Vocational education is one solution to improve the quality of human resources in Indonesia. The challenge as well as the advantages for Indonesia is a large demographic area, so that the standardization of vocational education is needed. In this study, it is discussed how the perceptions of standard...

In running a business in the field of fashion, it takes creativity and ability effort. This research aims to know the influence of creativity against the success of the effort, influence the ability of the effort towards the success of the effort, influence creativity against the success of the effort. The...

Creativity is very fundamental in apparel making and can be developed through appropriate learning processes. The question that needs to be addressed is how to develop students’ creative potentials through learning processes, especially in the vocational school for fashion design. This study aims to...

The purpose of this study is to explore how much influence of social support on teacher career perception of prospective teachers. This research uses descriptive correlational method with quantitative approach. The population of this research was 129 students of the 5th semester of Informatics Engineering...

The issue of the environment is an important topic that needs serious attention. Global warming and environmental pollution is one proof that human activity has a direct impact on environmental preservation. The purpose of this study was to determine how the ideal concept of curriculum development of...

Learners have different ways of understanding a subject matter. Teacher adjustment to the characteristics of learners greatly helps learners in achieving mastery learning. Learners who are highly motivated in learning have a great opportunity in obtaining high learning achievement. The purpose of this...

The objective of this study is to understand the direct contribution of basic pattern making knowledge, drafting and sewing skill to the outcome of women’s blazer making. The results showed that (1) knowledge of pattern making directly and significantly contributed to the outcome of women’s blazer making;...

Efforts to improve the learning program to support the revitalization of vocational education is an opportunity for vocational technology education (PTK) study program. The purpose of this research is to analyze the potential of PTK study program in preparing the learning program and the ability to develop...

Having transferable skills is very important in the 21-st century. However, there is limited information about the perceptions of which transferable skills are needed in the workplace. This study aims to explore the transferable skills among students and lecturers in universities in Indonesia. Transferable...

In coping with the industrial era 4.0, the concept of ‘competency’ in vocational education must be converted into ‘capability’ to enable graduates engage with the latest work patterns. Vocational education must be flexible by the application of modular patterns combined with block system. It further...

Educational factors that are less appropriate in the delivery of materials and the selection of instructional media causes lesson objectives are perfectly acceptable by students. The educational factors here are defined as the facilities needed in the learning process such as learning media used by lecturers....

This study aims to investigate the contribution of ANDI learning model to emulation ability and its impact to students’ creativity in culinary arts course. It involved 131 students majoring in culinary taken randomly from four state and private universities in different cities in Indonesia. The data...

Arabic, since 1971, has been an official language of the United Nations alongside English, French, Spanish, Russian, and Chinese. Students’ motivation and achievement in Arabic learning as second language learning is decreasing with age. This paper presents the effectiveness of Digital Game-Based Learning...

Based on the researcher survey, it appears that many students were passive, daydreaming, and busy with cellphone and non-related activities during the learning process. The purpose of this research is to improve learning activities and learning outcomes through the implementation of Problem-Based Learning...

This study aims to determine the performance and feasibility of Media Learning Trainer Human Mechanic Interface on Electric Motor Installation subjects. This research is done through the following stages: (1) analysis; (2) design; (3) implementation; (4) validation; (5) testing; and (6) experiments in...

The purpose of this paper is to explain information and communication technology that can support the field of education in the disruption era, namely Augmented Reality (AR). The contribution of AR in education can provide a learning experience. Vocational education is an education that requires balance...

Students’ skills in machining work are low. Although they are able to complete the worksheet, the result is much deviate from the science of machining process. In other words they use the principle of origin (size of not precision) without based on the rules in the machining process. The purpose of this...

The results of several studies revealed that the level of creative thinking ability of middle school students is still low, including ones of vocational high schools. Therefore, learning strategies that can improve the ability of high-level thinking, one of which is the ability of creative thinking,...

Based on the observation in the vocational high school, the students’ creative thinking skill was still low. This is because there is no collaboration between learners and teachers to solve problems. Also, there is lack of opportunities given to learners to find their own knowledge. This study developed...

