Proceedings of the 2016 International Conference on Electrical, Mechanical and Industrial Engineering

Tool Path Generation Method of Complex Surface 5-axis Machining

Authors
Huiying Li, Liangji Chen
Corresponding Author
Huiying Li
Available Online April 2016.
DOI
10.2991/icemie-16.2016.49How to use a DOI?
Keywords
complex surface; tool path; ball-end cutter; 5-axis machining
Abstract

To enhance 5-axis CNC machining precision of complex surfaces with a ball-end cutter, the generation method of cutter contacting (CC) paths is presented in this paper. By means of curvature circle, the feeding length was calculated within allowable error. The step-over in the perpendicular direction of feeding one, was figured out according to the permissible remnant cusps. With the local curvature and the machining error, the step-size was calculated to get the parameter of the next cutter-contacting point. The corresponding spline path of tool center points including knot vector and controlling points was obtained from the cutter contacting points.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Electrical, Mechanical and Industrial Engineering
Series
Advances in Engineering Research
Publication Date
April 2016
ISBN
978-94-6252-182-7
ISSN
2352-5401
DOI
10.2991/icemie-16.2016.49How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Huiying Li
AU  - Liangji Chen
PY  - 2016/04
DA  - 2016/04
TI  - Tool Path Generation Method of Complex Surface 5-axis Machining
BT  - Proceedings of the 2016 International Conference on Electrical, Mechanical and Industrial Engineering
PB  - Atlantis Press
SP  - 197
EP  - 200
SN  - 2352-5401
UR  - https://doi.org/10.2991/icemie-16.2016.49
DO  - 10.2991/icemie-16.2016.49
ID  - Li2016/04
ER  -