Proceedings of the 2015 International Conference on Structural, Mechanical and Material Engineering

186 authors
Alonso Guzman, E.M.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Alonso Guzman, E.M.
Recycled concrete, a solution for fine and coarse raw material for new concrete
Alonso Guzman, E.M.
Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
Bai, Jie
Finite-element mode for parametric Analysis of wood frame shear walls
Bao, Xuewen
A study of construction management of seismic isolation retrofit
Bedolla Arroyo, J.A.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Betsofen, S. Ya.
Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
Bozhko, S.A.
Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
Cai, Huxiang
Research and application of harmonic drive in mechanical system
Cai, ShaoBiao
Interfacial Adhesion due to Liquid Mediated Contact of Hydrophilic Solid Surfaces
Cha, Giwook
A Study on Asbestos Slate Buildings in Rural Areas of Korea
Cha, Giwook
A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
Chang, Shuiping
Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
Chang, Shuiping
The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
Chang, Yifeng
Technological Innovation of Unpowered Operational Gearing
Chang, Yifeng
The Stripping Technique of Glued Cellophane Tape Mechanics Design and The Numerical Study on the Flow Field of analysis
Chavez Garcia, H.L.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Chavez Garcia, H.L.
Recycled concrete, a solution for fine and coarse raw material for new concrete
Chavez Garcia, H.L.
Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
Chen, Y.
Pop-in characteristic induced by nanoindentation in ZrB2-SiC composites
Chen, Bin
A Blur Restoration Research on Sequential Images of Bullets Taken in the Penetration Test
Chen, Wante
The Stripping Technique of Glued Cellophane Tape Mechanics Design and The Numerical Study on the Flow Field of analysis
Chen, Dongfeng
Residual stress analysis on titanium alloy TC4 by LSP
Cheng, Jing
Research and application of harmonic drive in mechanical system
Constantin, Draghici
Statistical modelling of the spring back behavior for bending of v-shaped parts from common sheet metal
Dai, Beibei
Investigating the growth mechanism and photocatalytic properties of TiO2/Bacterial Cellulose hybrid materials
Dai, Peng
Investigation of Apparent Diseases of Urban Bridges in Shijiazhuang
Dhital, Prabin
Interfacial Adhesion due to Liquid Mediated Contact of Hydrophilic Solid Surfaces
Du, Xuchu
Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
Du, Minshu
Rapid Characterization of Hydrogen Evolution Electrocatalyst Spot Arrays by the Pulsed-Potential Substrate Generation/Tip Collection Mode of Scanning Electrochemical Microscopy
Duan, Pengcheng
Finite-element mode for parametric Analysis of wood frame shear walls
Eduard, Golubchik
Adaptive Approach to Structure And Properties Forming in Niobium Alloyed Pipe Steels
Eva, Rykalova
Evaluation of selected variants of claddings on the basis of CO2 production and energy intensity of production of building materials
Fan, Zhenzhong
Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
Flores Lica, O.R.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Gao, X.M.
Loess cave dwelling under the conditions of heavy rain destruction form and prevention measures
Gong, Wenjie
Magnetocaloric properties in the PrFe2Ge2 antiferromgnet
Gonzalez Valdez, F.M.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Gonzalez Valdez, F.M.
Recycled concrete, a solution for fine and coarse raw material for new concrete
Gonzalez Valdez, F.M.
Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
Gurenko, Boris
A hydrodynamic calculation procedure for UV using CFD
Han, Zhihong
Rheology analysis of multiphase flow and its modeling
Hana, Sevcikova
Evaluation of selected variants of claddings on the basis of CO2 production and energy intensity of production of building materials
Hana, Zhihong
Study of the method during Micro- EDM Process
Hao, Zhenli
Numerical analysis of rainfall saturated-unsaturated seepage and stability of expansive soil slope with fissures
Hao, Huimin
A Study on the strengthening reconstruction plans of hyperbolic arch bridge
He, XianQi
Geometrical nonlinear analysis for multi-parameters of four tower cable-stayed bridge based on the bar element model
He, Yuhong
A Study on the strengthening reconstruction plans of hyperbolic arch bridge
Heng, ZionHui
Geometrical nonlinear analysis for multi-parameters of four tower cable-stayed bridge based on the bar element model
Hernandez Barrios, H.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Hernandez Barrios, H.
