Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
311 authors
- An, B. Q.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- An, B. Q.
- Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology
- An, B. Q.
- Experimental Study on Contact Heating Method in Solid Solution Process of Aluminum Alloy
- Banik, J.
- Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
- Cai, M. H.
- Influence of Precipitation Behavior of (Ti, Mo)C Carbides on the Microstructure and Mechanical Properties of Medium Manganese Steels
- Cai, Z. H.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Cao, M.
- Study on Austenitizing Process in Hot Stamping of 2000 MPa Grade Ultra-High Strength Steel
- Cao, P. G.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Che, X.
- Study on Austenitizing Process in Hot Stamping of 2000 MPa Grade Ultra-High Strength Steel
- Chen, B.
- Study on Strengthening Mechanism and Application Performance of the High Toughness 2 GPa Hot Forming Steel
- Chen, C. L.
- Research and Application of Combined Forming Method of Multi-scale Hot Stamping Parts
- Chen, C. L.
- Improve the Efficiency of the Entire Line by Optimizing the Hot Stamping Production Control Process and Auxiliary Tools
- Chen, C. L.
- Strategies and Techniques for Improving Production Efficiency of Hot Stamping
- Chen, H. Q.
- Study on Austenitizing Process in Hot Stamping of 2000 MPa Grade Ultra-High Strength Steel
- Chen, J.
- Research on Servo and Drive System of Hot Stamping Mechanical Servo Press
- Chen, J. Y.
- Research on the Joint Strength of 6061 Aluminum Alloy/CFRP Multi-layer Laminate Made by Stamping-Joining Integrated Process
- Chen, J. Y.
- Hot Stamping of a TRB Part in an Electric MPV Vehicle
- Chen, Y.
- Effect of Vanadium on Austenite Grain Refinement and Martensite Structure
- Chen, Y.
- Influence of Annealing Temperatures on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel
- Chen, Y. S.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- Chen, Z.
- Comparison of Heat Transfer Performance Between Coated Boron Steel and Uncoated Boron Steel During Hot Stamping
- Chen, Z.
- Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching
- Cheng, C. J.
- Study on Influencing Factors of Resistance Spot Welding Performance of Press-Hardened Steel
- Cui, L.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- Cui, L.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Dai, P. H.
- Study on Influencing Factors of Resistance Spot Welding Performance of Press-Hardened Steel
- Deng, J. L.
- Research and Application of Variable Strength Hot Stamping Process and Die
- Deng, S. R.
- Research and Application of High-Performance Conveying System for Multilayer Chamber Furnace Hot Stamping Production Line
- Deng, Z. G.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Deng, Z. J.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- Deng, Z. J.
- Study on the Color Transformation Law of Al-Si Coating with Different Weight After Press Hardening
- Ding, K.
- Performance Evaluation and Application of the Laser Welded Joint with Filler Wire for Al-Si Coated Press-Hardened Steels
- Dong, W. Z.
- The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping
- Du, L. X.
- High Strength-Ductility Combination of a Medium-Mn Steel Through Pre-annealing and Fast Heating
- Fan, T. Q.
- Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
- Fang, D. Y.
- Rapid Heating Process of Ultra-high Strength Zinc-Coated Steel and Its Effect on Corrosion Resistance
- Fang, D. Y.
- The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping
- Fang, G.
- Forming Limit Diagram Test of Press Hardening Steel Sheet at Elevated Temperatures
- Fang, J. C.
- Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
- Fang, X.
- Research on Servo and Drive System of Hot Stamping Mechanical Servo Press
- Feng, G.
- Application and Lightweight Research of QP1180 High Strength Steel in Autobody Reinforcement Part
- Feng, G.
- 1700MPa UHSS 3D Roll Bending a Pillar Reinforcement in the CFRP Side Frame for Ultimate Lightweight and Crash Safety
- Feng, Y.
- Study on Austenitizing Process in Hot Stamping of 2000 MPa Grade Ultra-High Strength Steel
- Feng, Y.
- Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
- Feng, Y.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- Feng, Y.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Feng, Y.
- Effect of Annealing Time on the Microstructure and Mechanical Properties of Lightweight Medium Manganese Steel
- Frey, A.
- Improvements in Laser Processing of Hot-Forming Materials with 3D-5axis Laser Machines
- Fritz, M.
- Improvements in Laser Processing of Hot-Forming Materials with 3D-5axis Laser Machines
- Gao, C.
- 1700MPa UHSS 3D Roll Bending a Pillar Reinforcement in the CFRP Side Frame for Ultimate Lightweight and Crash Safety
- Gao, E.
- Improvements in Laser Processing of Hot-Forming Materials with 3D-5axis Laser Machines
- Gao, X.
- Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
- Gao, X.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Gao, Y. L.
- Performance Evaluation and Application of the Laser Welded Joint with Filler Wire for Al-Si Coated Press-Hardened Steels
- Ge, R.
