Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete

DOI

10.2991/ismems-16.2016.34How to use a DOI?

Keywords

Structural engineering, Slab-column connection, Punching, Strength model

Abstract

A strength model was presented to give the mechanical explanation of the punching phenomenon, and to predict the punching shear strength of the interior reinforced concrete (RC) slab-column connection without shear reinforcement. The model assumes that the punching shear force is resisted mainly by the shearing-compression zone of a critical crack section, and the punching shear strength is determined as the minimum load among the loads which are obtained by the intersection of the demand curve and the capacity curve of each given flexure crack. The crack corresponding to the punching shear strength is defined as the critical crack. The capacity curve is obtained by the layer model of shearing-compression zone based on the biaxial strength theory of concrete. The demand curve is defined by equilibrium of forces in slab sector. For verification, the developed strength model was applied to existing test specimens tested by other researchers

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - H.Y. Pang
AU  - Z.J. Wang
AU  - C.T. Huang
AU  - S. Pu
PY  - 2016/12
DA  - 2016/12
TI  - Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete
BT  - Proceedings of the International Symposium on Mechanical Engineering and Material Science
PB  - Atlantis Press
SP  - 192
EP  - 198
SN  - 2352-5401
UR  - https://doi.org/10.2991/ismems-16.2016.34
DO  - 10.2991/ismems-16.2016.34
ID  - Pang2016/12
ER  -