Proceedings of the International Symposium on Mechanical Engineering and Material Science

Effect of Surface Roughness on the Determination of the Creep Properties of Material by Using Three Points Bending Creep Test

Authors
Shifeng Wen, Sibo Zhou, Xianglei Liu
Corresponding Author
Shifeng Wen
Available Online December 2016.
DOI
10.2991/ismems-16.2016.5How to use a DOI?
Keywords
Surface roughness, Creep properties, Bending creep test, Finite element methodSurface roughness, Creep properties, Bending creep test, Finite element methodSurface roughness, Creep properties, Bending creep test, Finite element methodSurface roughness, Creep properties, Bending creep test, Finite el
Abstract

The purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distribution, the net section stress, and the indentation creep stress index were analyzedThe purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distribution, the net section stress, and the indentation creep stress index were analyzedThe purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distribution, the net section stress, and the indentation creep stress index were analyzedThe purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distribution, the net section stress, and the indentation creep stress index were analyzedThe purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distribution, the net section stress, and the indentation creep stress index were analyzedThe purpose of this paper is to understand the effect of surface roughness of the specimen on obtaining the creep characteristics by using bending creep tests. To this aim, a numerical study has been performed on the creep damage development of the specimen by implementing the different surface roughness into nite element models. The work may shed some light on the influence of different surface roughness on the stress distri

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Symposium on Mechanical Engineering and Material Science
Series
Advances in Engineering Research
Publication Date
December 2016
ISBN
978-94-6252-277-0
ISSN
2352-5401
DOI
10.2991/ismems-16.2016.5How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Shifeng Wen
AU  - Sibo Zhou
AU  - Xianglei Liu
PY  - 2016/12
DA  - 2016/12
TI  - Effect of Surface Roughness on the Determination of the Creep Properties of Material by Using Three Points Bending Creep Test
BT  - Proceedings of the International Symposium on Mechanical Engineering and Material Science
PB  - Atlantis Press
SP  - 22
EP  - 28
SN  - 2352-5401
UR  - https://doi.org/10.2991/ismems-16.2016.5
DO  - 10.2991/ismems-16.2016.5
ID  - Wen2016/12
ER  -