Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Ren, Dai
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Ren, Jing-Yao
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Ren, K.
- Photodegradation of Reactive Black BL-G by Anatase TiO2-graphene Nanocomposites
- Ren, Ya-Xuan
- Effect of Annealed Temperature on Microstructure and Magnetic Properties of Ag/Fe/Ag Nanogranular Films
- Ren, Zhong-Chao
- A Research on the Metal's Three-dimentional Plastic Flow Mechanism in Rail Universal Rolling
- Rui, Meng-Meng
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Rui, Yu-Kui
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Sarfarazi, V.
- Investigation of Micro Defect on the Shear Crack Growth Properties Using FRANC2D
- Shan, Mei-Di
- Brief Discussion on Application of Guided Boring Non-excavation Technology in Repair of Sewage Pipes
- Shan, Mei-Di
- Brief Discussion on Cause, Prevention and Control for Roof Leakage on Industrial Buildings
- Shan, Yu-Cai
- The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials
- Shang, Yun-Dong
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Shao, Chun-Fu
- Research on Multi-source Traffic Flow Data Fusion Based on Linear Regression: A Case Study in Mega-city
- Shao, Guo-Bing
- Research and Preparation of Mycelium-Soybean Straw Composite Materials
- Shao, Jie
- Crystal Plasticity Finite-Element Simulation of Ti-6Al-4V Alloy with 3D Polycrystalline Models
- Shen, Chuan
- Active LSP based structure for Holographic 3D Video Display
- Shen, Jing-Ling
- The Inspection of Wind Blades Using Thermography with Different Exciting Methods
- Shen, Zong-Bao
- Investigation of Weldability of Multi-layer Metals by Laser Impact Welding
- Shi, J.L.
- High Speed Milling of a Large Thin Sheet Copper Part with a Vacuum Fixture on a CNC Machine Tool
- Shi, Meng-Jie
- Numerical Simulation of Temperature Field in Single-crystal Growth by Optical Floating Zone Technique
- Shi, Wei-Min
- Study on Growth Conditions for High Quality Hydrogenated Amorphous Silicon Oxide Films
- Shi, Xiao-Bing
- An Equivalent Model of Corrugated Structures
- Shibraen, Mahmoud H. M. A
- Influence of Operational Parameters on Layer-by-layer Assembled Cellulose Derivatives Thin Film
- Song, Cheng-Cheng
- The Electrical Tree of Polyethylene Insulation Study Progress
- Song, Guang-Hui
- Insulation Breakdown Influence Factors and Development of Cross-linked Polyethylene Cable
- Song, Jie-Guang
- Influence of Loading Quantity on the Properties of Quartz Sand Powder via Mechanical Ball Milling Method
- Song, Li-Hua
- Analysis Combustion Gas Composition of Solid Waste
- Song, Shu-Peng
- Microwave-Assisted Synthesis of Ag/Cu Bimetallic Nanoparticles and Their Antibacterial Properties
- Song, Xiu-Duo
- Effect of Nano Combustion Modifier on Combustion Properties of DB and CMDB-propellant
- Song, Xu-Ding
- Fatigue Crack Propagation Rate of High Strength Steel's Welded Joints
- Song, Y.P.
- Application of Recycle Composites on Cold-rolled Ribbed Roller
- Song, Yong-Sheng
- Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
- Su, Xin
- The Influence of Carbon Fiber Heating Wire Spacing on Concrete Pavement Temperature
- Sun, H.S.
- Effect of Mo Content on the Microstructure and Mechanical Properties of TiC Steel Bonded Carbide
- Sun, Hai-Fang
- Real-time Surveillance System of Mechanical Specific Energy Applied in Drilling Parameters Optimization
- Sun, Hong
- The Preparation Method of Aluminum-magnesium Alloys
- Sun, Hui
- Numerical Analysis of Two-phase Flow and Heat Transfer in External Cyclic Purification Hot-dip Galvanizing Bath
- Sun, L.H.
- Effect of Mo Content on the Microstructure and Mechanical Properties of TiC Steel Bonded Carbide
- Sun, Li-Hua
- The Screening of PHB Secretion Strain of PHB Synthesis
- Sun, M.Z.
- The Research of Sound Absorption Performance on Micro-Perforated Panel Absorb-er
- Sun, Xiang-Wei
- Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
- Sun, Ya-Bing
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Sun, Ya-Guang
- The Impact of High-rise Building Curtain Wall Technology in the Exploring Period (1895-1959)
- Sun, Yong-Xing
- Real-time Surveillance System of Mechanical Specific Energy Applied in Drilling Parameters Optimization
- Tan, Cong-Cong
- Simulation of Heat Radiation for High-power LED Liquid Packaging
- Tan, Guang-Lei
- Calcite: Kinetics of Two-step Thermal Decomposition
- Tan, S.
- The Research Progress on Method of Preparation of Biomass Charcoal and Modification
- Tang, Bin
- Crystal Plasticity Finite-Element Simulation of Ti-6Al-4V Alloy with 3D Polycrystalline Models
- Tang, Bin
- The Influence of Surface Roughness on Diffusion Bonding of High Nb Containing TiAl Alloy
- Tang, Bin
- Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell
- Tang, Liang
- Development of a Heater Structure Based on ITO Films Deposited by RF Magnetron Sputtering for Chip-scale Atomic Clock
- Tang, Ren-Cheng
- Green Synthesis of Silver Nanoparticles with Antibacterial Activities Using Aqueous Eriobotrya Japonica Seed Extract
- Tang, Y.-L.
