Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022) - Authors

Series:Atlantis Highlights in Material Sciences and Technology

Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)

311 authors

Li, W.: Research on Servo and Drive System of Hot Stamping Mechanical Servo Press
Li, X. L.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Li, X. Q.: Application and Lightweight Research of QP1180 High Strength Steel in Autobody Reinforcement Part
Li, X. T.: A Novel High Strength Low Temperature Hot Forming Steel
Li, Y.: Properties and Application of 2000 MPa Grade Hot Stamping Steel
Li, Z. T.: Effect of Annealing Time on the Microstructure and Mechanical Properties of Lightweight Medium Manganese Steel
Li, Z. Y.: Application and Lightweight Research of QP1180 High Strength Steel in Autobody Reinforcement Part
Liang, J. T.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Liang, J. T.: The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
Liang, X.: Research and Application of Variable Strength Hot Stamping Process and Die
Liang, Z. W.: Study on Strengthening Mechanism and Application Performance of the High Toughness 2 GPa Hot Forming Steel
Liang, Z. W.: Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
Lin, J. P.: An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
Lin, J. P.: A Software System to Accurately Calculate Parts Temperature for Hot Stamping
Lin, Q. Q.: The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping
Lin, T.: Effect of Annealing Time on the Microstructure and Mechanical Properties of Lightweight Medium Manganese Steel
Liu, B.: Application and Lightweight Research of QP1180 High Strength Steel in Autobody Reinforcement Part
Liu, D. H.: Multi-cavity Hot Stamping Die Cooling Water Flow Distribution Method Based on Equivalent Water Resistance
Liu, H. L.: Effect of Vanadium on Austenite Grain Refinement and Martensite Structure
Liu, H. L.: Influence of Annealing Temperatures on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel
Liu, J.: Microstructure and Properties Evolution of the Medium Manganese Steel During Inter-critical Annealing Heat Treatment and Its Influence by Vanadium Microalloying
Liu, K.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Liu, L. P.: Study on Strengthening Mechanism and Application Performance of the High Toughness 2 GPa Hot Forming Steel
Liu, P.: Integral Hot Stamping Process of Tailor-Welded Door Ring Based on the Multi-objective Optimization Genetic Algorithm
Liu, S.: Study on Austenitizing Process in Hot Stamping of 2000 MPa Grade Ultra-High Strength Steel
Liu, S.: Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
Liu, T.: Study on Strengthening Mechanism and Application Performance of the High Toughness 2 GPa Hot Forming Steel
Liu, W. G.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Liu, Y.: Properties and Application of 2000 MPa Grade Hot Stamping Steel
Liu, Y.: Research on the Joint Strength of 6061 Aluminum Alloy/CFRP Multi-layer Laminate Made by Stamping-Joining Integrated Process
Liu, Y.: Hot Stamping of a TRB Part in an Electric MPV Vehicle
Lu, H. Z.: Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
Lu, H. Z.: The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
Lu, H. Z.: Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
Lu, J.: Integral Hot Stamping Process of Tailor-Welded Door Ring Based on the Multi-objective Optimization Genetic Algorithm
Lu, L.: Improve the Efficiency of the Entire Line by Optimizing the Hot Stamping Production Control Process and Auxiliary Tools
Luo, M. F.: Research and Application of Variable Strength Hot Stamping Process and Die
Luo, X.: A Novel High Strength Low Temperature Hot Forming Steel
Lv, B.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Ma, M. T.: Forming Limit Diagram Test of Press Hardening Steel Sheet at Elevated Temperatures
Ma, M. T.: The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
Ma, M. T.: Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
Ma, M. T.: The Effect of Pre-compression Deformation on the Mechanical and Bending Properties of DP590
Ma, M. T.: Stiffness Analysis and Design Optimization of Hot-Stamped Lightweight Wheels
Ma, M. T.: Stress Analysis and Optimization of Hot-Formed Lightweight Wheels
Ma, Mingtu: Peer-Review Statements
Ma, W. Y.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Maier, D. M.: Improvements in Laser Processing of Hot-Forming Materials with 3D-5axis Laser Machines
Mao, J. Y.: Simulation Research on the Quenching and Partition Process of a Medium Manganese Steel
