Study on Processing Parameters of Cold Spray Al coating on Magnesium Alloy
Authors
Yuliang Liu, Qing Zhang
Corresponding Author
Yuliang Liu
Available Online April 2015.
- DOI
- 10.2991/mebe-15.2015.222How to use a DOI?
- Keywords
- processing parameters; Cold spraying; orthogonal design; coating density
- Abstract
Cold spray in used to form Al coating on AZ31 magnesium alloy. Several parameters, such as spraying distance, gas temperature, and gas pressure are selected as the main processing parameters for cold spray. According to orthogonal design, orthogonal experiments are designed for the optimization of processing parameters. coating density is employed to test processing result. Optimized Al coating on AZ31 magnesium alloy are sprayed by spraying distance 30 mm under pressure of 2.1 MPa at 310 .
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Yuliang Liu AU - Qing Zhang PY - 2015/04 DA - 2015/04 TI - Study on Processing Parameters of Cold Spray Al coating on Magnesium Alloy BT - Proceedings of the 2015 International Conference on Materials, Environmental and Biological Engineering PB - Atlantis Press SP - 993 EP - 996 SN - 2352-5401 UR - https://doi.org/10.2991/mebe-15.2015.222 DO - 10.2991/mebe-15.2015.222 ID - Liu2015/04 ER -