Research and Application of Combined Forming Method of Multi-scale Hot Stamping Parts

DOI

10.2991/978-94-6463-114-2_39How to use a DOI?

Keywords

High-strength steel; Hot stamping; Multi-scale parts combination

Abstract

It is easier to realize the “one-mold multi-cavity” forming process for large-scale parts or parts with similar dimensions, and the blank size is similar to facilitate the transport of the manipulator. Since the mold positioning space is sufficient, stable positioning can be obtained with a simple method and device. When parts of different sizes are combined into the production of family kits, there are many difficulties in positioning the upper mold of the conveyor for the blanks of parts of different sizes. Through simulation research and experiments, a combined forming method that meets the requirements of multi-scale hot stamping parts is developed, the cost of the mold is reduced, and the process is simple and feasible.

Copyright

© 2023 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - C. Sun
AU  - J. M. Le
AU  - C. L. Chen
PY  - 2023
DA  - 2023/03/02
TI  - Research and Application of Combined Forming Method of Multi-scale Hot Stamping Parts
BT  - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
PB  - Atlantis Press
SP  - 284
EP  - 287
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-114-2_39
DO  - 10.2991/978-94-6463-114-2_39
ID  - Sun2023
ER  -