Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
1459 authors
- Shi, Yanggen
- Application of Fuzzy PID in Coordinated Control Object of Supercritical Unit
- Shu, Min
- A Method of Abstract Service Aggregation for Service Composition in Service oriented Manufacturing System
- Shu, Pei
- Kinematics Research of Rotating-Sleeve Distributing-Flow System for Reciprocating Plunger Pump
- Shu, Ping
- Fatigue Behavior of Weld Titanium Alloy Hydraulic Tube
- Sima, G.F.
- Interface shear strength between slender bamboo rod and ruin soils with high plasticity
- Song, Cuiping
- Battery matching of load isolated electric vehicle based on operating mode energy consumption
- Song, Cuiping
- Principle and Application of Ball Transmission Mechanism
- Song, Fenfen
- The parameters of orthotropic sand fabric
- Song, Hao
- The life cycle assessment of automotive biological butanol
- Song, Jingzhou
- Simulation and Comparison Research of Lagrange and Kane Dynamics Modeling for The 4-DOF Modular Industrial Robot
- Song, Ping
- Studying the reasonable roadway layout under the condition of high stress soft rock
- Song, S.W.
- Speciation Analysis and Removal of Heavy Metals Zn, Cu, Cd from Sludge by Organic Acid
- Song, Shengnan
- The simplified design method on bearing capacity of Cold-formed Thin-wall Steel Composite Floor
- Song, X.N.
- Experimental Study of Pool Nucleate Boiling Heat Transfer Characteristics of Lithium Bromide Solution with Additives
- Song, Xiang-Bin
- Heavy Metal Contents and Accumulation Characteristic of Dominant Plants in Tin Mining Wasteland of Gejiu city,Yunnan,China
- Song, Y.H.
- Comparative Study on Microwave Co-pyrolysis Products of Low-Rank Coal under Circulating Gas and N2 Atmosphere
- Song, Yong Sheng
- The effect of grinding media on the flotation of fine chalcopyrite
- Song, Z.R
- Study of New Welding Tubular Joint Used For Jacket
- Song, Zhigang
- Pedestrian Induced Structural Vibration and the Walking Force Models Basing On Biomechanics: a Literature Review
- Su, Fang
- Application and study of Shield Mule
- Su, Lushun
- Analysis Research of the IGBT’s radiator based on ICEPAK
- Su, Ya
- Study on Air Distribution of Displacement Ventilation in Dome Cinema in Summer
- Su, Zhongming
- Study on the Grouting Pre-Reinforcement Mechanism and Effect Evaluation in Water-rich Loess Tunnel
- Sun, Baozhong
- Research on the relationship between the age of blood stains and the bending rigidity of blooded cotton fabric
- Sun, Fuchun
- Calibration Technology and Application of Ultrasonic Sensor for Partial Discharge Detector
- Sun, Hanxu
- Simulation and Comparison Research of Lagrange and Kane Dynamics Modeling for The 4-DOF Modular Industrial Robot
- Sun, Jian
- Research on the monitoring system for wire rope of window cleaning machine based on the technology of ZigBee
- Sun, Jiao
- Numerical Simulation of centrifugal compressor impeller flow flied based on ANSYS Workbench
- Sun, Jingjing
- Series form solution for a graded composite strip with elastic variation in span direction
- Sun, Lina
- Numerical Simulation of Solidification Structure Formation for a Large Flat Ingot during Water-cooled Mold Casting
- Sun, Miaomiao
- THE EXPERIMENT ABOUT RECOVERABLE ANCHOR CABLE IN THE FOUNDATION PIT SUPPORT
- Sun, Qiaomei
- Speed governor design based on fuzzy self-tuning PID method for marine diesel engine
- Sun, Shuo
- Study on formation mechanism of YSZ thermal barrier coatings with segmented structure
- Sun, Xiu Juan
- RA-GSMC Design for a SISO Servo-system with Nonlinear Uncertainty
- Sun, Yi
- Research on the model of the production of hot forming process and the optimization method of production cycle
- Sun, Yi
- The structure design and performance analysis of the transportation fork in hot stamping production line
- Sun, Yi
- Research on the cooperative work of multi manipulator in hot stamping production line
- Sun, Yuhong
- Effect of Exogenous 24-Epibrassinolide on Salt Resistance of watermelon (Citrullus lanatus L.) under Salinity Stress
- Sun, Z.G.
- The deformation mechanism of soft coal roadway under dynamic mining influence and its optimization support design
- Suo, Hongli
- Study on formation mechanism of YSZ thermal barrier coatings with segmented structure
- Tan, Pi-Qiang
- Study of the Particulate Purification Efficiency of Diesel Oxidation Catalyst and Catalyzed Diesel Particulate Filter
- Tan, Pi-Qiang
- Study on NOx emissions from a national V heavy-duty diesel engine
- Tan, Xin
- The Tooth Contact Analysis of a Heavy-load Planetary Gearing
- Tan, Yefa
- Mechanical Properties and Fracture Toughness of Epoxy Resin Improved by Low-viscosity Hyperbranched Epoxy
- Tang, Bin
- Research on Rapid Analysis for Purity of SF6 via Ion Mobility Spectrometry
- Tang, D.
- Effects of mesh density on LES of the flow structure in internal combustion engine
- Tang, Fangyu
- Mechanism analysis and protective measures of anti-salt corrosion in concrete
- Tang, Haijun
- Fatigue Behavior of Weld Titanium Alloy Hydraulic Tube
- Tang, Li
- Coordinated Control Object Modeling Based on Improved Particle Swarm Optimization Algorithm
- Tang, W.
