Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology

Stress-strain analysis of NC bending and springback process for 21-6-9 stainless steel tube

Authors
Jun Fang, Shiqiang Lu, Kelu Wang, Xuguang Min
Corresponding Author
Jun Fang
Available Online August 2015.
DOI
https://doi.org/10.2991/icaemt-15.2015.20How to use a DOI?
Keywords
21-6-9 stainless steel tube; NC bending; springback; stress-strain; FE simulation
Abstract

In order to study the distribution of stress-strain of bending and springback process, based on the platform of ABAQUS code, a 3D elastic plastic model of the whole NC bending process of 21-6-9 (0Cr21Ni6Mn9N) stainless steel tube was established, and its reliability was validated. Then, the distribution and variation laws of the stress-strain for bent tube during NC bending and springback process were obtained by FE simulation. The results show that the outside of bent tube suffers tangential tension stress, and that of the inner is more complicated after bending. The stress unloading is not obvious after retracting mandrel, which indicates that the process of retracting mandrel has less effect on springback. The stress unloading is obvious, and a reverse loading phenomenon occurs after springback, while the strain of the bent tube is nearly not changed. The results can provide theoretical basis for springback control during tube NC bending process.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
978-94-6252-108-7
ISSN
2352-5401
DOI
https://doi.org/10.2991/icaemt-15.2015.20How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jun Fang
AU  - Shiqiang Lu
AU  - Kelu Wang
AU  - Xuguang Min
PY  - 2015/08
DA  - 2015/08
TI  - Stress-strain analysis of NC bending and springback process for 21-6-9 stainless steel tube
BT  - Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology
PB  - Atlantis Press
SP  - 98
EP  - 101
SN  - 2352-5401
UR  - https://doi.org/10.2991/icaemt-15.2015.20
DO  - https://doi.org/10.2991/icaemt-15.2015.20
ID  - Fang2015/08
ER  -