This study aims to reveal the application of active learning strategy type student created a case study to improve motivation and learning outcomes. The research subject is a culinary education of home economics students. It was observed by tests, field notes, profile documentation. The analyzes were...

Using Module Based on Interactive Computer with FluidSIM-P3 Pneumatic System Simulation Software becomes the media for students to explore more experiences related to Hydraulic System. The objective of this study is to improve quality of learning based on activities, motivation, responses and learning...

In designing a machine based on effectiveness of technology, students have difficulty in integrating the theories that have been learnt and the type of engine that will be made (project). Hence, it takes course module machine element design to help them design the machine. It is expected that by using...

Computational thinking (CT) is a fundamental skill that everyone should have, dealing with problem solving, designing systems, and understanding human behavior by drawing on fundamental concepts to computer science. This study aims to apply the concept of computational thinking in ICT learning in secondary...

The objective this study is to arrange and develop control technique device learning to motivate students industry-oriented with Inquiry Based Learning. The development of this learning tool resulted in a learning module trainer equipped with trainers in accordance with the demands of the curriculum...

This research aims to know whether there is a difference between using problem based learning and direct learning instruction towards students’ learning result of acne facial skin care with a beauty electrical tool. This research is an experimental one using quantitative approach with post test only...

Digital repositories play an important role for knowledge management. They propose a useful infrastructure through which to store, manage, and reuse digital materials. Studies in exploring digital repositories have been applied in several higher educations. However, the acceptance of digital repositories...

The high number of work accidents due to human error or other factors is one the needs to be considered in the framework of both industry and educational institutions. This study is intended to determine the effectiveness of the level of implementation of Occupational Health and Safety (OHS) regulations...

Vocational School is one of the institutions which have the responsibility for the preparation of human resources in accordance with their fields. The purpose of this study is to describe the general description of vocational schools in Makassar today. The data collection used questionnaire, whereas...

School is a place used to gain knowledge. A good school will also be able to produce good graduates. To make it real, the school must have staffs that are professional in their respective fields such as principal, teachers as well as employees to create such school. Principal is the leader key who will...

the purpose of this research is to create an instrument to measure understanding of computational thinking concept and independent programming language that would not be biased by any computer’s programming language. Computational thinking can be taught through programming of visual language Scratch...

This research aimed to shed light on the application of thinking order concepts in exams and assignments based on student needs of hard-skill development. This research was a descriptive ex-post facto research. The samples taken consisted of 36 lecturers in charge of constructing exam questions and assignments...

This study aims to identify the components in the assessment model of Technical skills and employability skills based on KKNI. The method used is Research and Development (R & D) by adopting the model Borg & Gall. The validation of conceptual and hypothetical models is done through assessment. The effectiveness...

Measurements in education can not be separated from the measurement of the students' capabilities of educator candidates. The ability of prospective students can be measured by using a measuring instrument (test). A lecturer should know the scoring theory used to measure the ability of his students....

In accordance with developing curriculum, it is necessary to conduct a tracer study at fashion design education program, Universitas Negeri Surabaya. This study focuses on the profiles of the graduates programs, the relevance between graduates’ jobs with their academic backgrounds, and the satisfaction...

Bakery’s production unit is a business activity that is implement by the competency of Agricultural Processing Technology expertise in SMK Negeri 2 Cilaku Cianjur to develop the student’s competence work in the field of bakery. The performance of production units improvement, need to be prioritized in...

Education in boarding schools aims to realize a religious generation that is self-reliant and beneficial to society. One of them seeks entrepreneurship skills through training with appropriate training tools. The purpose of this study was to describe the feasibility of life skill based entrepreneurship...

This study aims to investigate the contribution or the role of government (X1), industry (X2) toward vocational school (Y) and their impact to graduates’ quality (Z) both direct and indirect contribution. It is a quantitative study. The population of this study was 335 Culinary and Hospitality students...

The development of Vocational High Schools (VHS) aims to create a qualified, sophisticated, independent, and modern Indonesian society that contributes significantly to the achievement of overall national development goals and to improve the nation's dignity. VHS development covers a wide range of dimensions,...

