Proceedings of the 2015 International Conference on Structural, Mechanical and Material Engineering

Statistical modelling of the spring back behavior for bending of v-shaped parts from common sheet metal

Authors
Draghici Constantin
Corresponding Author
Draghici Constantin
Available Online November 2015.
DOI
https://doi.org/10.2991/icsmme-15.2015.25How to use a DOI?
Keywords
Statistic Modeling, V – Banding, Spring Back Behavior, Smallest Squares Method
Abstract
This paper presents the experimental program and measured results, obtained model, statistic analysis and some graphics for springback angle of common sheet metal. There were considered three bending parameters: bending’s angle, sheet’s thickness and radius’ punch. The obtained model is interactive second order polynomial ones. There are also presented some observations and a few relevant conclusions regarding the obtained results.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
2015 International Conference on Structural, Mechanical and Material Engineering
Part of series
Advances in Engineering Research
Publication Date
November 2015
ISBN
978-94-6252-144-5
ISSN
2352-5401
DOI
https://doi.org/10.2991/icsmme-15.2015.25How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Draghici Constantin
PY  - 2015/11
DA  - 2015/11
TI  - Statistical modelling of the spring back behavior for bending of v-shaped parts from common sheet metal
BT  - 2015 International Conference on Structural, Mechanical and Material Engineering
PB  - Atlantis Press
SP  - 107
EP  - 110
SN  - 2352-5401
UR  - https://doi.org/10.2991/icsmme-15.2015.25
DO  - https://doi.org/10.2991/icsmme-15.2015.25
ID  - Constantin2015/11
ER  -