Series:Advances in Physics Research
Proceedings of the 2015 International Conference on Material Science and Applications
724 authors
- A, Du
- Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
- Abdulkadir, Abdulsalam
- Fluorescent Biocompatible Tactic PMMA-QDs Thin Films
- An, Li-Qiang
- Warping Effect to Bend-twist Coupling Characteristics for Box Spar of Wind Turbine Blade
- An, Zhi-Yong
- Reading Correction of Two-dimensional Electric Rotating-mirror Based on Optical Transmission Matrix
- Bai, Jian-Hua
- The Review of Construction Technologies Using Fuzzy-Ball Workover Fluid in Well C22 and Well F20 of SZ36-1 Offshore Oilfield
- Bai, Ni
- Adsorption and Precipitation of Organic Phosphonates onto the Calcite Stepped Surfaces
- Bai, Zhi-Fei
- Melting and Crystallization Behaviors of Poly(lactic acid)/Polypropylene Blends
- Bao, Hui-Qiang
- Antioxidant Synergistic Effect and Formulation Optimization of Several Common Natural Pigments
- Bao, Zu-Hua
- Influence of Heat Treatment on Hot-rolled Sheet Forming of Ti–6Al–4V Alloy
- Bi, Da-Sen
- Automotive Sheet Metal SAPH440 and Q235 Formability of Comparative Study
- Bin, Hao-Yu
- Effect of TIG Weld Current on 1Cr18Mn8Ni5N Austenitic Stainless Steel Welding Microstructure and Mechanical Properties
- Burns, Jonathan
- Corrosion of Permanent Mold Cast Magnesium Alloy AJ62 in Automotive Environments
- Cai, Pei-Ling
- Study on Histocompatibility and Biodegradability of Polylactic Acid Gel in Rats
- Cai, Wei
- An Experimental Study of the Property of Phase Transition Temperature for Organic Composites Phase Change Materials
- Cai, Ying-Jie
- Effect of Cationic UV Absorber on Light Fastness Property of Reactive Dye
- Cai, Ying-Jie
- Conventional and Single-step Pretreatment Process of Cotton Woven Fabric
- Cao, Fei
- Photosensitive Hyperbranched Aliphatic Polyester Based on 2,2-dihydroxymethyl Butyric Acid
- Cao, Quoc Dinh.
- Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
- Cao, Zhuo-Kun
- The Manufacturing Technology of Aluminum Foam Material and Some Special Equipments
- Chang, Mei-Qi
- Facile Synthesis and Luminescence Properties of Silica Submicron Rods
- Chang, Meng-Zhou
- Tensile Test Performance of Fibre Reinforced SMATed Aluminium Laminates
- Chen, Chun-Yu
- Adsorption and Precipitation of Organic Phosphonates onto the Calcite Stepped Surfaces
- Chen, Dong
- A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
- Chen, F.
- Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
- Chen, F.
- Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
- Chen, Gang
- Numerical Simulation on Impacting Experiments of the Projectile Recovery System
- Chen, Hong-Fei
- Core/Sheath Structured PVA Micro/Nano Composite Fibers for Biomedical Applications
- Chen, Jie
- Facile Synthesis and Luminescence Properties of Silica Submicron Rods
- Chen, Kui
- The Cost Reduction Research of GPTMS-Boehmite Transparent and Hard Coating Film
- Chen, Liu-Meng
- Preparations of Methylphenyldiethoxsilane by One Step Grignard Method and Methylphenylcyclosiloxane by Hydrolysis and Pyrolysis Methods
- Chen, Min-Zhi
- Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal
- Chen, S.
- Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
- Chen, S.
- Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
- Chen, Shi-Jian
- Preparation of Methylphenylvinyl Raw Rubber by Bulk Polymerization and Ring-Opening Polymerization Methods
- Chen, Su-Hua
- Preparation of Bi2WO6 Nanoparticles with Improved Photocatalytic Properties by Adding Triblock Copolymer P123
- Chen, Tian-Li
- Fatigue Strength Research on Aluminum Alloy Car Body for Railway Vehicle Based on Finite Element Analysis Method
- Chen, Xue-Jian
- The Comparative Analysis between Truss Aqueduct and Cable-stayed Aqueduct
- Chen, Yi-Meng
- Establishing and Optimizing AFLP Amplification Reaction System of Shiraia Bambusicola
- Chen, Yi-Ming
- The Influence of Mineral Salt Interface Modifier to Pavement Rubber Concrete Strength
- Chen, Yi-Wei
- Advances on Manufacturing of POSS Reinforced Resin Matrix Composites
- Chen, Ze-Li
- Determination of the Fluroxypyr Ester by HPLC with Internal Standard
- Cheng, Li-Jia
- Study on Histocompatibility and Biodegradability of Polylactic Acid Gel in Rats
- Cheng, Yong
- Determination of Micro Impurity Element Potassium in Sodium Metavanadate by ICP-OES
- Chenlai, Jia-Cuo
- Classifications and Development Frameworks of Tourist Resorts Based on Geospatial Division Theory: A Case Study of Sichuan Province, Western China
- Chi, Sen
- An Analysis of Microscopic Morphology and Organization of 1Cr18Ni9Ti
- Chi, Shu-Heng
- Preparation, Linear Spectrum and Nonlinear Two-photon Absorption Properties of Fluorenone Derivative Containing 4-Methoxystyrene
- Cui, Li-Hua
- Nano-TiO2/Chitosan Coated Antibacterial Paper and Its Preservation Effect in Packaging Nanguo Pear
- Cui, Shi-Bao
- Reading Correction of Two-dimensional Electric Rotating-mirror Based on Optical Transmission Matrix
- Cui, Tai-Song
- Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal
- Dai, Jun
- The Design of Bullet Train Process Bogie and the Finite Element Analysis of Frame Strength
- Dai, Li-Xing
- Core/Sheath Structured PVA Micro/Nano Composite Fibers for Biomedical Applications
- Dai, Li-Xing
- Preparation of Polyimide Films Derived from a Novel Precursor Pre-imidized Poly (amic acid) Ammonium Salt
- Dai, Xiu-Qian
- The Preparation of ZnO/AC Composite Photocatalytic Material for Coking Wastewater Treatment
- Deng, Hong-Yu
- The Influence of Reinforcement Ratio to the Mechanical Behavior of Reinforced Concrete Column
- Deng, Wen-Chang
- Study on the Photosynthetic Efficiency of the Dracontomelon Duperreanum Leaves by Using Photo-acoustic Tomography Spectroscopy
- Diao, Gui-Qiang
- Analysis of pH Dependent Luminescence of an Europium Complex
- Ding, X.Y.
- Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
- Ding, Xiao-Heng
- Study of Heat Flux Sensor Test Containing Metal Phase Change Heat Sink
- Ding, Xiu-Juan
- Development of Novel Inorganic Antibacterial Material
- Ding, Yu-Mei
- Research on the Effects of Different Types of Materials on Micro-membrane
- Dong, Hong-Xia
- Effect of Post-processing on Photoluminescence and Surface Composition of Porous Silicon
- Dong, Kang-Cheng
- Iron-based Powder Metallurgy Steel Collar Chemical Treatment Process Test
- Dou, Qiang
- Melting and Crystallization Behaviors of Poly(lactic acid)/Polypropylene Blends
- Du, Chen-Xi
- Experimental Study on Pretreatment of Preparing Phosphorus Building Gypsum with Yunnan Phosphogypsum
- Du, J.
- The Vacancy-hardening Properties in Water-quenched Fe-Al Alloys
- Du, Jing
- Photosensitive Hyperbranched Aliphatic Polyester Based on 2,2-dihydroxymethyl Butyric Acid
- Du, Rong-Yi
- Traffic Flow Registraton for Unmanned Aerial Vehicle Detection
- Du, Shuang-Ming
- Diffusion Bonding of Magnesium Alloy (AZ31B) to Cu by Using Sn Foil Interlayer
- Duan, Mao-Chang
- Investigation of High Efficiency SIMPLE Algorithm Based on Single Staggered Grid for Sewage Treatment System
- Fan, Kun
- Effect of Post-processing on Photoluminescence and Surface Composition of Porous Silicon
- Fang, Bo
- Design of Smart Home System Based on Service Encapsulation and Device Abstraction
- Fang, Feng-Rong
- Application of Hydroxamic Modified Calix[6]arene for Selective Extraction of Uranium (VI)
- Fang, Hua
- Experimental Research on Mechanical Properties of Fiber Reinforcement Cement Stabilized Soil
- Feng, Ying
- Synthesis and Photocatalytic Activity of M–doped CaBiO2Cl (M = Ag, Co, and Ni) under Visible Light
- Feng, Zhen
- Fatigue Strength Research on Aluminum Alloy Car Body for Railway Vehicle Based on Finite Element Analysis Method
- Fu, Yu-Xia
- Research on the Dynamics of Red Tide Algae Density Evolution Mechanism and Control
- Gao, Feng
- Investigation of High Efficiency SIMPLE Algorithm Based on Single Staggered Grid for Sewage Treatment System
- Gao, G.D.
- Hot Compression Behavior of Al-Zn-Mg Aluminium Alloy: Experiments and Simulations
- Gao, Hong-Bing
- Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
- Gao, Jun-Shan
- Study on Synthesis and Self-assemble Nano-materials of Tetra-substituted Phenoxy Nickel Phthalocyanine
- Gao, Qun
- Nanocomposite Reinforcement Effects in Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes
- Gao, Qun
- Modification of Regeneration Polyurethane by Blend with Ternary Nylon
- Gao, Qun
- Research on the Properties of Rigid Polyurethane Foam with Heteroaromatic Polyol
- Gao, Qun
- Effect of Nano-ZrO2 on Properties of Room Temperature Vulcanization Phenyl Silicone Rubber
- Gao, Qun
- Study on the Properties of Nano-Al2O3/Phenyl Silicone Rubber Composites
- Gao, Shi-Zhe
- A Study of Preparation and Performance of the PCMs of the CA-LA Swelling Vitrified Beads
- Gao, Yan
- Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection
- Ge, Rui
- The Application of High Efficient Fatigue Testing Method on Engineering Machinery Steel
- Ge, Ying-Fei
- Cutting Force Investigation when Heavy Milling Welded Aluminum-Thin- Walled Hollow Structure
- Gong, Bing
- Nanocomposite Reinforcement Effects in Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes
- Gong, Peng-Han
- A Research on the Application of MTI in Motion Parameters Measurement on Human-rifle System
- Gong, Xiao-Ling
- Effect of Cryogenic Treatment on Film-substrate Bonding Strength of DLC Film/High-speed Steel
- Gong, Zhong-Ping
- Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
- Groff, Steve
- A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
- Gu, Jiang
- The Structure and Electronic Properties of C80 Carbon Nanotube
- Gu, S.Y.
- The Vacancy-hardening Properties in Water-quenched Fe-Al Alloys
- Guo, Bin
- Effect of Modifiers on Injection Molding of Waste Polyethylene Drip Tape
- Guo, C.
- Design of the Lightweight Structure Inspired by Beetle Elytra and Its Mechanical and Thermal Properties
- Guo, Chang-Qing
- Microstructures of Surface Alloyed High Manganese Cast Steels
- Guo, Hong
- Research on the Properties of Rigid Polyurethane Foam with Heteroaromatic Polyol