Proceedings of the International Symposium on Mechanical Engineering and Material Science
292 authors
- Aguilar, Jorge A. Mora
- Estimation of the thermal loads on buildings with CAD systems support
- Aleaga, Arlys M. Lastre
- Estimation of the thermal loads on buildings with CAD systems support
- Belyakova, Elena Aleksandrovna
- New Composite Cement for Construction 3D Printers
- Belyakova, Elena Aleksandrovna
- The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
- Bureerat, Sujin
- Hybrid TLBO and BFGS for structural health monitoring optimisation problems
- C, Fei
- Reliability Prediction for CNC Machine of Spindle System
- Cao, Erfang
- Effect of Turntable Structure on Electromechanical Characteristics of Laser Tracker System
- Cao, Jing
- The Design of a Heavy-load Palletizing Robotic Structure for Coating Handling
- Cao, Qi
- Research on Current Control Technology of Fine Plasma Cutting
- Cao, Wenming
- Research on friction stir welded joints of Copper to Magnesium alloy
- Cao, Yue
- Advances in Study on Structure of Polysaccharide
- Ceng, Daoshuang
- Finite Element Analysis and Optimization Design of Combined Vehicle Suspension Girder Lateral Stabilizer Bar Bushing
- Chai, Yan
- Experimental Investigation of Oblique Laser Shock Processing on Aero-engine Fan Shaft
- Chen, Chiou-Chuan
- Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
- Chen, Chun-Lin
- Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
- Chen, Hongqun
- Application of Environmental Friendly Material R32/R1234ze in Heat Pump Water Heater
- Chen, Jiajun
- Materials Forming of Dolphin Model for Hydrodynamic Research Based on the 3D Printing Technology
- Chen, Jin-zhong
- SMFF Computation for Probe of Online Magnetic Flux Leakage Detection System with combination of ANSYS and Virtual Work Method
- Chen, Liang
- Research on the determination method of the intermittent grounding faults of shipboard medium voltage power system
- Chen, Ning
- Study on Apoptosis of Human Hepatoma Cell line HepG-2 Induced by Total Alkaloids in H.littoralis
- Chen, Yonglin
- Research on Fuel Tank Model Selection of LNG Power Ship Based on Evaporation Rate Control and Construction Cost
- Chen, Yuhua
- Research on friction stir welded joints of Copper to Magnesium alloy
- Deng, Jiangxia
- The influence of oxygen pressure on the crystallographic structure and magnetic properties of BaM films on Al2O3(0001) substrate
- Deng, Xianyuan
- The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
- Deng, Xianyuan
- Research of Portal Crane Vibration Modal Analysis
- Dijm rescu, Manuela-Roxana
- Welding Material Selection for a Specific Butt V-Weld by Means of Assisted Stress and Fatigue Calculations
- Dijm rescu, Maria-Cristina
- Welding Material Selection for a Specific Butt V-Weld by Means of Assisted Stress and Fatigue Calculations
- Ding, Ang
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- Ding, Ying
- Shipping Demand Scheme Modeling and Measurement Based on Task Constraints
- Dobrynina, Oksana L.
- Method of Evaluation of Forestry Machine Roll-over Protective Structure Efficiency
- Evstigneev, Alexandr Viktorovich
- On the Determination of the Threshold Content of Fibrous Nanomodifier
- Evstigneev, Alexandr Viktorovich
- Method and Software for Modeling the Building Materials as Dispersions
- Fang, Wei
- Zero-turn-off thyristor zero voltage block media recovery analysis of influencing factors
- Feng, Feng
- An Empirical Study on the Coordinated Development of the Service Industry and the Innovation of Science and Technology
- Frolov, M.V.
- Lime composition for the walls of buildings made of aerated concrete
- Fu, Yujian
- Research on Current Control Technology of Fine Plasma Cutting
- Gao, Jianxin
- Phase-Shifting Control of Double Pulse in Harmonic Elimination
- Gao, Shiyong
- Advances in Study on Structure of Polysaccharide
- Garc¡a, Alexis Cordov,s
- Estimation of the thermal loads on buildings with CAD systems support
- Gong, Hongwei
- Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
- Gordon, Gerardo M. Ramos
- Estimation of the thermal loads on buildings with CAD systems support
- Grintsova, Olga Vasilyevna
- The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
- Guo, Guikai
- Analysis of Natural Frequency Sensitivity of Truck Body
- Guo, Zhongliang
- The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
- Guo, Zhongliang
- Research of Portal Crane Vibration Modal Analysis
- Han, Mangui
- The influence of oxygen pressure on the crystallographic structure and magnetic properties of BaM films on Al2O3(0001) substrate
- Han, Xiaojin
- "San Cai" Human Factors Analysis Model of Civil Aviation Maintenance
- Hao, Jie
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- He, Cui
- Control Strategy for a Micro Smart Grid to Meet the Energy Demand of a Household
- He, L Z
- Investigations of continuous casting extrusion on the microstructures and properties of Zn-Al and Zn-Al-Ti alloys
- He, L.Z.
