Proceedings of the First International Conference on Materials Engineering and Management - Engineering Section (ICMEMe 2018)

Analysis of Cutting Speed On Surface Roughness Relationship Through St-90 Material Lathe Using Chisel Carbide

Authors
M. Saripuddin, Suradi, Ahmad Hanafie
Corresponding Author
M. Saripuddin
Available Online March 2019.
DOI
10.2991/icmeme-18.2019.15How to use a DOI?
Keywords
ST-90, Cutting Speed, Surface Roughness
Abstract

The dry machining process using a lathe is one of the alternatives used in this research to work on the production process oriented procession. The purpose of this study is to improve the quality and efficiency of the results of the latter. Achievement quality of a product on the lathe is by looking at the level of surface roughness obtained at cutting conditions. This research reveals the effect of cutting speed on the surface roughness of the ST-90 material in the experimental dry turning process using carbide carbide eyes. Method of measuring surface roughness with mitutoyo SJ-310 terutoyo surface means the highest mean roughness value (Rough) obtained Ra = 1,544 μm, Rq = 2,040 μm and Rz = 11,021 μm happened at cutting speed 110,658 m / min. The smallest (smoothest) surface roughness value obtained was Ra = 0.954μm, Rq = 1.210 μm, Rz = 6.606 μm occurring at a cutting speed of 66.411 m / min. From the results of research conducted it can be concluded that the faster cutting speed (cutting speed) used on dry material drying ST-90 then the value of surface roughness of the results obtained a large lathe.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the First International Conference on Materials Engineering and Management - Engineering Section (ICMEMe 2018)
Series
Advances in Engineering Research
Publication Date
March 2019
ISBN
10.2991/icmeme-18.2019.15
ISSN
2352-5401
DOI
10.2991/icmeme-18.2019.15How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - M. Saripuddin
AU  - Suradi
AU  - Ahmad Hanafie
PY  - 2019/03
DA  - 2019/03
TI  - Analysis of Cutting Speed On Surface Roughness Relationship Through St-90 Material Lathe Using Chisel Carbide
BT  - Proceedings of the First International Conference on Materials Engineering and Management - Engineering Section (ICMEMe 2018)
PB  - Atlantis Press
SP  - 69
EP  - 73
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmeme-18.2019.15
DO  - 10.2991/icmeme-18.2019.15
ID  - Saripuddin2019/03
ER  -