Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching
- DOI
- 10.2991/978-94-6463-114-2_36How to use a DOI?
- Keywords
- Hot stamped ultra-high strength steel; Die punching; Sheared edge quality; Fracture model
- Abstract
Due to the advantages of high efficiency, low energy consumption and wide applicability, die punching has been widely used in the shearing process of automotive parts. However, it is seldom used on ultra-high strength steel due to the high punching force and risk of tool wear. In this paper, study of die punching process for hot stamped steel Usibor 1500P has been carried out. Firstly, the influence of process parameters including punching velocity, die clearance, punch corner radius, sheet thickness, punch diameter and punch shape have been studied through a specifically designed punching tool. Corner radius at the punch edge can significantly improve the sheared edge quality, and tapered flat-bottomed punch and conical shaped punch evidently reduce and raise the maximum punching force respectively. Secondly, based on the damage thresholds obtained from “iterative prediction-correction” method, finite element fracture model for the die punching process of Usibor 1500P has been constructed and validated, the Oyane and MMC damage models are considered as the most suitable for describing the fracture characteristics of the Usibor 1500P during punching.
- Copyright
- © 2023 The Author(s)
- Open Access
- Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
Cite this article
TY - CONF AU - C. D. Yang AU - S. T. Huang AU - X. H. Han AU - Z. Chen AU - S. F. Qu PY - 2023 DA - 2023/03/02 TI - Research on the Influence of Punching Parameters and Selection of Fracture Damage Model for Punching BT - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022) PB - Atlantis Press SP - 266 EP - 271 SN - 2590-3217 UR - https://doi.org/10.2991/978-94-6463-114-2_36 DO - 10.2991/978-94-6463-114-2_36 ID - Yang2023 ER -