In a computer network concept, there are abstract and concrete materials. The abstract concept might lead students to misconceptions. This can be avoided by the students’ prior knowledge gained from everyday activities in accordance to the culture and environment. In bridging the abstract concepts into...

This study aims to test the effectiveness of teaching methods and timing of feedback. The design used is experimental research. The results showed that there was an increase in learning. After students engaged in teaching and learning process using feedback method, the learning media teaching method...

This study aims to determine the process of application of lavir networking model in learning. This research is a type of quantitative research with quasi experiment method. The data were analyzed descriptively and hypothesis test (anova) then further tested using scheffe test and tukey test. The results...

The development of information technology today has negative impacts for education. These negative effects, among others, that hamper the quality of education are soft skill, especially honesty and self-confidence in their own work and copyright awareness. There are numerous plagiarism cases in Indonesia....

The population in this research is all teachers who receive professional allowance in 2016 in all provinces of Indonesia. Samples of province were 13 provinces and those of teachers were 195. Data collection used was self-assessors. The data were analyzed descriptively, both quantitative and qualitative....

Efforts to be made in the development of Vocational Education in Indonesia include creating a roadmap for SMK development and refining and aligning the SMK curriculum with competencies according to the needs of the graduates (link and match) to increase the relevance of vocational education not yet in...

The partnership model between vocational educational institutions and industries, known as Public-Private Partnership (PPP), plays an important role to overcome the skill gaps requirement between vocational educational institutions graduates and industries. The aim of this research is to provide information...

The purpose of this research is to develop teaching factory-based for Entrepreneurship Learning Model in Vocational High Schools. Furthermore, the model is named “TEFA-Entrepreneurship Model”. The type of research is research and development (R & D). The development process followed Plomp model development...

This study aims to design a partnership model of Vocational High School with Business and Industrial World. The stages of model development used Plomp model design. The object of the research was in Vocational High School in Makassar City. The result of partnership model design based on need analysis...

In most developing countries the vocational curricula are still lagging behind in terms of linkage and matching with skills needed by the industry. Teaching factory is a suitable learning and training model that can produce graduates who are competent with industry desirable skills. Teaching factory...

The principles of constructivism have been widely used in science education. Constructivism emphasises knowledge as students’ active construction. A teacher acts as a mediator, convinces what students know, and organises tasks so that students can build knowledge. Students work out meaning in a small...

Experiential Collaborative provides opportunities for students to learn more actively to work together in groups in order to achieve a goal. Self-efficacy reflects the level of confidence in executing certain tasks. The purpose of this research is to see the impact of group cooperative and self-efficacy...

This study aims to describe how the application of Talking Chips learning model to improve motivation and learning outcomes of basic culinary art students of SMK Negeri 8 Medan. This research type is Research development. It consists of four stages, namely the stage of planning, development, implementation...

This classroom action research aimed to improve the quality of student achievement and instructional process in the Concrete Construction 1 course by implementing the problem-solving method. This study was done through four steps namely planning, implementing, observing, and reflecting. The research...

This study aims to facilitate learning, therefore all existing technologies and educational technology products must be selected and built on the needs analysis of a particular learning environment. E-health learning media is an Android-based Application. As we know that Android is one of the most widely...

Education is a gateway to the achievement of the nation's ideals. Qualified education enables to produce reliable nation successors. There are many aspects related to qualified education, including learning activities. The challenges faced by education world are increasingly complex. In the industrial...

This research was the preliminary study of a multi-year designed research. The research aims to explore experienced vocational teachers, industry and vocational education experts for vocational learning. This study used quantitative inquiry approach with questioner or inventory and Focus Group Discussion...

This study aims to validate the management model of public relations and industry measurement in Community College in South Sulawesi. This research was conducted on Community College Sidenreng Rappang State and Community College Enrekang State in South Sulawesi Province. This research uses quantitative...

Learning management plays an essential role in creating an atmosphere of learning in improving the graduates' competency. Total quality management (TQM) is a management system that can be applied in a learning process. The purpose of the paper is to describe the initial situation of the student, than...

The objective of the research is to know the policies used in determining the need of supervisors in North Sumatera Province. The research also aims to know the process of determining the need of the supervisors. This research uses qualitative approach with descriptive method. The subjects of the research...