- Microstructure and Properties Evolution of the Medium Manganese Steel During Inter-critical Annealing Heat Treatment and Its Influence by Vanadium Microalloying
- Geng, Y. Z.
- Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology
- Gu, Y. K.
- An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
- Gu, Y. K.
- A Software System to Accurately Calculate Parts Temperature for Hot Stamping
- Guo, A. M.
- The Effect of Dew Point Control on Hydrogen Embrittlement of Al-Si Coated Hot-Stamping Components
- Guo, M. Q.
- Research and Application of High-Performance Conveying System for Multilayer Chamber Furnace Hot Stamping Production Line
- Guo, X. M.
- Simulation Research on the Quenching and Partition Process of a Medium Manganese Steel
- Han, B.
- Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
- Han, X. H.
- Comparison of Heat Transfer Performance Between Coated Boron Steel and Uncoated Boron Steel During Hot Stamping
- Han, X. H.
- Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching
- Han, Z. Y.
- Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology
- Han, Z. Y.
- Experimental Study on Contact Heating Method in Solid Solution Process of Aluminum Alloy
- He, P. X.
- An Infrared Temperature Measurement Method for Hot Stamping Parts Considering Directional Emissivity
- He, P. X.
- A Software System to Accurately Calculate Parts Temperature for Hot Stamping
- Hu, X. Y.
- Realistic Microstructural RVE-Based Simulations of Stress-Strain Behavior of a Medium-Manganese Steels
- Hua, L.
- Integral Hot Stamping Process of Tailor-Welded Door Ring Based on the Multi-objective Optimization Genetic Algorithm
- Huang, G. J.
- Study on the Impact Safety Improvement of Microalloyed Element on Automobile Hot Stamped Bumper
- Huang, G. J.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Huang, J.
- A Novel High Strength Low Temperature Hot Forming Steel
- Huang, S. T.
- Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching
- Jesner, G.
- Tool Steel Solutions for In-Die Trimming and Punching of Modern Light Weight Parts Produced via Hot Stamping
- Ji, Y. Y.
- Study on Influencing Factors of Resistance Spot Welding Performance of Press-Hardened Steel
- Jiang, H. T.
- Effect of Microalloying and Quenching Process on Cold Bending Properties of 38MnB5 Hot Forming Steel
- Jiang, J. W.
- Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
- Jiang, W. J.
- Research and Application of High-Performance Conveying System for Multilayer Chamber Furnace Hot Stamping Production Line
- Jing, C. N.
- Effect of Annealing Time on the Microstructure and Mechanical Properties of Lightweight Medium Manganese Steel
- Jing, T.
- Effect of Vanadium on Austenite Grain Refinement and Martensite Structure
- Jing, T.
- Influence of Annealing Temperatures on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel
- Koeyer, M.
- Minor Addition with Substantial Effect - New Aluminum-Silicon Coating for a Reliable Hot-Forming Process
- Kohllöffel, R.
- Improvements in Laser Processing of Hot-Forming Materials with 3D-5axis Laser Machines
- Lan, H. F.
- High Strength-Ductility Combination of a Medium-Mn Steel Through Pre-annealing and Fast Heating
- Le, J. M.
- Research and Application of Combined Forming Method of Multi-scale Hot Stamping Parts
- Li, B.
- Stiffness Analysis and Design Optimization of Hot-Stamped Lightweight Wheels
- Li, B.
- Stress Analysis and Optimization of Hot-Formed Lightweight Wheels
- Li, D. Y.
- Research and Application of Multi-layer Box Furnace for High-Performance Sheet Metal Hot Stamping Production Line
- Li, J. H.
- Effect of Die Coating on Friction Behavior of 7075 Aluminum Alloy Sheet in Hot Stamping
- Li, J. L.
- Properties and Application of 2000 MPa Grade Hot Stamping Steel
- Li, J. P.
- High Strength-Ductility Combination of a Medium-Mn Steel Through Pre-annealing and Fast Heating
- Li, J. Q.
- Research and Application of Multi-layer Box Furnace for High-Performance Sheet Metal Hot Stamping Production Line
- Li, J. W.
- The Effect of Pre-compression Deformation on the Mechanical and Bending Properties of DP590
- Li, J. W.
- Stiffness Analysis and Design Optimization of Hot-Stamped Lightweight Wheels
- Li, J. W.
- Stress Analysis and Optimization of Hot-Formed Lightweight Wheels
- Li, J. Y.
- Analysis of Effect of Coating Crack on Hot-Formed Al-Si Coated Steel Sheet After Heating
- Li, K. J.
- Improvement Study of Hydrogen Embrittlement Resistance of Al-Si Coated Hot Stamped Components
- Li, S. C.
- Factors Affecting Intrusion Resistance of Hot Stamping Steel
- Li, T. H.
- 1700MPa UHSS 3D Roll Bending a Pillar Reinforcement in the CFRP Side Frame for Ultimate Lightweight and Crash Safety