- The seismic design suggestions of girder bridge
- Tang, Xianmin
- Anisotropy of fracture toughness of 2124 aluminum alloy plates
- Tang, Xiaoying
- Study on hot deformation behavior of 70Cr3Mo back-up roll steel using processing map
- Tang, Xiya
- The Research of Bracket Culture in Chinese Traditional Wooden Architechture
- Tang, Yuehong
- Second-order geometric continuous processing of singular points
- Tang, Z.J.
- Investigation on thermodynamics characteristics of biomass thermal decomposition using TG/DSC method
- Tang, Z.X.
- Investigation on thermodynamics characteristics of biomass thermal decomposition using TG/DSC method
- Tao, Chen
- Temperature Dependence of Microwave Dielectric Properties of SiO2 /BN Composite
- Tao, Wei
- Analysis of the Effect of Spring on the Force Behavior of Cable Net
- Tao, Yi
- A Low-power Cordic and CSD based DCT Architecture
- Tian, Hao
- Study on the Intelligent Technology of Power Distribution Network
- Tian, Shengze
- Applicability Study of Travelling-wave Effect on Multi-tower Extradosed Cable-stay Bridges Using Symmetric Analyzing Method
- Tian, Wei
- Present Situation and Development Prospect of Garbage Power Generation Technology in China
- Tian, Wei
- Present situation and development of wind power generation and its forecasting technology
- Tian, Y.
- Influence of carbon and alternating oxic-anoxic model on sludge bulking and pollutant removal effect
- Tian, Y.
- Shortcut nitrification-denitrification can be attributed to the operation pattern of intermittent aeration profile
- Tian, Yongjun
- Study on the Influence for Hybrid Electric Vehicle Performance by the Thermal Effects of Traction Motor
- Tong, Liang
- Design and Realization of the Automatic Gear Machining System
- Tong, Liang
- Robotic Plugging Bolt Holes of Automobile Hub before the Spraying Process
- Tong, Yun
- Design of superfine denier Nylon Fabric
- Tsybin, Nikita Yu.
- Long Strength of Layered Composite under Normal Fracture
- Turusov, Robert A.
- Long Strength of Layered Composite under Normal Fracture
- Wan, Lei
- Application of Fuzzy PID in Coordinated Control Object of Supercritical Unit
- Wan, Long
- An E-DNA Sensor for Sequence-Specific DNA detection
- Wang, An-Ling
- Reflective properties of Anti-forgery Optically variable films series
- Wang, Andong
- Calibration Technology and Application of Ultrasonic Sensor for Partial Discharge Detector
- Wang, Anling
- The reflection coefficients of multilayer anti-counterfeiting optical films for S-polarized wave
- Wang, B.
- Experimental Study on Mechanical Characteristics of Jatropha Seeds
- Wang, Bin
- Experimental Investigation of Flow Characteristics Induced by Two Types of Right-Angle-Shaped Plasma Actuators
- Wang, Bing
- Study on axial compression ratio of Seismic Performance of Steel Tube Filled with Steel-reinforced Concrete Composite Column
- Wang, Bing
- The recycled aggregate concrete filled steel tube finite element model
- Wang, Bing
- Methods to Measure the Rotational Inertia of Rocket Projectiles of Ultra Large Diameter
- Wang, Bingxin
- The Bionic Research on Avian Visual Structure in Multi-Target Monitoring
- Wang, Bo
- Effect of trace magnesium addition on the characteristics of mechanical properties in high strength low alloy steel
- Wang, Changsheng
- The vibration control research of MRE damper for the multi-level eccentric structure
- Wang, Chaohua
- Fabrication, morphologies and properties of luminescent PMMA porous nano-fibers
- Wang, Chen-Sheng
- Application and study of Shield Mule
- Wang, Chuan Jiang
- RA-GSMC Design for a SISO Servo-system with Nonlinear Uncertainty
- Wang, D.
- Numerical analysis of the influence of sea level rise on sediment deposition in the Yangtze Estuary channels
- Wang, D.P.
- Study on radiation power density effects on flight performance
- Wang, Danyong
- Research on Combinatorial Approach in Composition-structure-property of Non-metallic Materials
- Wang, Dengfeng
- Review on Stability of Thin-Walled Cylindrical Shells Subjected to Axial Compression
- Wang, Donghong
- The propagation and accumulation of dimensional shrinkage in investment casting
- Wang, Dongsheng
- A Study on the Rubber Dampers Which Have Been Managed Under Different Aging Environments
- Wang, Dongsheng
- Optimal Design of Bracket Isolator Stiffness in Vibration and Shock Environment
- Wang, Enzhi
- Vane shear rheometer test to demonstrate the debris flow initiation characteristics and phenomena
- Wang, Fang
- Research on Small-scale Variable Capacity Evaporative Cooling Plate System for Chips with High Heating Flux
- Wang, Fen
- Research on Typical Working Conditions of Calcining Zone Temperature
- Wang, Feng
- Study on the Intelligent Technology of Power Distribution Network
- Wang, Fengqin
- Improvement on accuracy of coiling temperature at tail of strip during U-type cooling process
- Wang, Fujun
- Research on the relationship between the age of blood stains and the bending rigidity of blooded cotton fabric