Proceedings of the 2016 2nd International Conference on Advances in Energy, Environment and Chemical Engineering (AEECE 2016)

+ Advanced search
79 articles

Effects of C Element on Microstructure and Mechanical Behavior of AlCrFeMnNi High-entropy Alloy

Chunming Li, Bilei Wang, Yunhu Zhang, Changjiang Song, Qijie Zhai
The AlCrFeMnNiCx (x values in molar ratio, x = 0, 0.08, 0.17 and 0.25) were designed and prepared by adding nonmetallic carbon element into the high entropy alloy under near-rapid solidification conditions. The effects of carbon content and heat treatment on microstructure and mechanical properties of...

Separation and Purification of Three Main Lignans from the Anti-Inflammatory Extract of Lllicium Difengpi by High-Speed Counter-Current Chromatography

Desheng Ning, Yixia Fu, Zhenghong Pan
Based on the principle of partition coefficient values ( ) for target compounds and the separation factor ( ) between target compounds, the optimal two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (1:0.3:1:0.2, v/v) was applied for the first time to isolate and purify three...

Design of Terahertz Waveband Antenna Based on Fractal Photonic Crystal Structure

Bin Lin, Chang Lin, Yunhai Mao, Zhihang Chen, Peitao Zhang, Yuankun Cai, Guangya Ye, Yu Zhang
In terms of the performance requirements of Terahertz waveband antenna on Terahertz devices, the present paper originally combines Cantor fractal structure, photonic crystal structure and Terahertz waveband wave-transmitting ceramic substrate, designing a Terahertz waveband antenna based on fractal photonic...

Effects of Exogenous Melatonin on Photosynthesis of Chinese Cabbage Seedlings under NaCl Stress

Yi Tang, Renheng Lin, Jingyu Lan, Huanxiu Li
A pot experiment was conducted to study the effects of spraying melatonin (MT) on photosynthesis of Chinese cabbage seedlings under NaCl stress. The result showed that net photosynthetic rate (Pn), stomatal conductance (Gs), water use efficiency (WUE), light use efficiency (LUE) and transpiration rate...

Effects of Abscisic Acid on Photosynthetic Characteristics of Radish under Aluminum Stress

Xuena Yu, Jun Tan, Yi Tang
A pot experiment was conducted to study the effects of exogenous abscisic acid (ABA) on photosynthetic characteristics of radish under aluminum (Al) stress. Five treatments were used in the experiment: seeds were soaked with 0 (CK), 1, 5, 10 and 20 mol-L-1 concentrations of abscisic acid solution. The...

On Gasohol Production by Extracting Alcohol with Gasoline

Sinjhang Huang, Tzongbin Lin, Mawtien Lee
In this research we explore the feasibility of using commercial gasoline to extract the ethanol from the ethanol solution to produce gasohol. The experiment simulated a 3-stage countercurrent extraction process. Commercial unleaded gasoline with various octane number (92,95,98) was used as solvent to...

Effects of Paclobutrazol on Cadmium Accumulation of Stellaria Media

Jiajing Huang, Lijin Lin, Lei Yuan, Ming'an Liao
The effects of paclobutrazol (PP333) on cadmium (Cd) accumulation of Stellaria media were investigated through a pot experiment. The results showed that the root biomass increased with the increase of PP333 concentrations, but the shoot biomass and total biomass decreased. PP333 enhanced the photosynthetic...

Automatic Detection of Chinese Transcription of English Personal Names based on Regular Expression Matching of Consonant Clusters

Wenxin Xiong
Automatic detection of the transcription of personal names in different languages is a key component for cross-lingual information retrieval systems. A plenty of complex machine learning algorithms have been employed in machine transliteration tasks with considerable computational costs. We propose an...

A Vehicle Target Searching Method

Yong Sun, Wenwei Li, Tiezheng Liu, Jirong Xue
Based on some assuming and definition, this paper propose a method of vehicle target searching, this method include calculate the scanning time, the probability of finding the target when the target intersection with the sight center line, and the probability of finding a target within a time interval,...

