Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering

Integration and Test Methods of Energy-saving Electronic 10kV Metering Device

Authors
Q.F. Shang, Y.J. Li, Q.Q. Chen
Corresponding Author
Q.F. Shang
Available Online October 2016.
DOI
10.2991/mmme-16.2016.167How to use a DOI?
Keywords
10kV measurement; electronic voltage transformer; electronic current transformer; integration; error uncertainty
Abstract

Designed in this paper, the energy-saving electronic 10kV metering device is composed of electronic voltage transformer, electronic current transformer, electronic metering terminal and communication terminal. Electronic transformers and metering terminal are no longer designed and tested independently. Based on the principle of minimum overall error of 10kV electricity metering device, the partial pressure ratio of 10kV volt-age divider network, the ratio of electronic current transformer and current-voltage conversion, the influence of the stray capacitance generated after electronic transformer and metering terminal are packaged in the circuit breaker box, should be coordinated in integrated design consideration, based on input range and calibration capability of measurement chip. And the 10kV metering device is tested with integration method. This article describes the device structures and calibrating methods. The test results show that the active power accuracy class of the device designed in this paper is 0.5, and that reactive power accuracy class is 2.0. The developed device with low power consumption advantages and three-phase four-wire connection mode, resolved line loss problem due to the unbalanced load.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2016
ISBN
10.2991/mmme-16.2016.167
ISSN
2352-5401
DOI
10.2991/mmme-16.2016.167How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Q.F. Shang
AU  - Y.J. Li
AU  - Q.Q. Chen
PY  - 2016/10
DA  - 2016/10
TI  - Integration and Test Methods of Energy-saving Electronic 10kV Metering Device
BT  - Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering
PB  - Atlantis Press
SP  - 701
EP  - 704
SN  - 2352-5401
UR  - https://doi.org/10.2991/mmme-16.2016.167
DO  - 10.2991/mmme-16.2016.167
ID  - Shang2016/10
ER  -