Mei, Y. Q.: Nondestructive Testing of Medium Manganese Steel Based on Barkhausen
Mi, Z. L.: Effect of Microalloying and Quenching Process on Cold Bending Properties of 38MnB5 Hot Forming Steel
Min, J. Y.: An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
Ning, Y. T.: Effect of Vanadium on Austenite Grain Refinement and Martensite Structure
Oberroither, C.: Tool Steel Solutions for In-Die Trimming and Punching of Modern Light Weight Parts Produced via Hot Stamping
Pan, H.: Performance Evaluation and Application of the Laser Welded Joint with Filler Wire for Al-Si Coated Press-Hardened Steels
Parma, G.: Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
Pei, J. S.: Nondestructive Testing of Medium Manganese Steel Based on Barkhausen
Pieronek, D.: Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
Qi, X. J.: Hot Stamping of a TRB Part in an Electric MPV Vehicle
Qi, Y. L.: Properties and Application of 2000 MPa Grade Hot Stamping Steel
Qu, S. F.: Comparison of Heat Transfer Performance Between Coated Boron Steel and Uncoated Boron Steel During Hot Stamping
Qu, S. F.: Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching
Ran, J. M.: Realistic Microstructural RVE-Based Simulations of Stress-Strain Behavior of a Medium-Manganese Steels
Ren, X. Q.: A New Structural Door of Box Type Heating Furnace
Ruthenberg, M.: Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
She, J. L.: Integral Hot Stamping Process of Tailor-Welded Door Ring Based on the Multi-objective Optimization Genetic Algorithm
Shi, L. Y.: An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
Shi, L. Y.: A Software System to Accurately Calculate Parts Temperature for Hot Stamping
Shu, K. Y.: Hot Stamping Blank Position Detection System Based on Infrared Image
Song, H.: Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
Song, Y. L.: Integral Hot Stamping Process of Tailor-Welded Door Ring Based on the Multi-objective Optimization Genetic Algorithm
Stille, S.: Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
Sun, C.: Research and Application of Combined Forming Method of Multi-scale Hot Stamping Parts
Sun, C.: Improve the Efficiency of the Entire Line by Optimizing the Hot Stamping Production Control Process and Auxiliary Tools
Sun, C.: Strategies and Techniques for Improving Production Efficiency of Hot Stamping
Sun, Q.: Development and Performance Evaluation of Hot Stamping Die Steel with Long Service Life
Sun, S. H.: Influence of Precipitation Behavior of (Ti, Mo)C Carbides on the Microstructure and Mechanical Properties of Medium Manganese Steels
Sun, Y. P.: The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
Sun, Y. P.: Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
Sun, Y. P.: Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology
Sun, Y. P.: Experimental Study on Contact Heating Method in Solid Solution Process of Aluminum Alloy
Tan, W. Z.: Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
Tang, J. J.: Comparison of Heat Transfer Performance Between Coated Boron Steel and Uncoated Boron Steel During Hot Stamping
Tang, X.: Multi-cavity Hot Stamping Die Cooling Water Flow Distribution Method Based on Equivalent Water Resistance
Tang, X. P.: Research and Application of Variable Strength Hot Stamping Process and Die
Tang, Y.: Hot Stamping Blank Position Detection System Based on Infrared Image
Tao, P.: Properties and Application of 2000 MPa Grade Hot Stamping Steel
Teng, H. X.: Effects of Different Baking Temperature on Three-Point Bending Properties of 1800 MPa Al-Si Coating Hot Stamping Steel
Teng, H. X.: A Novel High Strength Low Temperature Hot Forming Steel
Tian, Z. H.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Wang, G. Y.: The Effect of Pre-compression Deformation on the Mechanical and Bending Properties of DP590
Wang, H. Y.: Factors Affecting Intrusion Resistance of Hot Stamping Steel
Wang, J. C.: An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
Wang, J. F.: Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
Wang, J. Y.: The Principle and Control Method of Belt Support Industrial Laser Cutting Machine
Wang, K.: Rapid Heating Process of Ultra-high Strength Zinc-Coated Steel and Its Effect on Corrosion Resistance
Wang, K.: The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping
Wang, L.: Development and Performance Evaluation of Hot Stamping Die Steel with Long Service Life
Wang, L.: Research and Application of Temperature Monitoring and Error Correction System for High-Strength Steel Hot Stamping Parts
Wang, L.: Hot Stamping Blank Position Detection System Based on Infrared Image