There have not been any indications showing that leadership models applied by a principal in leading education unit (SMKN Technology) affects teachers’ performance. The common problem to be studied is how the implementation of models of effective school leadership on teachers' performance. This study...

Low and insufficient school infrastructure has negative impact on students learning and graduation. Many factors contribute the emerging of infrastructure gap in education. It is caused by the lack of maintenance and old developing, the ineffectiveness of government planning. It needs planning of proposing...

This research aims for developing and implementing the proportion of field competency model that can be used as Industrial Market recommendation for determining the result of industrial practice selection that is appropriate with the criteria. The development design was grouped into three developmental...

This study aims to determine changes in Aspergillus sp population and biochemical changes during the process of controlled corn flour fermentation. The research is divided into two stages. The first stage was the making of starter by adding aquades as much as 100 ml into 50 g of corn flour. Furthermore,...

The objectives of the study were to develop the nutrition pocketbook regarding dietary guidelines for adolescents and do the pilot test of the nutrition pocketbook to analyze the nutritional behavior of junior high school students. The research was conducted from March to August 2016 at Three Junior...

This study aims to describe form and meaning of the Islamic wedding in Lumpur Village. This research is a qualitative descriptive research. The data were collected using interviews, observation, and documentation. The result of this research is Pencak Macan (a wedding ceremony based on Javanese tradition)...

Entrepreneurship education in vocational schools is necessary, with an understanding of how to develop and encourage the birth of potential young entrepreneurs. The purpose of this study to see the determinants of entrepreneurial intentions can be interpreted as the process of seeking information that...

This study aimed to identify the professional competence of chefs in traditional Indonesian restaurants in Malang city. The study was conducted in two stages involving 12 selected restaurants. The first stage was identifying the profile of chefs, while the second stage consisted of in-depth interviews...

The high rate of work accidents in East Java is mainly due to human factor, in this case, related to the low level of workers’ attitudes towards the priority of work safety (MKK/Memprioritaskan Keselamatan Kerja). Theoretically, work safety training (PKK / Pelatihan Keselamatan Kerja) is able to improve...

This descriptive research aims to give an overview of the effectiveness of clothing pattern making training with CAD system on Fashion students viewed from the result of knowledge test and performance test and the students’ response result. Techniques of collecting data obtained in research were documentation,...

This research aims to develop gluten-eggs free cookies based native Maranta Arundinaceae flour and Maranta Arundinaceae flour rich in RS3, to analyze the chemical composition, and to know the hedonic of semi trained panelists against cookies as well as in vivo evaluation in diabetes mellitus mice. Self...

This paper describes the development steps of The Collaborative Jig Saw Project-Based Learning (CJPjBL) Model in thermodynamics on vocational college. The development of the CJPjBL model applies five steps of the ADDIE model ie: 1) analyzing current thermodynamics learning model, 2) designing the new...

this article aims at examining the effectiveness of interactive multimedia about reproductive health to enhance senior high school students’ understanding about premarital sex among youths in Indonesia. This study used Plomp’s model to develop the multimedia which covered five phases namely investigation,...

This paper discusses a neural network (NN) control of a two-link flexible robot manipulator. The PID controller was formerly used to solve nonlinearities problem. One more efficient solution for nonlinearities problem is NN. An evaluation was conducted to assess the performances of the controller in...

The challenge faced by Indonesian education nowadays is the swift development of industrial revolution that is entering the 4th generation. The education at all levels of the educational units, including Vocational High School (SMK) is continuing to work early preparing itself facing the era of industry...

This study aims to design and develop the learning media of visual block programming, and to know the level of eligibility of instructional media for the Basic Programming subjects in vocational high school. The research approached to Research and Development (R & D). The overall stages in this research...

This research aims to develop and produce user interface recommendation of Social E-Book Reader application that can accommodate two-way interaction model and learning style in social learning according to user's habit and requirement tested with User Experience Questionnaire (UEQ) standard. The development...

Applied physics as a science is used to understand other sciences and as a basis for technological development. Learning Physics not only learns facts, concepts, principles, and laws, but also learns how to learn physics to gain information, scientific work steps, and the application of science and technology....