng Witjahjo, Muhammad Taufik
All manufacturing processes begin with design steps of a product. This study aims to design the main parameters of two-blade propellers for fishing vessels using computer-aided design (CAD), Computer-Aided Engineering (CAE) and Computational Fluid Dynamic (CFD) software simulations. Through simulation,...
Proceedings Article

Applicability of Research on Single-Pile Composite Foundation Load Test for High-Rise Buildings

Liang Zhang, Tiehang Wang, Zaikun Zhao, Jiabin Ruan
Plain concrete pile composite foundations in loess areas predominantly rely on single-pile composite foundation load tests to determine bearing capacity. Despite high-rise buildings’ composite foundations meeting the design criteria for bearing capacity through load testing, they still exhibit considerable...
Proceedings Article

An Empirical Study on Work Autonomy and Sense of Work Meaning of New Generation Employees Based on JD-C Model

Jinming Jiang, Zhengdong Li
Based on the JD-C model, this study uses Stata and Mplus structural equation models to perform multi-factor fitting analysis of the sense of meaning of work, and tests its relationship with work autonomy through Bootstrap test and Sobel test. Studies have shown that work flexibility acts on the sense...
Proceedings Article

Prototype of Voice Commanded University Executive Business Intelligence Assistant (BELA)

Mohamad Irwan Afandi, Eka Dyar Wahyuni
Higher education institutions have already started implementing business intelligence application in order to support university executives to make better decisions. Normally, an application is operated using a mouse, keyboard, or touch-screen device which in some cases is not suitable for the users....
Proceedings Article

Novel Approach for Particle Size Distribution Analysis. Applied Case to Rockfills and Waste Dumps Using Unmanned Aerial Vehicle (UAV)

Marco Arrieta
This paper describes the workflow and results for Particle Size Distribution (PSD) analysis using UAV photogrammetry for waste rockfill materials. A methodology for digital detection and statistical measurement of PSD derived from UAV-SfM photogrammetry is presented. The comparative results between field...
Proceedings Article

Innovation of Car Seat Measurement Device

Vitezslav Fliegel, Petr Lepsik, Rudolf Martonka
The car seat is tested in the conditions of real car operation, ie under the conditions of multi-axis loading. We will examine all the possible parameters and maybe find some objective conclusions for the car seat design. The content of this article is the innovation of car seat measurement device in...
Proceedings Article

Ellipse’s Versiera – Structure and Kinematics of the Generator Mechanism

Alina Duta, Iulian Popescu, Ludmila Sass, Mirela Cherciu, Ionut-Daniel Geonea
The structural and kinematic analyses of a mechanism presented in the specialty literature are performed. The mechanism is used to plot versiera of ellipses and ellipses. We wrote the equations for calculating the positions of the points necessary to realize the geometric model in the ADAMS® program...
Proceedings Article

Assessment of Pillar and Interburden Stability in Ultra-Close Multiple-Seam Mining Using Finite Element Modeling

S. E. Phillipson
Our primary evaluation tool for coal pillar designs is the Analysis of Coal Pillar Stability (ACPS) program, which is based on an empirical database of case histories. We apply the Rocscience RS2 two-dimensional finite-element modeling program to ultra-close multiple-seam scenarios to enhance existing...
Proceedings Article

The Hilbert–Mumford criterion for representations of network quivers

Marco A. Armenta, Alexander H. W. Schmitt
We give an alternative proof of the characterization of the semistable and the stable framed representations of a network quiver. This is a basic result for understanding the moduli spaces of neural networks which have been recently introduced.
Proceedings Article

DESIGN OF GEOGRAPHIC-BASED DECISION SUPPORT SYSTEM FOR ROAD REPAIRMENT WITH GDSS METHOD: CASE STUDY IN BANDUNG DISTRICT

Dicky Faisal Dramar, Farid Wira Darmawan, Audira Zuraida, Rayinda Pramuditya Soesanto, Ika Arum Puspita
In an effort to make road improvements effective and efficient in Bandung Regency, the Public Works Service performed road repairs based on the most damaged areas. In the implementation there is a problem of limited information possessed by the Office of Public Works Bandung Regency so that road improvements...
Proceedings Article

Use of Pressurized Oxidation of Cu2O as a Means of Improving the Performance of Redox Based Thermochemical Energy Storage Systems