Recycled concrete, a solution for fine and coarse raw material for new concrete
Hernandez Barrios, H.
Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
Hong, Wonhwa
A Study on Asbestos Slate Buildings in Rural Areas of Korea
Hong, Wonhwa
A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
Hou, Dinggui
Numerical analysis of rainfall saturated-unsaturated seepage and stability of expansive soil slope with fissures
Hu, Mingyong
Theoretical calculation of stiffness of composite laminated beam with T-section
Hu, Rui
Residual stress analysis on titanium alloy TC4 by LSP
Huang, Li
Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
Huang, Yongmei
Research and application of harmonic drive in mechanical system
Huang, Weitai
Optimization of Process Parameters in Plastic Injection Mold Simulation for Auto Lock-Parts using Taguchi-Grey Method Based on Multi-Objective
Ivana, Lanikova
Probability-Based Design and Life Cycle Assessment of a Spun Concrete Pole
Ivanov, M.B.
Investigations of the thermal stability of the submicrocrystalline titanium
Jian, Wang
Investigation on the Oxides Morphology of Fe-Based Amorphous Ribbons
Jiang, Honggang
Engine isolate mount elastomers
Jiang, Guomin
Investigating the growth mechanism and photocatalytic properties of TiO2/Bacterial Cellulose hybrid materials
Jin, X.
Study of Fractography and Overaging in Ly12 alloy
Jin, Xiang
Research of Electro-Optics Characteristics of Polymer Dispersed Liquid Crystals Doped with Thulium Oxide Nanoparticles Gd2O3 in UV Based on Numerical Fitting
Khan, W.Q.
Study of Fractography and Overaging in Ly12 alloy
Kim, Taewoo
A Study on Asbestos Slate Buildings in Rural Areas of Korea
Kolobov, Yu.R.
Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
Kostukov, Vladimir
A hydrodynamic calculation procedure for UV using CFD
Kulchenko, Artem
A hydrodynamic calculation procedure for UV using CFD
Kunla, N.
Changes in natural torsional frequency of horizontally-curved bridge by reinforcement
Lai, Liangqing
Engine isolate mount elastomers
Lara Gomez, C.
Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
Lara Gomez, C.
Recycled concrete, a solution for fine and coarse raw material for new concrete
Lara Gomez, C.
Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
Lee, YiChao
Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
Lee, Chihsheng
Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
Lee, YiChao
The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
Lee, Chihsheng
The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
Lee, Kangguk
A Study on Asbestos Slate Buildings in Rural Areas of Korea
Lee, Kangguk
A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
Li, Zhen
Heat transfer measurements on a micro disk with high rotational speed
Li, Li
Mechanism analysis of rain-wind induced vibration on high-voltage transmission line
Li, Na
Finite-element mode for parametric Analysis of wood frame shear walls
Li, Linxue
Experiments Based Integral Design of Architecture and Structure
Li, H.Y.
Study of rail freight capacity release in the typical existing trunk after the completion of high-speed railway
Li, Y.
Study of rail freight capacity release in the typical existing trunk after the completion of high-speed railway
Li, Hongmei
Dynamic Collapse Analysis of Reticulated Shell Structures with Substructures
Lin, Anli
Magnetocaloric properties in the PrFe2Ge2 antiferromgnet
Liu, Zhanjun
Design Research of Machine Frame on Three Dimensional Models
Liu, W.W.
Pop-in characteristic induced by nanoindentation in ZrB2-SiC composites
Liu, Yanping
Mechanism analysis of rain-wind induced vibration on high-voltage transmission line
Liu, Shuyang
Rheology analysis of multiphase flow and its modeling
Liu, Junhong
Residual stress analysis on titanium alloy TC4 by LSP
Liu, Yuntao
Residual stress analysis on titanium alloy TC4 by LSP
Liu, W.
An experimental study on thermal conductivity of ceramsite cellular concrete
Liu, Shuyang
Study of the method during Micro- EDM Process
Liu, Guixiang
Research of Electro-Optics Characteristics of Polymer Dispersed Liquid Crystals Doped with Thulium Oxide Nanoparticles Gd2O3 in UV Based on Numerical Fitting