Proceedings of the6th International Conference on Mechatronics, Materials, Biotechnology and Environment (ICMMBE 2016)
454 authors
- Bai, Baolan
- The Purification and Composition Analysis of Pentosans from Wheat Bran
- Bai, Baolan
- Research on the Effect of Pentosans from Wheat Bran on Bread Quality
- Bai, Guoyun
- Research on Helium Mass-spectrometer Back Pressure Leak Detection Purification Craft for the Specimen with Epoxy Resin
- Bai, Tianyu
- Study on Influence to The Overglaze colors by Low-carbon Catalytic Combustion Furnace of Natural Gas
- Bao, Yumei
- The Mechanical Design of an Adjustable Baby Carriage / Walker Based on Human Factors Engineering
- Bi, Yao
- A type of polycarboxylate superplasticizer used in high performance self-compacting concrete
- Bi, Yao
- Influence of a new Viscosity Modifying Admixture (VMA) on the rheological properties of cement paste
- Cai, SL
- Numerical Simulation and Experiment Study of Double Rails Propelle Type Crossing Frame
- Cao, Baiying
- The Purification and Composition Analysis of Pentosans from Wheat Bran
- Cao, Baiying
- Research on the Effect of Pentosans from Wheat Bran on Bread Quality
- Cao, Huiyan
- Establishment of Inter-harmonic Flicker Curve for Fluorescent Lamp
- Cao, Jianwu
- A Study of Synthesis of Cordierite Powder
- Cao, Nan
- The investigation of direct C-glycosylation of monosaccharides under microwave activation
- Chai, Guozhong
- The Mechanical Design of an Adjustable Baby Carriage / Walker Based on Human Factors Engineering
- Chai, Hao
- The Mechanical Design of an Adjustable Baby Carriage / Walker Based on Human Factors Engineering
- Chen, Fangqi
- Chaotic dynamics of a Rayleigh-Duffing oscillator with periodically external and parametric excitations
- Chen, Guangruan
- The structure and associated formation mechanism of deformation twins in Cu-Nb alloy
- Chen, Hong-Yuan
- Targeting cancer stem cells in cancer therapy
- Chen, Hongce
- Targeting cancer stem cells in cancer therapy
- Chen, Lin
- Research on the Photocatalytic-oxidating Degradation of Organic Dyes
- Chen, MingDer
- Characteristics of TiVN and TiVCN Coatings by Cathodic Arc Deposition
- Chen, Suiyuan
- Laser deposited Ni-based gradient coating with high wear-resistance on the surface of copper
- Chen, Suiyuan
- The laser direct deposition iron-based alloy coating with high wear resistance
- Chen, Suiyuan
- Laser direct deposition ZrO2 particle reinforced Fe60 alloy coating
- Chen, Wenjuan
- Experimental Study on COD Composition and Electrochemical Degradation of Wastewater in Offshore Oilfields
- Chen, Xiong
- Investigation on thermal protection and drag reduction by lateral jet in supersonic flows
- Chen, Xubo
- The Surface Modification of Tourmaline powder with Acryloyl Chloride and Characterization
- Chen, Yan
- Research into Genetic Problems of Powdery Mildew Resistance Gene in Tobacco
- Cheng, Dejin
- Non-isothermal Curing Kinetics of Modified Amine-Epoxy Asphalt
- Cheng, Qian
- Control Strategy of Generators' Dynamic Reactive Power Based on Local Voltage Signal
- Cheng, Weichao
- The Mechanical Design of an Adjustable Baby Carriage / Walker Based on Human Factors Engineering
- Cong, Qian
- Analysis about the Influence of the Damping Structure on the Mechanical Property of Roller
- Cui, Hong
- A Study of Synthesis of Cordierite Powder
- Cui, Jia
- Establishment of Inter-harmonic Flicker Curve for Fluorescent Lamp
- Cui, Junguo
- Natural transverse vibration characteristics of jack-up riser and its applied research
- Cui, Rui
- Research on Evaluation Method of Jamming Effect on ISAR Using Wavelet Moment
- Dai, Shunan
- Vibration Controlling Techniques for Aircraft Hydraulic Pipe Excited by Pressure Pulsation Forces
- Dai, Xiaofei
- Theory and Validation of Electricity Price Issuing Program for Concentrated Meter Reading
- Dang, Yan
- Well pattern and space deployment of horizontal well to prevent fracturing channeling in fractured reservoir
- Din, Rui
- LESO Based Backstepping for Quadrotor Trace Tracking with Tracking Error Constraints
- Ding, Jianxin
- Experimental research on concrete material components impacting on mechanical properties under uniaxial compression
- Ding, Lei
- A Successful Alkali/Surfactant/Polymer Flooding Test on Silica Sand
- Ding, Ying
- A Brief Talk on Information and Communication Safety Management of Electric Power Enterprise
- Dong, Jingfang
- Study on the Effect of Wind-Thermal Installed Capacity Ratio on the Stability of DC Islanded System
- Du, Hongji
- Accurate Fault Location for Double-Circuit Lines on the Same Tower with Asymmetrical Parameters
- Du, Shi-guo
- Inhibitor performance and the preparation study of urea formaldehyde resin matrix composite particle
- Du, Xiaoran
- Digital controller design based on APF's vector resonance control
- Du, Zongzhan
- Development of Virtual Reality Simulation Training System for Substation
- Feng, Limin
- Lightning electromagnetic pulse magnetic field calculation
- Fu, Cong
- Dynamic Reactive Power Control Strategy of Generators Based on WAMS
