Effect of Single Modification of Talcum Powder on Mechanical Properties and Optical Properties of Waterborne UV Curing Coatings

DOI

10.2991/icmse-16.2016.62How to use a DOI?

Keywords

Single talcum modification, Waterborne UV curing wood coatings, Mechanics, Gloss

Abstract

The talcum powder was employed for the single modification of waterborne ultraviolet (UV) curing wood coatings, through optimizing process parameters to prepare the waterborne UV curing wood coatings. It was found that when talcum powder content in Waterborne UV curing wood coatings was at 2.0%, the waterborne UV curing wood coatings was dried firstly in 50øC oven for 30 min and then under UV light irradiation for 3 min, the obtained waterborne UV curing wood coating had good hardness, adhesion and impact strength. But when the content of talcum powder was more than 2.0%, the mechanical properties of waterborne UV curing wood decreased. The gloss measurement showed that waterborne UV curing wood coating gloss decreased with the increased talcum powder content, and when the talcum powder contents were more than 2.0%, waterborne UV curing wood coating showed low gloss.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Xiao-Xing Yan
AU  - Yun-Ting Cai
AU  - Guo-Yue Xu
AU  - Zhi-Hui Wu
PY  - 2016/12
DA  - 2016/12
TI  - Effect of Single Modification of Talcum Powder on Mechanical Properties and Optical Properties of Waterborne UV Curing Coatings
BT  - Proceedings of the 4th 2016 International Conference on Material Science and Engineering (ICMSE 2016)
PB  - Atlantis Press
SP  - 376
EP  - 381
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmse-16.2016.62
DO  - 10.2991/icmse-16.2016.62
ID  - Yan2016/12
ER  -