Proceedings of the 2nd International Seminar of Science and Applied Technology (ISSAT 2021)
374 authors
- Naufal, Muhammad
- Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
- Novianti, Syifaa
- The Role of Technology and Innovation in Creative Tourism
- Novianty, Ira
- The Relations of Job Type, Smartphone Usage, Religion, and Financial Institution Product Awareness
- Nugroho, Azis Tio
- Design and Realization of Parking System Prototype Using RFID Based Microcontroller with Reservation Service via Website for Four-wheel Vehicle
- Nugroho, F.A.
- Polysulfone Ultrafiltration Membrane for Textile Industry Wastewater Treatment
- Nugroho, F.A.
- The Influence of Applied Current Density and Agitation Speed During Electrocoagulation of Textile Wastewater
- Nurdiansyah, Hanif
- Development of Spectral Sensors for Nitrite Content in Edible Bird’s Nest
- Nurdin, Muhamad Irfan
- The Effect of Topping on Hollow Core Slab Floor Plates on Comfort Criteria Due to Vibration by Human Activities
- Nurmansyah, Reyhan Kamil
- Analysis of Condition Value and Remaining Life of Idano Mezawa Bridge, Nias District, North Sumatera
- Nurmiati, Siti
- Literature Review of E-Learning Since 2015 - 2020
- Nuryana, Irwan
- Flexural and Vibration Performance Analysis of Autoclaved Aerated Concrete (AAC) Slab
- Oesman, Mardiana
- Flexural Strengthening Reinforced Concrete Beams Subjected to Flexural Damage with CFRP
- Oesman, Mardiana
- The Behavior of Low Strength Concrete Beams Reinforced with Carbon Fibre Reinforced Polymer Under Cyclic Loading
- Oesman, Mardiana
- Flexural and Vibration Performance Analysis of Autoclaved Aerated Concrete (AAC) Slab
- Oesman, Mardiana
- The Behavior of Low -Strength Reinforced Concrete Column Strengthened with Carbon Fiber Reinforced Polymer Subjected to Cyclic Lateral Load
- Oesman, Mardiana
- The Effect of Topping on Hollow Core Slab Floor Plates on Comfort Criteria Due to Vibration by Human Activities
- Paramitha, Tifa
- Canteen Wastewater Treatment by the Activated Sludge added Bioballs
- Pasek, Ari Darmawan
- Investigation on the Interaction of Lignocellulose and Starch-Based Wastes in Wet Torrefaction Process
- Pasra, Nurmiati
- Analysis of Maximum Power Point Tracking (MPPT)
- Permatasari, Vira Indah
- The Effect of Financial Literacy and Financial Technology on MSME Profits
- Persada, Tiara Septiany
- Bandwidth Enhancement of the Rectangular Patch Antenna Using Artificial Dielectric and Proximity Coupled Line Feed
- Piash, Jahidul Hossain
- Design of an Absorber Plate for Solar Air Dryer Using Nickel Oxide Nano Particle Coating
- Prabowo, B.H.