Analysis of The Economic Operation of Micro Grid Considering Forecasting Error

Yuanyuan Rong, Xiaohe Liu, Rong Ju, Yong Ju, Xinying Ji
Energy optimization plan is necessary to ensure the safety, the stability and the economy of the power dispatch. The most common method of energy optimization plan is the day-ahead dynamic economic dispatch by the short-term forecast. However, due to the forecasting error of the distributed generation,...

Analysis of the Influence Factors of College Students Employment Based on the Interpretative Structural Model

Ziyu Liu, Xiaomin Shen
Aimed at the problem of low employment rate of college students, we establish the evaluation index system of university students' employment in this paper. Then we use the practical method of interpretative structural model to analyze the influence factors of university students' employment, and explain...

A Parameteric Conjugate Gradient Methods for Large Scale Problem

Mingjuan Ma, Yongpo Zhang, Jiahui Sun, Huiyu Mao
In this paper, we give out a Parameter. By this Parameter,we get a series of conjugate gradient methods. We give the Algorithm of the Parameteric conjugate gradient. The efficiency of the method can be got by the numerical result of the examples .

A Full-Frequency Band Matching Structure of Double-Ridge Magic T

Chao Yuan, Yi Luo, Fanfu Meng, Guowei Chen
In this paper, a broadband impedance matching structure is presented. Based on it, a high-power double-ridged waveguide magic T covering the full-band of WRD 750 (7.5~18GHz) is designed. The test results are: each port's return loss below -18dB, synthetic branches amplitude balance error is less than...

A Capacitive Load Double-Ridge Waveguide Evanescent Mode Low-pass Filter

Fanfu Meng, Chao Yuan, Guowei Chen
In this paper, a capacitive load double-ridge waveguide evanescent mode low-pass filteris is presented. Combining electromagnetic simulation software to design ,the test results are: The filter return loss<-20dB, insertion loss>-0.6dB, out-band suppression 40dBc at 5.5GHz and 20dBc at 13GHz to 26 GHz,...

The Applications of Biodegradable Polymers on Soil and Water Conservation Engineering

Chunku Lu, Lianghsing Chou
Polyacrylamide (PAM), a biodegradable polymer, has been used in irrigating ditch to reduce soil loss for a long time. It can also be used as an aggregate agent to keep the balance of soil and water. The performance of PAM as a soil aggregate agent of silty clay loams was conducted by the wet-sieving...

The Tectonic Background of Basement Metamorphic Rocks and Its Relationship to Uranium Source Layer, Xiangshan Uranium Ore Field

Xiaoliang Zhang, Qingkun Yang, Yang Zeng, Hongjian Qu, Wanpeng Zhou, Zehuang Rao
The geochemistry of metamorphic sedimentary rocks from Qingbaikou system in Xiangshan area indicate that : the Al2O3/ SiO2 is 0.13~0.23, equal to or slightly lower than the standard greywacke. In" REE/10-6-La/Yb" diagram, the investment point is in Sandy Rock and greywacke range, indicating that the...

Determination of Microelements and Nutrition Ingredients of Jianghong Yulu

Ningli Qi, Xiao Gong, Xiaoli Yuan, Chunliang Yang
In this paper, our helpfully microelements to human body, including Ca, Cu, Fe and Zn in Jianghong yulu are determined by FAAS. Besides, the nutrition ingredients such as moisture content, body fat, total sugar and protein are also analyzed. The proposed analytical procedure is also quick, convenient...

Study on the Electromagnetic Properties in Low Frequency of the Mechanical Modified Carbonyl Iron

Ze Li, Baocai Xu, Jianjiang Wang, Xudong Cai, Haitao Gao
In order to obtain a high permeability and improve the microwave absorption properties in low frequency, this paper applied high-energy ball milling technology prepared flaky carbonyl iron powders (CIPs) with high permeability, and studied the Influence of milling time on the morphology, structure, impedance...

Control Mechanism of Aeroelastic System based on Piezoelectric Actuator

Jie Sun, Min Li
Mechanism of aeroelastic control is more complicated than that of vibration control based on piezoelectric material, and analyzing the control mechanism is of great significance for the research of aeroelastic control. The macro fiber composite (MFC) actuator is modeled by the load simulation method....