Sike Wu, Cheng Zhou, Behdad Moghtaderi
CuO/Cu2O is a promising redox pair for thermochemical energy storage. This is primarily because of its suitable reaction temperature, high reaction enthalpy, high oxygen-carrying capacity, wide availability, and competitive cost. In this study, the influence of pressurized oxidation on a pure CuO/Cu2O-based...
Proceedings Article

Research of Hydrogen Concentration Measurement in Containment Vessel of Nuclear Power Plant

Jiang Fu, Shengzhi Liu, Weiwei Pan, Xiqing Hu
The integrating sphere gas chamber is selected as the core of the detection system, and a new algorithm is used to calculate hydrogen gas concentration. LED light source is selected as the detection system light source, and LED source wavelength is processed by fiber grating and piezoelectric ceramic,...
Proceedings Article

Research on Minimum Length Calculation of Skid-Mounted Small-Diameter Pipe Weight Bar

Xue Jijun
The drainage gas recovery operation with small-diameter continuous pipes is applicable to the one in natural gas well with low pressure, low production and low water content. Its advantages exhibit as the following: 1) high efficiency on continuous running of pipe string under pressure; 2) production...
Proceedings Article

Warehouse Safety in Order Picking

Donna Kharisma, Markus Hartono
Safety in warehouse becomes one of the important factors in manual order picking process. Workplace accidents can be caused by a variety of things, including the use of incorrect tools, a lack of work processes, inadequate equipment and safety equipment, and pickers' negligence. Picker safety must...
Proceedings Article

Processing Plastic Waste HDPE and PP on Pyrolysis Temperature Using Cu-Al2O3 Catalyst Into an Alternative Liquid Fuel

Pamilia Coniwanti, Fitri Hadiah, David Bahrin, Liza Novriani, Gracia Mei Lie Justina, Robinsyah
The crisis of energy reserves in Indonesia, especially in petroleum and high plastic waste usage, causes a very worrying problem in Indonesia. One way to overcome this problem is to process plastic waste into alternative liquid fuels. This study aims to determine the effect of temperature and the effect...
Proceedings Article

Flexural Strength of Self-Compacting Concrete Beams

Amiruddin Amiruddin, Ibrahim Ibrahim, Ika Sulianti, Agus Subrianto, Muhamad Ramadhan, Tiara Novia Khuljanna
Concrete precast technology has been developing and already used for many building structures. The components that have thin dimensions sometimes have problems in casting like its flowing and compaction. Self-Compacting Concrete (SCC) does not need to vibrate to achieve full compaction and it can flow...
Proceedings Article

Unsupervised Image Segmentation Algorithm using Superpixel and Cosine Similarity

Wahyu S J Saputra, C Aji Putra, Yisti Vita Via
In computer vision, image segmentation is a process of dividing image to get several segments of image. Image segmentation aim to divide image into simple section that meaningful and easy to analyze. Image segmentation regularly use to locate boundary of object in image, so object in image can analyzed....
Proceedings Article

Design of Intelligent Monitoring System for Power Distribution Equipment Based on Cloud Edge Collaborative Computing

Xu Erbao, LI Yan, Yang Mingshun, Chen Xi
With the development of sensor technology, when facing the explosive growth of large power data, the existing data acquisition and monitoring system (SCADA) is increasingly inadequate in data processing ability and lack of intelligence. In this paper, a novel intelligent monitoring system for power distribution...
Proceedings Article

Analysis of Battery Storage Usage of Heuristic Energy Flow Controllers

Kathrin Kefer, Patrick Kefer, Markus Stöger, Bernd Hofer, Michael Affenzeller, Stephan Winkler
Due to the increasing usage of renewable energy sources like photovoltaic (PV) systems in the private sector and their fluctuations in production, energy management systems (EMS) are becoming more and more important. As such system use the produced energy as efficiently as possible, they also have an...
Proceedings Article

The analytical solution of water surface line of constant inhomogeneous flow with rectangular section

Chao-xuan Huang, Zhen-wei Shen, Wei-jie Gong, Huan-huan Li, Jun-jie Li
This paper aims at the complicated flow pattern of non-pressure spillway tunnel during operation. Based on the reconstruction project of Qingshan Reservoir spillway tunnel, this paper makes a mathematical derivation of the calculation and analysis of the constant gradient flow surface line of rectangular...
Proceedings Article