- The Influence of Applied Current Density and Agitation Speed During Electrocoagulation of Textile Wastewater
- Pradana, Aridi Wijaya
- Flexural Strengthening Reinforced Concrete Beams Subjected to Flexural Damage with CFRP
- Prajudi, R
- Analysis of Soft Soil Shear Strength on Slopes Stabilized Using Volcanic Ash and Phosphoric Acid
- Pramono, Sabar
- Health Card for Teenager Based on Near Field Communication and IoT using Sensor Fusion Method
- Prasetya, Budi
- Marketing Network System Analysis of Relief Craft MSMEs
- Prasetyo
- Numerical Study of the Cone Angle Effect on Conical Basin Gravitational Water Vortex Turbine
- Pratama, Defrianto
- Experiments for Determining the Thermal Conductivity of Brass and 304 Stainless Steel with Direct Temperature Measurement Techniques Using Lorenz Number as Validation
- Pratama, Raksa Reza
- Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
- Pratikto
- PLC Based Remote Accessible Refrigeration Training Unit
- Pratiwi, Eka
- Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
- Prawisudha, Pandji
- Investigation on the Interaction of Lignocellulose and Starch-Based Wastes in Wet Torrefaction Process
- Prihandini, Ghusrina
- The Development of Coffee Bean Drying Process Technology – A Review
- Primajati, Gilang
- Comparison of Accuracy and Predictive Results of ES-Holt Method and ANN-Back Propagation Method: Case Study of Number of Tourists
- Pudin, Apip
- Biopolymer as Environmentally Friendly Reinforcement to Overcome Cracked Soil Problems on Expansive Soil:
- Purbayati, Radia
- Millennials’ Intention Towards Syariah Card: The Roles of the Theory of Planned Behavior and Product Knowledge
- Purnama, Hari
- Effect of Distributed Generation Based on Synchronous Generator on Fuse Recloser Protection Coordination in Medium Voltage Network
- Purnomo, Ilham
- Efforts to Repair Groundsill Bantar River Progo Special Region of Yogyakarta Indonesia
- Putri, Ghania Yuntafa
- Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
- Putri, Kiran Aulia
- Play & Fun Portal to Support “Steam” Learning Method in Early Childhood
- Qamaruddin, Naufal
- Implementation of Adaptive Neuro-Fuzzy Inference System Control on Pneumatic Solar Tracker
- Qudriyah, Haqqi Lailatul
- An Analysis of Sustainable Finance Disclosure at Indonesian Sharia Commercial Banks using POJK 51/POJK.03/2017
- Rafdinal, Wahyu
- The Role of Technology and Innovation in Creative Tourism
- Rafdinal, Wahyu
- Esports: An Empirical Study of Factors Affecting Continuance Intention
- Raharjo, Agoeng Harjatmo
- Initial pH Influence on Organic Pollutants, Total Suspended Solids, and Nickel Removal from Citarum River Water Using Electrocoagulation
- Rahmawati, Yuliana Nur
- The Characteristic of a 3.5 GHz Circular Patch Antenna Using Open-Ring Artificial Dielectric
- Raji, Luqman
- Using Feasibility Index Model to Investigate Human Thermal Comfort Under Weather Data of Mubi, Adamawa State, Nigeria
- Ramadhan, Gilang
- Antecedents and Consequences of Organizational Innovation: Study on Small and Medium Enterprises in the Consumer Goods Industry
- Ramadhani, Laily Isna
- Comparison Between Sequencing Batch Reactors (SBR) and Stirred Tank Reactors (STR) in Handling Hydraulic Shock Loads
- Ramdhani, Afdhal Lazuardiansyah
- Response of Cable-Stayed Bridge Under Ground Motions
- Razali, Sazalinsyah
- Literature Review of E-Learning Since 2015 - 2020
- Rezeki, Pamella M Sri
- The Reinforcement of Flexible Composite Beams Laminated Camphor – Reinforced Concrete
- Rifa’i, Awaludin Fitroh
- Canteen Wastewater Treatment by the Activated Sludge added Bioballs
- Riniati
- The Effect of Organic Acids Concentration Extracted from the Fruit on the Conversion of Starch to Glucose Using Microwave-Assisted Acid Hydrolysis (MAAH)
- Riniati
- Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
- Roskha, Piona
- Play & Fun Portal to Support “Steam” Learning Method in Early Childhood
- Rufaedah, Yanti
- The Effect of Employee Competence, Leadership Commitment, and Internal Audit Role on the Quality of State Property Accounting Information
- Rustawa, Nita Widia Khairinnisa
- Material Protection for Citarum River-Bed by Local Scour used What-If Analysis
- Said, Mohd Farid Muhamad
- Conversion of Crude Hevea brasiliensis Oil to Biodiesel Utilizing Perna viridis Waste Shells as Solid Catalysts
