Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology

Thermomechanical Modeling and Analysis of Workpiece in End Milling Process

Authors
Yong Feng, Binghui Jia, Guodong Yan, Xiaolin Jia
Corresponding Author
Yong Feng
Available Online August 2015.
DOI
10.2991/icaemt-15.2015.21How to use a DOI?
Keywords
Oblique cutting, End milling, AISI1045 steel.
Abstract

In order to study the cutting force distribution of the workpiece during the process of vertical milling machining, the thermomechanical model of the steady oblique cutting is derived. The measuring system of cutting force is also established, and then the feasibility of theoretical model is verified. First, according to the steady oblique cutting of cutting force and cutting temperature characteristics, coupled thermomechanical model of the workpiece in the milling process is derived. Based on above, a dynamic solving approach for cutting force is proposed. Then, the dynamic measurement system of force is established by using artificial Kistler force measurement. Finally, the thermomechanical model and dynamic measurement system are used to analyze the cutting force of AISI1045 steel under specific conditions. Analysis results indicate that the maximum of Fx, Fy and Fz are 198 N, 40 N and 90 N respectively, the error between calculated and measured value are 2%, 20% and 10% respectively. It shows that the established method can be used to investigate the thermo-mechanics of workpiece accurately in milling process.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
978-94-6252-108-7
ISSN
2352-5401
DOI
10.2991/icaemt-15.2015.21How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yong Feng
AU  - Binghui Jia
AU  - Guodong Yan
AU  - Xiaolin Jia
PY  - 2015/08
DA  - 2015/08
TI  - Thermomechanical Modeling and Analysis of Workpiece in End Milling Process
BT  - Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology
PB  - Atlantis Press
SP  - 102
EP  - 107
SN  - 2352-5401
UR  - https://doi.org/10.2991/icaemt-15.2015.21
DO  - 10.2991/icaemt-15.2015.21
ID  - Feng2015/08
ER  -