Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)

Study on Impact Wear Properties of the Surface Composites Reinforced by Particles

Authors
L.X. Jia, Y.P. Chang, X.Z. Wang
Corresponding Author
L.X. Jia
Available Online June 2016.
DOI
10.2991/ame-16.2016.18How to use a DOI?
Keywords
Surface composites, Traditional cast processing, Impact wear, Dynamic load abrasive Wear testing machine, Microhardness, Wear mechanism
Abstract

Six kinds of surface composite with different ingredients had been prepared on steel matrix by traditional cast processing. Impact wear properties of the prepared composites had also been studied by dynamic load abrasive wear testing machine with type of MLD-10. Results indicated the following four points. Firstly, composite layers on the casting bonded with matrix metallurgically. Secondly, hardness values of the composites increased firstly and then decreased gradually to the same value of the matrix in the direction perpendicular to the surface. Thirdly, the impact wear rate of the prepared composites decreased firstly and then increased with the increase of the high-carbon chromium iron content in reinforcements, reduced with the increase of the tungsten carbides content in reinforcements, enlarged firstly and then shrunk with the increased of impact energy. Finally, Wear mechanism of the prepared surface composites was mainly composed of plastic deformation and flaking off under the condition of impact wear.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
Series
Advances in Engineering Research
Publication Date
June 2016
ISBN
978-94-6252-208-4
ISSN
2352-5401
DOI
10.2991/ame-16.2016.18How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - L.X. Jia
AU  - Y.P. Chang
AU  - X.Z. Wang
PY  - 2016/06
DA  - 2016/06
TI  - Study on Impact Wear Properties of the Surface Composites Reinforced by Particles
BT  - Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
PB  - Atlantis Press
SP  - 105
EP  - 112
SN  - 2352-5401
UR  - https://doi.org/10.2991/ame-16.2016.18
DO  - 10.2991/ame-16.2016.18
ID  - Jia2016/06
ER  -