- Saki, Md. Ektiyer
- Design and Development of a Small-Capacity Tesla Turbine for Rural Applications
- Sakib, An Najmus
- Design and Analysis of a Solar Dryer for the Rural Areas of Bangladesh
- Salsabila, Adira
- Position Coordination Aid for Blind Persons Based on LoRa Point to Point
- Santoso, Ari Fajar
- Framework for Measuring Readiness of Satu Data Indonesia (SDI) Implementation
- Santoso, Jessy Nasyta Putri
- Flood Detection System Using Ultrasonic Sensor with Fuzzy Logic Method
- Saputra, Fiter Yogie
- Health Card for Teenager Based on Near Field Communication and IoT using Sensor Fusion Method
- Saputri, Lilezha
- Understanding Offline Shopping Intentions During Pandemic
- Sardjito
- Comparison of Newton Correction Between Joule’s Law Experiment and Ice Heat of Fusion Experiment
- Sardjito
- Temperature Dependence on Distance from Heat Source Objects
- Sardjito
- The Relationship Between Measurable Temperature by Infrared Thermometer with the Distance to Heat Source
- Sardjito
- The Characteristic of a 3.5 GHz Circular Patch Antenna Using Open-Ring Artificial Dielectric
- Sardjito
- Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
- Sartika, Euis
- Application of the Geographically Weighted Regression (GWR) with the Bi-Square Weighting Function on the Poverty Model in the City/Regency of West Java
- Sartika, Euis
- Determination of the Fastest Path on Logistics Distribution by Using Dijkstra Algorithm
- Sarwar, Ishrak
- A Computational Model for Performance Optimization of a Stepped Solar Still
- Sarwar, Ishrak
- Design of an Absorber Plate for Solar Air Dryer Using Nickel Oxide Nano Particle Coating
- Semiawan, Transmissia
- Analysis of the Effectiveness and Efficiency of Software Development Tools
- Senalasari, Widi
- A New Strategy Approach to Sustainable Tourism Development: Moving Beyond from Pandemic Outbreak Through Tourism Technology
- Setiadi, Budi
- Position Coordination Aid for Blind Persons Based on LoRa Point to Point
- Setiadi, Budi
- Implementation of Adaptive Neuro-Fuzzy Inference System Control on Pneumatic Solar Tracker
- Setiadi, Harry
- Modification of the Single-Phase AC Induction Motor to the Low-Speed Single-Phase AC Permanent Magnet Generator
- Setiawan, Adi
- The Behavior of Low Strength Concrete Beams Reinforced with Carbon Fibre Reinforced Polymer Under Cyclic Loading
- Setiawati, Lina
- Tourist Motivation and Satisfaction Towards Hot Springs Destination
- Setiawati, Lina
- A New Strategy Approach to Sustainable Tourism Development: Moving Beyond from Pandemic Outbreak Through Tourism Technology
- Setiawati, Lina
- Factor Analysis of Hot Springs Tourist Motivation
- Setyowati, Tri
- Antecedents and Consequences of Organizational Innovation: Study on Small and Medium Enterprises in the Consumer Goods Industry
- Shoelarta, S.
- Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
- Sholehah, Syifa Alfina
- Study of Control Well to Prevent Landslides Risk During Construction of Cisumdawu Toll Road
- Sihombing, Pardomuan Robinson
- Comparison of Accuracy and Predictive Results of ES-Holt Method and ANN-Back Propagation Method: Case Study of Number of Tourists
- Simanjuntak, Asep Barnas
- Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
- Sirri, Ahmad
- The Relations of Job Type, Smartphone Usage, Religion, and Financial Institution Product Awareness
- Slameto
- Investigation of the Utilization of Kaplan Turbines for PLTMH Power Plants
- Soeswanto, Bambang
- The Development of Coffee Bean Drying Process Technology – A Review
- Sofian
- Loyalty Towards Islamic Microfinance: The Roles of Perception, Expectation, and Trust
- Sofyan, Y.
- Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
- Solihin, Ridwan
- Position Coordination Aid for Blind Persons Based on LoRa Point to Point
- Sosianika, Adila
- Exploring Social Entrepreneurship in the Community Affected by the Jatigede Reservoir Infrastructure Development Project
- Sriyono, Edy
- Efforts to Repair Groundsill Bantar River Progo Special Region of Yogyakarta Indonesia
- Suciyani, Wida Oktavia
- The Effect of Employee Competence, Leadership Commitment, and Internal Audit Role on the Quality of State Property Accounting Information
- Sudarman, Robby
- Canteen Wastewater Treatment by the Activated Sludge added Bioballs