Enhanced Microwave Absorption at Low Frequency of Superparamagnetic Fe3O4 Single Nano-crystals

ZongJie Yin, YuHui Du, Lin Yang
The superparamagnetic Fe3O4 single nanocrystals with diameters of 10-15 nm have been synthesized via a simple method. Several characterizations such as SEM, TEM and XRD are used to obtain the morphology and crystallinity of Fe3O4 nanoparticles. The investigation about wave absorption property indicates...

Impulsive Control and Synchronization of Time-delay Chaotic System

Yan Yan, Zhanji Gui, Kaihua Wang
With the increasingly perfecting and development of chaos theory, this paper considers the impulsive control and synchronization under the influence of time-delay chaotic system. It will utilize Lyapunov-krasovskii function and linear matrix inequality to research the asymptotic stability of chaotic...

Design Preservation Methodology based on FPGA

Bin Bao, Xuenan Cui, Ning Lei
More and more (Field Programmable Gate Arrays)FPGAs were used in space missions, due to the characteristics of aerospace equipment ,such as satellite. The correctness of FPGA design was not only determined by the code, but also need FPGA design suite to complete the process which generates the circuit,...

The Establishment of Blouse'S Parameter Constraint Database Based on Pattern Automatic Generation

Lina Cui
This study takes fast pattern generating as the goal and takes blouse pattern as the research ob-ject, then raises up the parametric design method based on numerical geometric constraint, and take constraint solving for each part of the blouse pattern, furthermore, this paper uses numerical method of...

Research on the Assembly Process of Spindle System of Precision Lathe

Z.X. Wang, Y. Zhang, Z.S. Li
The spindle system of precision lathe is one of the main parts of CNC lathe, and also a executive part of the main motion of the machine tool, it directly clamping the work piece and drive it to rotate.And the running accuracy directly relate to assembly accuracy.Through the corresponding assembly process...

An Analysis of the Production Efficiency of Large Coal Enterprises in China and its Enlightenment to the Enterprises in Mongolia

Rigaqiqige Wu, Zhanxin Ma, Min Nuo
Because of the advantage of geographical location between China and Mongolia, and the advantage of industrial structure and exchange space, China and Mongolia's trade development prospects are wide. Therefore, this paper chooses the data of China's 15 major coal listed companies from 2009 to 2014 to...

Effects of Cadmium Stress on Photosynthetic Characteristics of Grape Seedlings

Lijin Lin, Lei Yuan, Li Wang, Ming'an Liao
The effects of cadmium (Cd) stress on photosynthetic characteristics of grape seedlings were investigated through a pot experiment. The results showed that with the increase of Cd concentrations, the photosynthetic pigment content and net photosynthetic rate decreased. The transpiration rate, CO2 concentration...

Influence of Ethanol-ferric Chloride Pretreatment on Straw Enzymatic Saccharification

Wei Chen
Since sufficient raw material supply and renewable energy development demand are available, fuel ethanol made of lignocellulose has very broad prospects for development. In the paper, straw is regarded as research object to study the influence factor of organic solvent pretreatment on straw enzymatic...

The Governance Measures of Bubble Problems in Concrete Members of Slope

Baochu Yu, Jiasong Wang, Rongyang Sun, Wenjian Dong
Nowadays, concrete has become the most widely used building materials in civil works. The members made of concrete can meet requirements of strength, stiffness and other with regard to the safety of the structure. However, in some high-quality engineering, the bubbles on concrete surface, especially...

Adsorptive Removal of Sulfamerazine from Water by modified Cellulose Nanofibers Aerogel

Qiufang Yao, Bitao Fan, Ye Xiong, Chao Wang, Qingfeng Sun
Using a chemical-ultrasonic process, a modified cellulose nanofibers aerogel, graphene oxide/cellulose nanofibers aerogel (GO/CNF) aerogel, was prepared, which was applied to adsorptive removal of sulfamerazine from water. The SEM, XRD and FTIR were used to characterize the GO/CNF. The as-prepared GO/CNF...