- Fu, Xuemin
- Effect of frequency on multi-axial fretting fatigue damage behavior of Al-Zn-Mg alloys
- Fu, Xuemin
- Experimental analysis of frequency on tensile-compressive fretting fatigue behaviour of Al-Zn-Mg alloy
- Gan, Hong
- Introduction to Raw Material Quality of Asphalt Pavement Construction
- Gao, Fengjie
- LESO Based Backstepping for Quadrotor Trace Tracking with Tracking Error Constraints
- Gao, Jingwei
- Feature Extraction of Bearing Status Based on Multi-Scale Bistable Stochastic Resonance Array
- Gao, Linze
- Establishment of Inter-harmonic Flicker Curve for Fluorescent Lamp
- Gao, Tiejun
- Problems and Solutions of the GW16 Type Isolation Switch in Operation
- Gao, Ying
- Exploration of Product Design Mode under Low-carbon Concept
- Gao, Yuan
- Problems and Solutions of the GW16 Type Isolation Switch in Operation
- Ge, Jijiang
- A Successful Alkali/Surfactant/Polymer Flooding Test on Silica Sand
- Gu, Tiansheng
- A New Type of Hybrid Semi-Active Control Strategy in the Application of the High-speed Railway Vehicle Vibration Control
- Guan, Shengqi
- Surface Defect Detection Method of Mechanical Parts Based on Target Feature
- Gui, Hongming
- Digital controller design based on APF's vector resonance control
- Guo, Jianming
- Well pattern and space deployment of horizontal well to prevent fracturing channeling in fractured reservoir
- Guo, Junfeng
- Study on the determination of the reasonable finished state for cable-stayed bridge with hybrid girder
- Guo, Junhong
- Control Strategy of Generators' Dynamic Reactive Power Based on Local Voltage Signal
- Guo, Qingzhong
- Preparation of Fluoroalkyl-containing Silica Nanoparticles and Its Waterproofing Application on Concrete
- Guo, Yuanshen
- Development board design of open electronics experimental system based on single chip microcomputer
- Hao, Xinjie
- Study on the influence of reactive power regulation to the power grid in the pumped storage power station
- Hao, Yu-Jing
- Study on Construction Organization Measures of Transmission Line
- He, Jinting
- Effect on Hep-1cell Calcium Homeostasis after Aβ25-35 Injury
- He, Qiqi
- Lightning electromagnetic pulse magnetic field calculation
- He, Wei
- Chen-Mobius voice communication system
- He, Wei
- Lightning electromagnetic pulse magnetic field calculation
- He, Wei
- Real-time data acquisition serial communication
- Ho, Wei-Yu
- Characteristics of TiVN and TiVCN Coatings by Cathodic Arc Deposition
- Ho, Woei-Yun
- Numerical Modeling of Transient Thermoelectric Transports in Silicon Nanowire
- Ho, Woei-Yun
- Characteristics of TiVN and TiVCN Coatings by Cathodic Arc Deposition
- Hong, Benben
- Surface Defect Detection Method of Mechanical Parts Based on Target Feature
- Hou, Ling
- Problems and Solutions of the GW16 Type Isolation Switch in Operation
- Hou, Songxue
- Research and application of Hubei electric power company anti-electricity stealing laboratory
- Hou, Yanyan
- Study of Moisture Content Automatic Detection Based on Single Chip Microcomputer
- Hu, Lisong
- Preparation of Fluoroalkyl-containing Silica Nanoparticles and Its Waterproofing Application on Concrete
- Hu, Mingxia
- Research and application of Hubei electric power company anti-electricity stealing laboratory
- Hu, Shanqing
- Synchronization of JESD204B-based ADCs
- Hu, YS
- Numerical Simulation and Experiment Study of Double Rails Propelle Type Crossing Frame
- Hu, Yingmo
- The Surface Modification of Tourmaline powder with Acryloyl Chloride and Characterization
- Huang, Bo
- Analysis on Practical Application and Construction Process of Grouting Technology in Architectural and Civil Engineering
- Huang, Jianchong
- Research on Evaluation Method of Jamming Effect on ISAR Using Wavelet Moment
- Huang, Jin
- Characterization of the oxidation resistance property of SiAlON materials with the standard method of GB/T 32329-2015
- Huang, Yingjun
- Research on Helium Mass-spectrometer Back Pressure Leak Detection Purification Craft for the Specimen with Epoxy Resin
- Huang, Zuqiang
- Synthesis and investigation of the self-assembly behavior of guest block copolymers for supramolecular responsive materials
- Jia, Yang
- Localization Management and Practice of Transmission Line
- Jiang, Cao
- Research on Torsional Vibration in Traction Drive System of High-speed Train
- Jiang, ChuanJie
- Property analysis of throttle rubber material under high temperature and high pressure in Sulige gas field
- Jiang, Guangyu
- Study on Comparison and Selection of SCR Denitration Reductant's Preparation System in Heat-engine Plant
- Jiang, Jiaxin
- Effect of frequency on multi-axial fretting fatigue damage behavior of Al-Zn-Mg alloys
- Jiang, Jiaxin
- Experimental analysis of frequency on tensile-compressive fretting fatigue behaviour of Al-Zn-Mg alloy
- Jiang, Ming
- Research on the typical mechanical configuration scheme of the whole mechanical construction of overhead transmission lines in plain area
- Jiang, Ming
- The Optimization Design of Double Friction Drawing Reel of Winch Based on ABAQUS