An empirical study on the distribution of Tibetan monosyllabic monomorphemic words based on corpus

Dongzhi Tsering, Kunyu Qi, Cairang Yun
As the most basic constituent unit of language, monomorphemic words are of great relevance to the fields of natural language processing, language ontology research, and language application. This paper takes Tibetan monomorphemic words as the research object and uses the Tibetan lexical annotation corpus...
Proceedings Article

THE PROPOSED OF VENDOR SELECTION IN GOODS PROCUREMENT USING FUZZY ANALYTICAL HIERARCHY PROCESS (FAHP) METHOD AT PT. PERTAMINA HULU ENERGI OFFSHORE NORTH WEST JAVA (PHE ONWJ)

Kristoforus Maximinus Krisnabayu Tandra Widyatama, Ika Arum Puspita, Mumu Natapriatna
Along with the change of strategic system in the government that changed the scheme of contracts for oil and gas product from Cost Recovery to Gross Split in the oil and gas company like Pertamina Hulu Energi Offshore North West Java (PHE ONWJ), the company is required to be more effective and efficient...
Proceedings Article

Common battery storage for an area with residential houses

Eberhard Waffenschmidt, Till Paulzen, Alexander Stankiewicz
In this publication the technical benefits of a mutual battery storage compared to a solution with three individual battery storages is investigated. This has been done in the context of the EU funded project “GrowSmarter” in collaboration with Rheinenergie in the living area Stegerwaldsiedlung in Cologne....
Proceedings Article

The Purification of Biogas with Monoethanolamine (MEA) Solution Based on Biogas Flow Rate

Yohandri Bow, Leila Kalsum, Abu Hasan, A. Husaini, Rusdianasari
Biomass is a plant material which is quite abundant in Indonesia. Utilization is also currently undergoing development. One of the uses for biomass is conversion to biogas. Biogas is a renewable energy source that can be used as a substitute for fossil energy. Biogas can be produced by utilizing organic...
Proceedings Article

The Effect of Shell as a Substitution of Coard Aggregate with Superplasticizer Additional on the Compression Strength of Concrete

Lina Flaviana Tilik, Bambang Hidayat Fuady, Suhadi Suhadi, Rosy Armaini, Fadhila Firdausa, Muhammad Rifqi Agusri, Puji Hartoyo
Concrete is a type of building structure material, both buildings, bridges, and roads. Concrete is a construction material obtained from mixing sand, gravel, or crushed stone, cement, and water. To improve the properties of concrete, several kinds of additives that have certain functions are added to...
Proceedings Article

Analysis of Hot Spots and Trends of Domestic Intelligent Construction Research Based on CiteSpace

Yajuan Feng, Ting Lan
To analyze the hotspots and trends of intelligent construction research in China, bibliometric methods and CiteSpace software were used to analyze and compare the number of Chinese literature releases, disciplinary distribution, institutional cooperation network, emergent keywords, and evolutionary trends,...
Proceedings Article

Research on the Construction and Application of Statistical Monitoring System Based on Internet Finance

Zhichen Xu, Zeyu Li, Tianze Chen
With the support of Internet technology, the Internet financial system has been continuously developed, and then gradually formed a development system, such as Internet third-party payment, P2P online lending, crowdfunding and many other representative Internet finance models. In the development process...
Proceedings Article

Experimental study on the compressive strength of unsaturated loess with different contents of grout material and water glass

Zaikun Zhao, Tiehang Wang, Liang Zhang, Jiabin Ruan, Siqin Lv, Yu Xing, Hongbo Yin
Unsaturated loess, classified as a distinctive soil type, possesses a compressible large-pore structure, and exhibits a rapid reduction in strength upon exposure to water. This characteristic imposes significant constraints on engineering constructions in loess regions. Introducing grouting materials...
Proceedings Article

Back Analysis of Narrow Vein Open Stope Stability and Verification Using Kinematic and Empirical Methods

David Saiang
High walls of open stopes in underground stoping mines can be considered to behave in a similar manner to open pit slopes if stability is largely controlled by geological structures. With this assumption the kinematic method of analyses can be used to assess the stability of the footwall, hangingwall,...
Proceedings Article