Basalt Fiber on Cinder Strength of Lightweight Aggregate Concrete

Liguang Xiao, Qingshun Liu, Jiheng Li
Lightweight aggregate concrete has a lot of excellent properties such as light weight, high strength, heat preservation, heat insulation, fire proof, antifreeze, earthquake, and is resistant to chemical cor-rosion. It is a high-rise buildings which has frame structure, large-span, soft soil foundation,...

The Test and Vector Extension Model of the Vessel Static Electric Field

Xiangjun Wang, Fang He
The continuation of the static electric field is based on the electric field scalar potential or the three component of the electric field, and the calculation process is complex. According to the vector Green formula, the static electric field vector continuation model is established based on the integral...

The Adaptive Spelling Error Checking Algorithm based on Trie Tree

Yongbing Xu, Junyi Wang
In many applications, the function of spelling error checking and auto-complete according to the user's input is very popular. The spelling error checking algorithm based on the dictionary is very fast to find the word written correctly, but need to recalculate the edit distance of a large number of...

Enhancing Dependence Representation of Clinical Variables based on Bayesian Networks to Assist in Thyroid Disease Diagnosis and Treatment

Fangyuan Cao, Limin Wang
In the past few decades, a large number of data mining algorithms have been proposed to assist in the practical medical diagnosis. This paper proposes a novel algorithm, k-dependence causal forest (KCF) based on Bayesian network. The experiments conducted on the thyroid disease data set suggest the KCF...

The Analysis of E-plane Metal Lens in Beam Forming

Yucheng Jiao, Jin Pan, Zhaonan Jin, Guoan Xiong
In communication system, for the different application, it's need antenna provide different pattern, such as cosecant squared pattern, The antenna with cosecant square pattern can rapidly find object, and cover the larger effective region, so the antenna which have cosecant squared pattern is widely...

Analysis of Heat Transfer Influence Factors in the Equipment System

Xin Ren, Li Ma
In this paper, the transient model of heat transfer is established based on the two fluid model and the non-steady state heat conduction model of solid wall. The additional acceleration model is introduced in order to study the influence of flow channel shape and motion on the boiling flow and heat transfer...

Lignin as a Fortifier for the Synthesis of Cellulose Composite Aerogel with Strong Mechanical Performance

Chao Wang, Bitao Fan, Qiufang Yao, Ye Xiong, Chunde Jin, Qingfeng Sun
The cellulose composite aerogels that were both high porosity and strong mechanical performance would have promising implications for bioengineering field; however, creating this aerogels had a challenge to choose compatible fortifier. Here we reported lignin as a reinforcement element to synthesis the...

Temperature-dependent Structure and Photocatalytic Performance of TiO2-based Cellulose Surface

Huanhuan Zheng, Qingfeng Sun, Qiufang Yao, Bitao Fan, Chao Wang, Ye Xiong, Chunde Jin
Inorganic particles were successfully grown on cellulose surface using a mixture solution of boric acid and titanium ammonium fluoride by hydrothermal method. The synthesis was performed in a sealed atmosphere under optimized conditions, at temperatures between 50 øC and 130 øC. Scanning electron microscope...

Optimal Configuration PV System Grid Connection based on the Minimum Transmission Loss

Bo Hu, Yandong Huo, Dan Guo, Yan Geng
This paper integrates the binary search algorithm and the load flow calculation to find the position and the injection capacity of the PV grid-connected injection node, it bases on minimizing the transmission loss and enhancing the voltage of the end. As verified by the IEEE33 node distribution system,...

Rapid Recognition System of Circuit Breaker Status Based on Wavelet Packet Decomposition and SVM

Jin Tan, Yao Wei, Mengyuan He
For circuit breaker failure state is difficult to identify quickly, this paper put forward a rapid recognition method of circuit breaker status based on wavelet packet decomposition and Support Vector Machine(SVM). After db3 wavelet packet decomposition, the extracted circuit breaker vibration signal...

Research of High Voltage Circuit Breaker Test Method Based on Multiple Data Fusion

Shi Liu, Jin Tan, Mengyuan He, Sun Cai
This paper proposes a new type of circuit breaker mechanical characteristic test method, which breaks through the former "contact" sensing technology. It adopts the technique of multi-data fusion, combines with electrical, sound and vibration, and studies the circuit breaker mechanical characteristics...

