Proceedings of the 2016 2nd Workshop on Advanced Research and Technology in Industry Applications

Optimal control of CNC machining tool movement

Authors
Ning Dong, Hang Meng
Corresponding Author
Ning Dong
Available Online May 2016.
DOI
10.2991/wartia-16.2016.224How to use a DOI?
Keywords
CNC machine tools, Optimal Control, S-shape acceleration and deceleration control, k-ahead Algorithm for Velocity, Multi interpolation period algorithm,simulink simulation, Time optimization.
Abstract

The CNC machining technology is of great significance to the modern manufacturing industry. In this paper, the motion of the CNC machining tool is optimized. In order to solve this problem, we divided into steps as follows: firstly, we take a look ahead velocity curve and deceleration control algorithm and interpolation algorithm based on multi cycle in speed control. The optimization model is established in which taking the establishment of the processing time as the objective function, taking the interpolation velocity as the decision variable, and satisfying the error requirements .Then, the influence of the cutting tool"s radius on the angle between the patch and the two adjacent straight line is analyzed, and the working efficiency is affected by the change of the machining time under the condition of equal arc length. Study found that the greater the radius of the arc, the smaller the curvature, and the speed is relatively high after the inflection point. In addition, considering the influence of the instantaneous starting acceleration and the instantaneous starting speed on the model, the initial velocity is not zero and the minimum speed limit exists in the whole process. Finally, we using the Simulink component of MATLAB to model the processing line for the case of line and arc, which further confirms the accuracy of our model.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 2nd Workshop on Advanced Research and Technology in Industry Applications
Series
Advances in Engineering Research
Publication Date
May 2016
ISBN
978-94-6252-195-7
ISSN
2352-5401
DOI
10.2991/wartia-16.2016.224How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Ning Dong
AU  - Hang Meng
PY  - 2016/05
DA  - 2016/05
TI  - Optimal control of CNC machining tool movement
BT  - Proceedings of the 2016 2nd Workshop on Advanced Research and Technology in Industry Applications
PB  - Atlantis Press
SP  - 1055
EP  - 1061
SN  - 2352-5401
UR  - https://doi.org/10.2991/wartia-16.2016.224
DO  - 10.2991/wartia-16.2016.224
ID  - Dong2016/05
ER  -