Experimental Study on the Inner Wall Ring Groove of 1J116 Soft Magnetic Alloy Based on Electrochemical Machining

DOI

10.2991/pntim-19.2019.9How to use a DOI?

Keywords

Component; ECM; 1J116 Soft Magnetic Alloy; MRR; Inner Ring Groove

Abstract

In this study, electrochemical processing was introduced into the inner wall ring groove of 1J116 soft magnetic alloy to obtain higher processing precision. A single factor experimental study was carried out for the processing and forming laws and mechanisms. The effects of pulse voltage, duty cycle, pulse frequency, and electrolyte pressure on material removal rate and groove width and groove depth of the inner wall were analyzed. The results show that the effects of pulse voltage, duty cycle, pulse frequency and inlet pressure on the material removal rate are positively correlated. The groove width and groove depth of the inner wall ring groove increase with the increase of process parameters, in order to achieve higher The processing accuracy requires a reasonable range of process parameters.

Copyright

© 2019, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Bian Jianxiao
AU  - Ma Baoji
AU  - Ai Haihong
AU  - Qi Lijun
PY  - 2019/11
DA  - 2019/11
TI  - Experimental Study on the Inner Wall Ring Groove of 1J116 Soft Magnetic Alloy Based on Electrochemical Machining
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 37
EP  - 41
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.9
DO  - 10.2991/pntim-19.2019.9
ID  - Jianxiao2019/11
ER  -