Parameter Setting Method of Fractional Order PI D Controller Based on Bode's Ideal Transfer Function and its Application in Buck Converter

Yiwen He, Zhen Li
The Bode's ideal transfer function is applied to the parameter setting of fractional order PI D controller in this paper. The closed loop system composed of Bode's ideal transfer is used to be a reference model in this optimized system, where the controller parameters are searched by genetic algorithm...

The Design and Implementation of the Wireless Network Identity Authentication System based on the Hybrid Encryption Algorithm

Yongbing Xu, Junyi Wang
Wi-Fi is a combination of the computer network and wireless communication technology. It uses wireless channel to access networks. With its characteristics of high speed,flexible,easy to manage and extension,etc,it has quickly become one of the most effective way of broadband access. But it was also...

A Structure of Cross Polarization Inhibition for Narrow Wall Slot Waveguide Antenna

Zhaonan Jin, Jin Pan, Yucheng Jiao, Guoan Xiong
As a kind of array antenna, narrow wall slot waveguide antenna can get desired far field pattern, by controlling the depth and inclined angle of every slot. This antenna is a linear polarized antenna with severe cross polarization which can increase sidelobe, and this cross polarization can't be eliminated...

Application Of High-Resolution Remote Sensing Images In Road Extraction

Huan Liu, Zhen Yan
High-resolution remote sensing images includes high spectral resolution remote sensing images, high spatial resolution remote sensing images, high temporal resolution remote sensing images and so on. Based on the physical properties and functions, there are six road features: spectral feature, textural...

The Development of Epoxy Foam Resin Grinding Wheel

Jiaoli Liang, Shuiyuan Shao
In this study,grafting modification silicon carbide powders were manufactured successfully by KH-550 and acrylamide monomer in nitrogen atmosphere, and the modified silicon carbide epoxy foam resin grinding wheels were prepared by mixing epoxy resin with silicon carbides. The structure of the modified...

The Compliance Analysis on Transaction Risk of Electricity Market Based on the Release of Retail Side

Tianqi Tang, Jianhua Yang
With the new development of electricity reform, many problems that involving the release of retail side need to be solved, which makes the compliance risk management very crucial. Compliance risk management is a kind of management theory that can proactively identify and manage the compliance risks that...

Study on the Soil and Plant Community Characteristics at an Early Ecological Restoration Stage in an Abandoned Quarry

Qiong Wang, Zaiyuan Gu, Lianbi Zhou
Taking an abandoned quarry located in Chengang town of Zhoushan city as an example and on the basis of investigating into vegetation and soil condition, the physicochemical properties of soil and plant community characteristics are analyzed. The results indicate: the physicochemical properties of the...

Effects of Exogenous Indole-3-Acetic Acid on Photosynthesis of Chinese cabbage Seedlings under NaCl Stress

Yongdong Xie, Xuena Yu, Jing Yan, Yi Tang
A pot experiment was conducted to study the effects of exogenous indole-3-acetic acid (IAA) on photosynthesis of Chinese cabbage under NaCl stress. Four treatments were used in the experiment: leaves were sprayed with 50, 100, 150 and 200 mol-L-1 concentrations of IAA solution, and by spraying water...

The Study of Vorticity Distribution Law Inside the Oxy-fuel Furnace based on FDS Direct Numerical Simulation

Yongfu Wu, Meng Feng, Liangliang Li, Zhongxing Liu
Carrying on numerical calculation for oxy-fuel furnace gas movement under different speeds spout by using FDS direct numerical simulation software module. And analyzing the influence of different nozzle gas velocity on the velocity field and vorticity field distribution in the furnace under the condition...

Anti-fatigue Properties of Icariin Isolated from Epimedium Brevicornum Maxim in Mice

Changjun Li, Ang Li
Aim of the present study was to evaluate the anti-fatigue properties of icariin in mice. The animals were divided into four groups, namely the control, low-dose icariin treated, medium-dose icariin treated, and high-dose icariin treated groups, which received distilled water and 5, 10 and 20 mg/kg icariin,...