Study on global dynamics of a special symmetrically laid composite laminated rectangular plate

Wensai Ma, Dongxiao Li, Fanghao Liu, Shufeng Lv
The global bifurcation and chaotic dynamics of the symmetrically laid orthotropic composite rectangular laminated plate on four simply supported sides is investigated for the first time by means of making use of the generalized Melnikov method. By utilizing the coordinate transformation theory to obtain...
Proceedings Article

A New Fabric Defect Detection Model based on Summed-up Distance Matching Function and Gabor Filter Bank

Yihong Zhang, Xin Ruan, Shijie Pan, Lifeng Shi, Bao Zong
Focusing on the problem of low efficiency and high mistake rate for manual detection of fabric with periodic textures, a new fabric defect detection model based on summed-up distance matching function and optimal Gabor filter bank is proposed. Firstly, the frequency and scale parameters of the filter...
Proceedings Article

Numerical Investigation of Effects of Silt Particles with Different Mean Diameters on Cavitation Flow Evolution in the Nozzle

Xiangdong Han, Fangyan Yu
Effects of silt particles with various mean diameters on cavitation development in the nozzle were numerically investigated. The diameters were 0.0015 mm, 0.0035 mm, and 0.0055 mm, respectively. Results clearly indicated that vapor contents in silt particle-water cavitation flow were greater than that...
Proceedings Article

Customer Requirements Mining and Product Design Analysis Based on E-commerce Comment Data

Pei-yu Shi, Jun-he Yu
Accurate mining of customer requirements (CR) can better improve the design of e-commerce products, and the Kano model is an approach to quantify CR satisfaction. Yet related parameters are mainly obtained by questionnaires. This study preliminarily extracts CR from online comment data by keyword frequency...
Proceedings Article

Design of Low-Cost Three-Axis Actuation System

Ondrej Hadac, Petr Lepsik
Low-cost is an increasingly inflected theme in the mechanical engineering world. A cost reducing leads to the development of new solutions, that could not be used in non-commercional sector before. One of this solution is the free hardware programmable platform called Arduino. This platform is very popular...
Proceedings Article

Numerical Model for Underground Hydrogen Storage in Cased Boreholes

Antoine Bachand, Bernard Doyon, Robert Schulz, Ralph Rudd, Jasmin Raymond
The decrease in generation costs of renewable energy, combined with advances in electrolyser technologies, suggest that green hydrogen production may be a viable option in the ongoing energy transition. Yet, a green hydrogen economy requires not only production solutions but also storage options, which...
Proceedings Article

The Method of Constant Current - Constant Voltage (CC – CV) for SECA Electric Car Battery Charging with Fuzzy Logic Controller

Selamat Muslimin, Renny Maulidda, M. Nawawi, A. Rahman, P. Menyna Kurnia
Electric cars are a solution to overcome the depletion of fossil fuels and environmental impacts. An electric car is a type of electric vehicle that uses a battery as the primary energy source. In charging, the battery is prone to overcharging, so a charging system is needed to maintain battery performance...
Proceedings Article

Experimental Research on On-line Monitoring and Compensation Algorithm of 3D Printing Based on Machine Vision

Zeng Lianghua, Zou Xinfeng
With the coming of the era of intelligence, machine vision and machine learning has become a research hotspot in recent years[1]. As an advanced manufacturing technology at present, 3D printing has been maturely applied in aerospace, bio-medicine and other fields[2]. However, a defect such as extruder...
Proceedings Article

Optimization of Student Interest Selection Using Artificial Neural Network and Rete Network

M. Syahrul Munir, Eva Y Puspaningrum, Dimas Eko Wicaksono
The need for a prospective student to know the interest of the field of study at the college according to his intelligence becomes one of the complex problems. The selection of the right field of study makes the prospective students more enthusiastic to attend college and graduate on time. Therefore...
Proceedings Article

Development of Phase Change Materials Based on Mixtures of Salt Hydrates Through Theoretical Prediction and Experimental Investigation

Christoph Rathgeber, Henri Schmit, Stefan Hiebler, Peter Hoock
Latent heat storage using phase change materials (PCM) provides thermal energy storage systems with high storage capacities in small temperature ranges. Most of the PCM used in applications undergo a phase change from solid to liquid and vice versa storing heat in repeated melting and crystallization...
Proceedings Article

