Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Ai, Li-Mei
- Preparation and Characterization of Silica Gels Catalysts Containing Undecatungstocobaltoindic Heteropoly Acid
- Anzai, Hiroaki
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Anzai, Hiroaki
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Arita, Masashi
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Arita, Masashi
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Bai, R.S.
- Experimental Study on Preparation of Mullite Decorative Materials
- Bi, Yong-Guang
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Bi, Yong-Guang
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Bi, Zhe
- Determination of Nickel and Iron Carbonyl in Carbon Monoxide by ICP-MS Methods and a Pyrex Gas Washing System
- Bian, Li-Chun
- A Micromechanics Model for Material Property of Composite
- Bian, Li-Chun
- A Study on Effective Elastic Modulus of Nanocomposites
- Cai, H.Q.
- Experimental Study on Preparation of Mullite Decorative Materials
- Cai, Liu-Lu
- Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
- Cai, Liu-Lu
- Process Mineralogy of Uranium Ore with High Fluorine
- Cao, Guo-Xuan
- A Novel High Strength Porous Hydroxyapatite/Silk Fibroin Composite: Preparation and Characterization
- Cao, Ji-Ping
- A Feature Extraction Algorithm of Damaged Military Area Based on Fuzzy Connectedness
- Cao, Jian-Bo
- Design of Novel Energy Recovery Damper Based on EAP
- Cao, Jian-Bo
- Design for the Multi-functional Floating Garbage Disposal Device
- Cao, Jian-Xia
- Design for the Multi-functional Floating Garbage Disposal Device
- Cao, Y.
- High Speed Milling of a Large Thin Sheet Copper Part with a Vacuum Fixture on a CNC Machine Tool
- Cao, Yi-Jun
- Effect of Ambient Temperature on Solid Motor Grain in Shipboard Multi-launch Container
- Chai, Le-Hao
- Growth of Aligned Carbon Nanotubes on Different Metal Substrates
- Chang, Cheng-Gong
- Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
- Chang, Y.P.
- Study on Impact Wear Properties of the Surface Composites Reinforced by Particles
- Chen, An
- Fatigue Behavior of 2198-T8 Aluminum-lithium Alloy with Riveted Lap Joints
- Chen, Chen
- PMMA Lens Design and Manufacturing for Indoor Uniform Illumination
- Chen, Da-Peng
- Study of under Coating Recognition by Pulse Thermography
- Chen, Da-Peng
- The Inspection of Wind Blades Using Thermography with Different Exciting Methods
- Chen, Guo-Qiang
- Flame Retardant Finish of Silk Fabric with Dimethyl Phosphonate Doped Silica Sol
- Chen, Guo-Qiang
- Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
- Chen, J.
- Effects of Probiotics Diet Fed Myxcobacteria (JCH-04) on Survival, Growth, Digestive Enzymes Activities and Aquatic Environment in Grass Carp (Ctenopharyngodon idellus)
- Chen, Jun
- Study for Rapid Determination of Tetrodotoxin Based on Lateral Flow Immunoassay
- Chen, Kai
- Preparation of Superhydrophobic ZnO Surface Derived from Wood Template
- Chen, Le
- Elastic properties and Debye Temperature of Tetragonal and Cubic Ga3Zr under High Pressure: A First-Principles Investigation
- Chen, Ling
- Finite Element Analysis of Structural Dynamic Testing of Composite Quick-Install Scaffold
- Chen, Mi-Mi
- Preparation of Activated Carbon from Waste Penicillin Mycelium
- Chen, Ran
- The Electrical Tree of Polyethylene Insulation Study Progress
- Chen, Rui-Xue
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Chen, W.
- Effect of Mo Content on the Microstructure and Mechanical Properties of TiC Steel Bonded Carbide
- Chen, X.X.
- Synthesis of Monolayer MoS2 by CVD Approach
- Chen, Xue-Wei
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Chen, Xue-Wei
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Chen, Y.
- Elastic Constants and Properties of B2-type FeAl and Fe–Cr–Al Alloys from First-Principles Calculations
- Chen, Yan-Hua
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Chen, Yong
- Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
- Chen, Yu-Xi
- Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
- Chen, Yun-Bo
- Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
- Chen, Yun-Gui
- High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
- Chen, Yun-Gui
- A Solid-State Metal Hydride/Oxygen Cell using La0.78Ce0.22Ni3.73Mn0.30Al0.17Fe0.50Co0.30 in the Anodeand Nafion as Electrolyte
- Chen, Zhen-Qiang
- Effect of Geometric Error of Bearing Parts on the Radial Runout of Rolling Bearing
- Chen, Zhi-Qian
- Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
- Chen, Zong-Yong
- An Equivalent Model of Corrugated Structures
- Cheng, H
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
- Cheng, Hong-Wei
- Effect of Preparation Method on the Performance of 10Ni/MgAl2O4 for Dry Reforming of Coke Oven Gas
- Cheng, Jie-Jie
- Influence of Electrolyte Concentration on Photovoltaic Performance of DSSCs Based on TiO2 Nanotube Array
- Cheng, Jun-Feng
- Experimental Study on a Novel Solar Watering Tube for Producing Water from the Air
- Cheng, Jun-Hong
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Cheng, L.D.