- Effect of ultrasonic cavitation on the wetting and reaction of Al-Ti/C interface
- He, Peng
- Study on joint formation evolution in laser microwelding of Pt-10%Ir and 316 LVM SS crossed wiresCrossed wire, Laser microwelding, Simulation, Joint formation
- He, Ren-yang
- SMFF Computation for Probe of Online Magnetic Flux Leakage Detection System with combination of ANSYS and Virtual Work Method
- He, Shan
- The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
- He, Shan
- Research of Portal Crane Vibration Modal Analysis
- He, Zhicong
- Forster Resonance Energy Transfer in a Hybrid System of CdTe Quantum dots-RhB
- Hou, K.
- Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
- Hou, S.F.
- Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
- Hsu, Shu-Chen
- Implementing Computer Aided Material Design of Multiple Cursors for Disabled People with InLinPreRa
- Hu, Xiaochun
- Coastline Identification from Remote-sensing Image Using Informative Vector Machine Learning
- Hua, Zhen
- Investigation of Speckle Image Correction Technique Based on Coding Assistance
- Huang, C.T.
- Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete
- Huang, JingHui
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- Huang, Yongde
- Study on joint formation evolution in laser microwelding of Pt-10%Ir and 316 LVM SS crossed wiresCrossed wire, Laser microwelding, Simulation, Joint formation
- Igor, Garkin
- Effective profiles for building constructions
- Jeon, Rock-Won
- Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
- Ji, Chenfeng
- Advances in Study on Structure of Polysaccharide
- Ji, Jie
- Control Strategy for a Micro Smart Grid to Meet the Energy Demand of a Household
- Ji, Song
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- Ji, Tie-zheng
- Synthesis of Polyethylenamine Cellulose and Its Absorbing Ability to Chromium (VI)
- Jiang, Aihua
- The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
- Jiang, Aihua
- Research of Portal Crane Vibration Modal Analysis
- Jiang, Juncheng
- Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
- Jiang, Qinglin
- The Simulation Study on Deep-sea Microbes Sampling of Holding the In-Situ Pressure Based on the Pressure Compensation with 316L Stainless Steel Accumulator
- Jiang, Ranran
- Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
- Jin, Chaoguang
- Research on Fuel Tank Model Selection of LNG Power Ship Based on Evaporation Rate Control and Construction Cost
- Jin, Honglin
- The Discussion of the further Studies of the Magnetic Suspension Vibration Isolator
- Jing, Lv
- System Reliability Analysis of Half-through Concrete-filled Steel Tubular Arch Bridge Based on Optimization Technique
- Kalashnikov, Vladimir Ivanovich
- New Composite Cement for Construction 3D Printers
- Kalashnikov, Vladimir Ivanovich
- The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
- Kang, Cunfeng
- Design of the 4-DOF Parallel Robot Control System Based on EtherCAT
- Khalid, Huzaifa
- The stability of dual-PSD based calibration system without its relative location to 3D forming of carbon fiber
- Kim, Seon-Chil
- A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
- Kim, Si-Pom
- Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
- Kim, Si-Pom
- Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
- Kirill, Nezdanov
- Effective profiles for building constructions
- Korolev, Engenij Valerjevich
- On the Determination of the Threshold Content of Fibrous Nanomodifier
- Korolev, Evgenij Valerjevich
- Method and Software for Modeling the Building Materials as Dispersions
- L, Guofa
- Reliability adaptive modeling method for CNC Machine Tools based on kernel function
- L, Guofa
- Reliability Prediction for CNC Machine of Spindle System
- Lee, Chiou-Chuan
- Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
- Lee, Geun-Ho
- Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
- Lee, Ho-Sung
- Characterization of Superplastic Behavior of AA2195 by Bulging Test
- Lee, Ho-Sung
- A Study on Microstructure of AA2219 Friction Stir Welded Joint
- Lee, Jae-Hoon
- Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
- Lee, Jae-Hoon
- Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
- Lee, Jong-Ha
- A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
- Li, Bin
- Wetting behaviors of water droplet on rough metal substrates
- Li, Fang
- Forster Resonance Energy Transfer in a Hybrid System of CdTe Quantum dots-RhB
- Li, Fang
- Application of Environmental Friendly Material R32/R1234ze in Heat Pump Water Heater