Analysis of Deformations of Gravel Columns in Tailings Dams Using the Finite Element Method and Constitutive Equations

Kely Lara, Roxana Mamani, Jorge Cárdenas
In this research, the analysis of the deformations of the gravel columns applied in the foundation of the dam’s regrowth of the centerline method is developed. The purpose is to guarantee its stability against the potential liquefaction phenomenon induced by a seismic event, construction and external...
Proceedings Article

Designing Smart Contracts on Insurance Claims to Support the Supply Chain Performance

Josephine Permata Sari, Joniarto Parung
Blockchain as a distributed ledger technology that can guarantee transparency and speed in real time is increasingly being used to increase supply chain performance directly or indirectly. Blockchain in the form of smart contracts in the insurance business will speed up insurance claims and increase...
Proceedings Article

Accelerate the Construction of Low-Carbon Smart Logistics System Under the Global Carbon Reduction Goal

Huiwen Gao, Xinbo Ni
At present, climate warming, the shortage of oil resources and the decline of air quality are prominent problems in the world. In order to better protect the environment, governments have vigorously advocated the realization of low-carbon and sustainable development. The main purpose of this paper is...
Proceedings Article

Studies on Agricultural Development Based on Optimized Combination Forecasting and Markov Model

Zhang Yuting
Taking Shunde District, China as an example, we analyze the development of agriculture using the optimal combination of the grey system forecasting model, linear regression model, and polynomial regression model. The results show that the optimized combination forecasting model has feasibility and practicability,...
Proceedings Article

Dynamic Optimization of the Controller for the Active Suspension System of a Race Car

Vlad Țoțu, Cătălin Alexandru
This work deals with the dynamic optimization of the control system for the active suspension system of a single-seater race car. The suspension mechanism in study is an innovative one, in its design starting from the requirement to eliminate the contradictory variations of some movement parameters in...
Proceedings Article

Continuous Feed Roller Grinder Design and Its Finite Element Analysis Based on Solid Works

Wan Hongqiang, Liu Zhihao, Han Quanli, Sun Zhengyang
After the workpiece is processed, the barrel mill is widely used as a burr removal device. Therefore, in order to improve the efficiency of burr removal and enhance the polishing effect on the surface of the workpiece, the conventional roller grinder is improved in design, and the continuous batch grinding...
Proceedings Article

Business Models and Grid Impact of Energy Storages and Controllable Loads for PV-Self-Consumption at Prosumer Level

Basem Idlbi, David Stakic, Matthias Casel, Dietmar Graeber, Gerd Heilscher, Martin Fiedler
Many countries are experiencing rapidly increasing distributed generation (DG) of renewable energy sources (RES). Electricity self-consumption is currently replacing feed-in-tariffs (FIT) as one main driver of this development. A prosumer, who is a consumer and producer of energy through his own DG,...
Proceedings Article

Filtration and Electrocoagulation as a Combined Process for Electroplating Wastewater

Rusdianasari, Yohandri Bow, Adi Syakdani, Muhammad Taufik
Electroplating is a method of using electrolyte solutions to cover solid materials with metal layers. The strong metal waste from the electroplating process is contained in B3 waste (Hazardous Toxic Materials). One of the methods for electroplating is by combining filtration and electrocoagulation methods....
Proceedings Article

Design of Geometric and Rigid Pavement Thickness on Jalan Lingkar Barat Sp. Sports Center - Bukit Sulap STA 0+100 - STA 7+583 Lubuklinggau City, South Sumatera Province

Kosim Kosim, Julian Fikri, Siswa Indra, Kiky Rizky Amalia, Intan Puspita Sari, Yudha Prasetya
Road construction is one of the government’s efforts to facilitate the mobilization of the Indonesian people, both economically and socially. The purpose of this study was to design the geometric and rigid pavement thickness on Jalan Lingkar Barat SP Sports Center - Bukit Sulap STA 0+100 to STA 7+583...
Proceedings Article

Power-to-Process-Heat in Industrial Combined Heat and Power Plants – Integration of a Large-Scale Thermochemical Energy Storage

Gesa Backofen, Manuel Würth, Annelies Vandersickel, Stephan Gleis, Hartmut Spliethoff
With an increasing share of electricity from renewable energy sources in the German energy market, storage systems are needed to close the gap between production and demand. The thermochemical storage system based on the reversible reaction of CaO and Ca(OH)2 is one of the most promising approaches for...
Proceedings Article