- Risk Assessment of Bisphenol A (BPA) in Thermochromic Textiles
- Cheng, Nan-Pu
- Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
- Cheng, Peng
- High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
- Cheng, Shi-Hong
- Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
- Cheng, Wang-Jun
- Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
- Chi, Cheng-Zhong
- Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
- Cong, Jian
- Study for Rapid Determination of Tetrodotoxin Based on Lateral Flow Immunoassay
- Cong, Ri-Jie
- The Austenite Grain Growth Behavior and Mathematical Model of 20CrMnTiH
- Cui, Jian-Ying
- Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
- Cui, Li-Hong
- Preparation and Characterization of Pineapple Leaf Nanocellulose by High Pressure Homogenization
- Cui, Mi-Dou
- High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
- Cui, Zhi-Ming
- High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
- Dai, Xu
- A Solid-State Metal Hydride/Oxygen Cell using La0.78Ce0.22Ni3.73Mn0.30Al0.17Fe0.50Co0.30 in the Anodeand Nafion as Electrolyte
- Deng, Cheng-Ji
- Effects of Powder Characteristics on Rheological Properties of Alumina Slurries
- Deng, Jian-Hong
- Reactivity and Kinetic Analysis of Coal Chars Combustion under Oxy-fuel Conditions
- Deng, Ming-Rong
- Test Study on Cube Compressive Strength of Recycled Lightweight Aggregate Concrete
- Deng, Ming-Xiang
- The Two-scale Asymptotic Expansion for One Class of Thermoelastic Problem in Periodic Composite with Boundary Layer
- Deng, Peng
- Microstructure and Wear Behavior of in situ TiB2/2024 Composite Fabricated by Spray Deposition Technique
- Deng, Q.
- Dynamic Compressive Properties of 2D-C/SiC Composites under Low Temperature
- Deng, Shi-Ting
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Deng, Shi-Ting
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Deng, Wei
- Effects of the Amount and Introducing time of Emulsifier on the Preparation of Carboxylated Polystyrene Particles
- Deng, Wen-Wen
- Analysis of Disc Wear Based on Trajectory Simulation in Lapping Process
- Deng, Xiao-Jun
- The Two-scale Asymptotic Expansion for One Class of Thermoelastic Problem in Periodic Composite with Boundary Layer
- Deng, Yu
- Preparation of Thermosetting Polystyrene Insulation Board
- Deng, Yu-Lin
- Aptamer Based Microfluidic Chip for Microbial Detection
- Di, Qi
- Structure Stability and Growth Strategies of the (MgO)n (n=1-13) Clusters
- Di, Yu-Xian
- Break Impact Influence Factor of Tension Composite Insulator String
- Ding, J.
- Synthesis of Monolayer MoS2 by CVD Approach
- Ding, Wu-Cheng
- High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
- Ding, Xiu-Juan
- Technology Research on the Waterproofness and Alkali Resistance of Silane Coupling Agent Modified Fiber Glass Board
- Ding, Xiu-Juan
- The Performance Study of Modified Glass Wool Board External Thermal Insulation System and the Application in the Energy-efficient Construction in Existing Building
- Ding, Xiu-Juan
- Mechanical Properties of Phenolic Foam Modified Insulation Board by Urethane Oligomer
- Ding, Xiu-Juan
- Preparation of Thermosetting Polystyrene Insulation Board
- Dong, An-Ping
- Numerical Analysis of Two-phase Flow and Heat Transfer in External Cyclic Purification Hot-dip Galvanizing Bath
- Dong, Deng-Ke
- Fatigue Behavior of 2198-T8 Aluminum-lithium Alloy with Riveted Lap Joints
- Dong, Jin-Mei
- Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
- Dong, T-W
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
- Dong, Xue-Wu
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Dong, Yong-Gang
- A Research on the Metal's Three-dimentional Plastic Flow Mechanism in Rail Universal Rolling
- Dou, Qiang
- Effect of Particle Size of -nucleating Agent on the Crystallization and Mechanical Properties of Isotactic Polypropylene
- Du, Jie
- Mechanical Structure Design of Stress-generating System of Low-frequency Mechanical Spectrum Apparatus
- Du, Xiao-Feng
- Coating Thickness Controlled by Different Protective Atmospheres for A Hot Dipped 0.7mm Thin Steel Slab