Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications

The technical limitation of Separate polymer injection in Second-class Reservoir

Authors
Yuchen Hou
Corresponding Author
Yuchen Hou
Available Online January 2017.
DOI
10.2991/icmmita-16.2016.116How to use a DOI?
Keywords
Class reservoirs; Polymer; Separate injection; Permeability; The distributions of the barrier beds.
Abstract

Daqing oilfield has entered the water cut rising stage of late polymer flooding, it is necessary for injection well to take measures of separate injection. With the increasing reduction of the main reservoir recoverable reserves, polymer flooding of the Class reservoirs is an important replacement method to oil development, which has an important meaning to develop reasonable and efficient. However, due to the complexity of the geological conditions of the Class reservoirs, the difficulty of selecting separate injection wells and layers is relatively large. According to the geological characteristics of the Class reservoirs, the technical limits of layering polymer injection in the Class reservoirs are studied by numerical simulation, which can provide scientific basis for the oilfield development decision.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications
Series
Advances in Computer Science Research
Publication Date
January 2017
ISBN
10.2991/icmmita-16.2016.116
ISSN
2352-538X
DOI
10.2991/icmmita-16.2016.116How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yuchen Hou
PY  - 2017/01
DA  - 2017/01
TI  - The technical limitation of Separate polymer injection in Second-class Reservoir
BT  - Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications
PB  - Atlantis Press
SP  - 629
EP  - 634
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmmita-16.2016.116
DO  - 10.2991/icmmita-16.2016.116
ID  - Hou2017/01
ER  -