Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)

Influence of Precipitation Behavior of (Ti, Mo)C Carbides on the Microstructure and Mechanical Properties of Medium Manganese Steels

Authors
D. F. Xu1, 2, S. H. Sun1, 2, M. H. Cai1, 3, *
1School of Materials Science and Engineering, Northeastern University, Shenyang, 110819, China
2Key Lab of Lightweight Structural Materials, Northeastern University, Shenyang, 110819, China
3State Key Lab of Rolling and Automation, Northeastern University, Shenyang, 110819, China
*Corresponding author. Email: caimh@smm.neu.edu.cn
Corresponding Author
M. H. Cai
Available Online 2 March 2023.
DOI
10.2991/978-94-6463-114-2_16How to use a DOI?
Keywords
Medium manganese steel; Microalloying; Precipitation kinetics; Microstructural evolution; Mechanical properties
Abstract

Although the medium manganese steel has a high value of the product of tensile strength and elongation, it has the disadvantage of low yield strength. To solve this problem, two Fe-Mn-Al-C steels with (Ti, Mo) and without (Ti, Mo) were designed to analyze the effect of microalloy elements on their microstructure and mechanical properties. The steels were annealed at different temperatures for 24 h to obtain a stable microstructure close to equilibrium. The addition of Ti-Mo increased the yield strength by 150–300 MPa, and the maximum increment in yield strength was achieved at an intercritical annealing temperature of about 610 ℃. The increase in yield strength is mainly attributed to grain refinement and precipitation hardening with the addition of Ti-Mo.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
2 March 2023
ISBN
978-94-6463-114-2
ISSN
2590-3217
DOI
10.2991/978-94-6463-114-2_16How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - D. F. Xu
AU  - S. H. Sun
AU  - M. H. Cai
PY  - 2023
DA  - 2023/03/02
TI  - Influence of Precipitation Behavior of (Ti, Mo)C Carbides on the Microstructure and Mechanical Properties of Medium Manganese Steels
BT  - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
PB  - Atlantis Press
SP  - 118
EP  - 123
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-114-2_16
DO  - 10.2991/978-94-6463-114-2_16
ID  - Xu2023
ER  -