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
- Tang, Z.B.
- Dynamic Compressive Properties of 2D-C/SiC Composites under Low Temperature
- Taniguchi, Masaki
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Taniguchi, Masaki
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Tao, Ning-Ping
- Study for Rapid Determination of Tetrodotoxin Based on Lateral Flow Immunoassay
- Tian, Qi
- Test Study on Cube Compressive Strength of Recycled Lightweight Aggregate Concrete
- Tian, Yong-Jiang
- Effects of Laser Cladding on Thermal Tensile Property and Fracture of Gas Turbine Engine Blade Material GH864
- Tong, Sheng-Qiang
- Influence of Electrolyte Concentration on Photovoltaic Performance of DSSCs Based on TiO2 Nanotube Array
- Uchida, Shinichi
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Uchida, Shinichi
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Wan, Ling-Yu
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Wan, R.
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
- Wan, Tian
- Microwave-Assisted Synthesis of Ag/Cu Bimetallic Nanoparticles and Their Antibacterial Properties
- Wang, C.
- Study on Anti-scaling Performance of Scaling Inhibitor Used during Calcium Scaling Period of Oilwells in ASP Flooding
- Wang, Cai-Hua
- A Study on Effective Elastic Modulus of Nanocomposites
- Wang, Chao
- A Finite Element Method for Calculating the Pressure-drag Flow of Polymers Based on Computational Fluid Dynamics
- Wang, Chun-Ming
- High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
- Wang, Di
- Structure Stability and Growth Strategies of the (MgO)n (n=1-13) Clusters
- Wang, Di
- Calcite: Kinetics of Two-step Thermal Decomposition
- Wang, Fang
- Test Study on Cube Compressive Strength of Recycled Lightweight Aggregate Concrete
- Wang, Fang
- Influence of Loading Quantity on the Properties of Quartz Sand Powder via Mechanical Ball Milling Method
- Wang, Fei
- Growth of Aligned Carbon Nanotubes on Different Metal Substrates
- Wang, Fei
- Electrical Properties and Photo-response of FETs based on Few-layer WS2 Nanoflakes
- Wang, Fei
- Preparation and Characterization of Pineapple Leaf Nanocellulose by High Pressure Homogenization
- Wang, Feng
- The Austenite Grain Growth Behavior and Mathematical Model of 20CrMnTiH
- Wang, Feng
- Effect of In Situ TiB2 Particles on the Microstructure and Mechanical Properties of Spray deposited Zn-30Al-1Cu Alloy
- Wang, Feng
- Effect of Cu Additions on the Microstructure and Mechanical Properties of Spray Deposited Zn-30Al Alloy
- Wang, Fu
- Warning Index System of Multi-emergency Coupling on Cluster Analysis
- Wang, H.M.
- Transparent Conductive Thin Films of Aluminum-doped Zinc Oxide Prepared by Magnetron Sputtering
- Wang, Hao
- Active LSP based structure for Holographic 3D Video Display
- Wang, Hong-Bin
- Geometries, Stability and Growth Strategies of Small AlnCu (n=1-9) Clusters
- Wang, Hui-Ying
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Wang, Jian
- Programmable Thermocouple Transmitter with Compensation Function
- Wang, Li-Xin
- Coating Thickness Controlled by Different Protective Atmospheres for A Hot Dipped 0.7mm Thin Steel Slab
- Wang, Li-Xin
- The Effect of Air Knife Wiping Speed on Galvanized Coating Weight and Thickness
- Wang, Ming-Kun
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Wang, Neng-Wei
- Mn-Zn Ferrite Prepared by Sr2+ Doping
- Wang, Peng
- Test Study on Cube Compressive Strength of Recycled Lightweight Aggregate Concrete
- Wang, Peng-Yan
- The Preparation and Papain Immobilization of Novel Mesoporous SiO2/Fe3O4 Microspheres with Size-tunable Hollow Cavity
- Wang, Qi
- Calcite: Kinetics of Two-step Thermal Decomposition
- Wang, Qi-Fan
- Controllable Preparation and Electrochemical Behavior of Nanostructured Zn2GeO4
- Wang, Qian
- Phosphorus Adsorption Desorption Model of River Sediment
- Wang, Ren-Dong
- Structure and Mechanical Properties of (CrAl)N and (CrAlSiY)N Coatings Prepared by Asymmetrical Bipolar DC Magnetron Sputtering
- Wang, Rui
- Efficient Preparation of Diuridine P2, P3- (Dihalo) Methylenetetraphosphates
- Wang, Rui
- A Feature Extraction Algorithm of Damaged Military Area Based on Fuzzy Connectedness
- Wang, Su-Qing
- Synthesis of Spinal Mg1.5Mn0.25Ti0.5O3 by a Solid State Reaction Method and Study of Its Exchange for Li+
- Wang, Su-Qing
- Inorganic Ion Exchanger Mg1.5Ti1.25O4 and Its Ion-exchange Ability
- Wang, Su-Qing
- Study of Li+ Ion-exchanger Mg2TiO4