Information System Planning for Emerging Start-Up Company: A Case from Software House

Rayinda Pramuditya Soesanto, Wawan Tripiawan, Afrin Fauzya Rizana, Amelia Kurniawati, Fadillah Ramadhan
The use of IS believed to bring positive impact on the productivity and competitiveness of the organization. Most organizations in all sectors of industries, commerce, and government become fundamentally dependent on the use of information system especially startup companies. Start-up companies are considered...
Proceedings Article

The Robust Regression Performance for Face Recognition with Lighting Condition Variation of Training Data

Budi Nugroho, Anny Yuniarti
In this research, the Robust Regression method used for face recognition tested its performance with illumination variations on the training dataset. Experiments were carried out using Cropped Yale Face Database B. By using this standard face database, generally the data for the training process used...
Proceedings Article

A Decision-Making Tool Based Analysis of Onboard Electricity Storage

Egemen Sulukan, Alperen Sarı, Doğuş Özkan, Tanay Sıdkı Uyar
Energy has been used in maritime transportation, while fossil fuels began to be used more extensively since the industrial revolution to carry more products and obtain higher propulsion power. However; climate change appeared as one of the striking problem areas around the globe, where the scale and...
Proceedings Article

Research on frequency calculation of short suspender with fixed support at both ends

Yijun Liu, Lijuan Wang, Quan Chen
In order to analyze the influence of flexural stiffness on the frequency of short boom, the calculation accuracy of natural vibration frequency of short boom cable force is low. Based on the existing formula for calculating natural vibration frequency of the cable with fixed supports at both ends and...
Proceedings Article

A Study on Traffic Analysis of Cross-Border E-commerce Shops on the TikTok Platform

Jiahui Liang, Huishan Lu, Yimei Zhao, Jiayong Li, Ziyuan Liu, Yixuan Feng
Since the new crown epidemic raged at the end of 2019, the epidemic has pushed online consumption to grow rapidly and the global e-commerce penetration rate has accelerated, making consumer demand accelerate to online consumption mode and global e-commerce sales show a high growth trend. TikTok, as one...
Proceedings Article

Co-simulation-based probabilistic seismic hazard assessment method combining earthquake-event and ground-motion simulation

Shaoqing Wang, Jun Miao, Cuiran Zhang
Accurate estimation of ground-motion intensity is the key factor in probabilistic seismic hazard analysis (PSHA) at near-fault area. To get PSHA results matched with specific geological conditions near sites, we first propose a co-simulation-based PSHA method combining event-based PSHA and stochastic...
Proceedings Article

Testing Device for Biaxial Loading of Textile Specimens

Ales Lufinka
Testing of real properties of textile specimens is needed during the development of new textile structures. One of the basic test is determining the specimen stiffness, it means measurement of the dependence of the force on the textile material stretching. Textile materials are mostly used in technical...
Proceedings Article

Analysis of Cave System in Weak Sandstone Using RS2

Simon Ferley, Ian Williams
The Rocscience finite element program RS2 [1] has been used for a preliminary study to examine the stability of shallow caves in weak sandstone rock beneath a proposed development site in the UK. Focusing on the influence of in-situ horizontal earth pressures, this paper presents one of several models...
Proceedings Article

Research on the Influence of Unclosed Residential Community on the Surrounding Road Network

Yujun Deng, Xiaoning Zhu
In this study, in order to analyze the influence of unclosed residential community on the surrounding road network, a method of road network capacity evaluation was proposed, and the model of traffic flow distribution was constructed to quantitatively describe the vehicle route selection in the road...
Proceedings Article

Research on Personalized Recommendation of Magnetic Material Retrieval Based on Knowledge Mapping

Li Lei, Bai Yu
Since the concept of knowledge map was introduced, the internet has gradually changed from hyperlink between web pages to describing the association between entities.Knowledge map is mainly used in personalized recommendation and other fields. It can provide users with knowledge nodes and links between...
Proceedings Article

Pilot Free Trade Zone and Productivity of Enterprise

Yuetao Yang
From the creation of the Shanghai Free Trade Zone from September 2013 to September 2020, China has set up six batches of 21 free trade zones in batches. The establishment of free trade zones may often lead to regional economic development and also have a certain impact on the production efficiency of...
Proceedings Article

Design Compression Molding Machine with Hydraulic System

Fatahul Arifin, Yusuf Dewantoro Herlambang, Dwi Arnoldi, Eka Satria Martomi, Muhammad Noviadi, Hanif Akbar, Jihan Salsabilla
Seal is a part of the machine that is used by one of the Light Fire Extinguishers (LFE) so that the contents of this tube are kept awake until it is used to extinguish the fire. In the process of making this seal, a machine is used mold to make the seal part. One is as male (upper mold) and the second...
Proceedings Article

Generalized integral representation method as applied to numerical simulation of Boussinesq wave

Gantulga Tsedendorj, Baljinnyam Tsangia, Khongorzul Dorjgotov
In this study, we present discretization schemes based on Generalized Integral Representation Method (GIRM) for numerical simulation of the Boussinesq wave. The schemes numerically evaluate the coupled Boussinesq equation for different solitary wave phenomena, namely, propagation of a single soliton,...
Proceedings Article

IoT-based Intelligent Fishcarelab System (IFS) for Koi Fish Monitoring System

Minto Waluyo, Basuki Rahmat, Tuhu Agung Rachmanto, Mohamad Irwan Afandi, Helmy Widyantara, Harianto Harianto
Internet of Things (IoT) allows connections between devices using an internet connection with the ability to collect and exchange data. This research utilizes the IoT network to monitor the growth of koi fish in the pond. By utilizing the NodeMCU microcontroller, temperature and pH sensors, the sensor...
Proceedings Article

Study of Temperature and Use of Catalysts in the Pyrolysis of LDPE Plastic Waste on the Quantity of Oil Fuel Products Produced

Novarini, Rusdianasari, Yohandri Bow, Sigit Kurniawan
Low Density Poly Ethylene (LPDE) plastic waste has no sale value, buried in a landfill. The plastic itself cannot be broken down by microorganisms in the soil, so that people destroy it through incineration. Incineration plastics produce NOx, COx, SOx, particulates, dioxins, furans, and smoke, which...
Proceedings Article

Research on Improved Resolver-to-Digital Conversion Method and Its Application Based on FPGA

Qijia Zheng, Shuping Meng, Sixian Sun, Yang Jiang, Yang Hu
According to the demand of high integration of servo motor control system, a method of resolver-to-digital conversion (RDC) based on FPGA is proposed. This method adopts the technology of synchronous excitation and peak sampling, which can realize the peak sampling of sine signal and cosine signal of...
Proceedings Article

Tripartite Subject Game Research Based on the Engineering, Procurement, and Construction Model

Yulong Xu, Yueming Wang
Through the evolutionary game, this paper selects the general contracting unit, design unit, and construction unit as the tripartite game subjects to investigate the influence of income distribution coefficients on their behavioral strategies, and utilizes MATLAB R2016b for simulation. The results reveal...
Proceedings Article

Measuring E-Service Quality & Webqual 4.0 in ICMS Through Kano Method & Importance-Performance Analysis For Development Strategies

Billy Hartanto, Moses Laksono Singgih
This research focuses on the Palm Oil Company (POC), operating in Indonesia’s palm oil industry, and its implementation of the Integrated Calibration Management System (ICMS) application. The study aims to analyze the quality of the ICMS application and propose alternative solutions based on the quality...
Proceedings Article

Flash-aware Clustered Index for Mobile Databases

Wojciech Macyna, Michal Kukowski
Flash memory become the very popular storage technology. Recently, it may be treated as a main storage memory in mobile devices, PDA and personal computers. However, the architecture based on flash memory has some limitations. They suffer from poor write performance, as the flash blocks must be erased...
Proceedings Article

Utilization of Bottom Ash and Sawdust Waste as a Substitute for Fine Aggregate in Concrete Mix

Kosim Kosim, Zainuddin Zainuddin, Raja Marpaung, Darma Prabudi
Concrete is a split mixture, sand, cement, water, and additives. The concrete to be designed is made of a mixture of cement with bottom ash + sawdust, split, sand, and water. The purpose of this study was to determine the effect of using bottom ash + sawdust and the ratio between bottom ash + sawdust...