Proceedings of the 2015 International Conference on Materials, Environmental and Biological Engineering

951 authors
Abdibattayeva, M.
Extraction of Oil in Cleaning Oily Waste in Helio Devices Equipped with Concentrating Elements
Agel, Petr
Carrying Capacity of Semi-Rigid Joint of Timber-Concrete Beams
Asad, Rabie Ahmed Mohammed
Subjective Evaluations of Fabric Wear Prickle Sensation by Using New Rating Scale
Bai, Hong-bai
The Research Progress and Application Expectation of Metal Rubber Vibration Isolator
Bai, J.
Study on martensitic transformation, magnetic and compressive properties of spray casting Ni-Mn-Ga alloys
Bai, Lingyun
Influence of Al Concentration on the High Temperature Cyclic Oxidation Resistance Behavior of Fe-15Cu Alloys
Bao, Yongli
Study on Measurement Method of Material Elastic Index
Bao, Yongli
Exploration on Thermal Shock Mechanical Properties of Ceramic Materials
Beketova, A.
Extraction of Oil in Cleaning Oily Waste in Helio Devices Equipped with Concentrating Elements
Bi, Yao
Effect of the initial temperature on the water-reducing performance of polycarboxylate-based superplasticizers
Bi, Yao
Study on new viscosity modifying agents
Bi, Yao
Effect of typical clay upon the dispersion performance of polycarboxylate superplasticizer
Bi, Yao
A new Polyether mixture air-entraining agent
Bi, Yao
Effect of Ferrous ion on the performance of polycarboxylate superplasticizers
Bi, Ying
A Hybrid Bacterial Foraging Optimization based on Time-varying Chemotaxis Step and Dynamic Topology Structure
Bi, Yong-guang
Orthogonal test optimization Coix chinensis Tod. polysaccharide leaching process conditions
Bo, Baoxue
Analysis of Facet Temperature Distribution of Semiconductor Lasers
Bo, Baoxue
The High Vacuum Cleaving Passivation Characteristic on 980nm Diode Laser
Bu, Xiuu
Investigation and protection of drinking water source environment status of Yulin in Guangxi City
Bu, Yinjian
Research on the wet shot blasting technology of strip steel surface topography and finite element simulation
Cai, Ling
Marine water quality assessment and comparison during major and minor tides in near sea area of Fujian Province
Cao, Chengxuan
The Analysis and Evaluation for the Development Environment of Yangluo Port
Cao, Xuesong
Toxicity of single walled carbon nanotubes to human epithelial cells as affected by Norfloxacin
Cao, Yang
Mesoporous Indium Oxide for Nonenzymatic Uric Acid Sensing
Cao, Yang
Cuprous Oxide Cubebox for Nonenzymatic Amperometric Hydrogen Peroxide Detection
Cao, Zhi
Environmental Impacts Research for Scroll Compressor Based on Life Cycle Assessment
Chao, Li
Research on Prediction and Engineering Application of Deep Mining Rock burst in Metal Mine
Chen, Dandan
Acetylcholinesterase biosensor based on chitosan/ZnO nanocomposites modified electrode for amperometric detection of pesticides
Chen, Dandan
An experimental investigation on thermal properties of molybdenum disulfide nanofluids
Chen, Delun
Cuprous Oxide Cubebox for Nonenzymatic Amperometric Hydrogen Peroxide Detection
Chen, Donghui
Extraction Salidroside with Aqueous Two-phase System
Chen, Donghui
Study on Distribution Behavior in Aqueous Two-phase System about Four Kinds of Alkaloids in Coptis Chinensis
Chen, Gang
Study on the strain-compensated Arrhenius-type constitutive model of Mg-4Al-3Ca-1.5Zn-1Nd-0.2Mn Magnesium alloy
Chen, Guo-dong
Research on Treating Wastewater Containing Heavy Metal by Biological Immobilization
Chen, Hao
Research of Magnetotydrodynamics in a Free-Burning
Chen, Hong-wu
Performance analysis and research of the balance model foam concentrate mix equipment
Chen, Hu
Influence of the Types of Stress on Hydrogen Induced Damage By Simulating Hydrogen Diffusion
Chen, Hu
Mechanism Analysis of Hydrogen Blisters on the Surface of a Gas Tank and Research on Its Preventive Measures
Chen, Huanguo
Elastic Rebound Research in Cold Bending Processing on Aluminum Alloy Plate
Chen, Jing
Applied Research of Tops is Technology in Contaminated Soil Remediation
Chen, Jun
Effect of minor Gd on the corrosion behavior of AZ81 alloy
Chen, Jun
Microstructure and Mechanical Properties of AZ81 Magnesium Alloy
Chen, Jun
Microstructure and Mechanical Properties of Mg-12Gd-2Y-1Sm-0.5Zr Alloy
Chen, Jun
Research on Microstructures and Mechanical Properties of Mg-Gd-Y-Sr-Zr Alloy
Chen, Lei-lei
Research on Microstructures and Mechanical Properties of Mg-Gd-Y-Sr-Zr Alloy
Chen, Liang
Analysis of the Chemo-thermal Stresses around a Spherical Cavity in a Saturated Porous Medium
Chen, Mingli
Ozone pre-oxidation to the degradation technology research of MC-LR under the condition of different pH
Chen, Panfeng
Research on Non-linear Relationship among Histone Modifications in Yeast Genome
Chen, Sijia
Time Dependent Chloride Diffusion Coefficient in Concrete in Cold Regions
Chen, Wei
Study on the strain-compensated Arrhenius-type constitutive model of Mg-4Al-3Ca-1.5Zn-1Nd-0.2Mn Magnesium alloy
Chen, Xiaoya
Microstructure and Mechanical Properties of AZ81 Magnesium Alloy
Chen, Xiaoya
Microstructure and Mechanical Properties of Mg-12Gd-2Y-1Sm-0.5Zr Alloy
Chen, Xiaoya
Research Progress of Gadolinium in Heat Resistant Magnesium alloys
Chen, Xingyi
Compressive Property of Aluminum Pyramidal Lattice Material
Chen, Xiong
Mechanical Behaviors Study of Epoxy Resins Reinforced with Nano-SiO2 Particles
Chen, Xiong
Research of Magnetotydrodynamics in a Free-Burning
Chen, Xiong
Experiment Research on the Mechanical Performance of EPDM Insulation Pyrolysis Process
Chen, YaPing
Progress in Fabrication Technique of Carbon Nanotubes Reinforced Al Matrix Composites
Chen, Yong
Mesoporous Indium Oxide for Nonenzymatic Uric Acid Sensing
Chen, Yong
Cuprous Oxide Cubebox for Nonenzymatic Amperometric Hydrogen Peroxide Detection
Chen, Yong-heng
Research on Treating Wastewater Containing Heavy Metal by Biological Immobilization
Chen, Zheng
Analysis on Micro-Mechanical State at Tip of Stress Corrosion Cracking in Nickel base Alloy
Chen, Zhenhua
Investigation of the Preparation Process for Pulsatilla Chinensis (Bunge) Regel Total Saponins-Hydroxypropyl- -Cyclodextrin Inclusion Compound Pellets
Chen, Zhenhua
Investigation of HP- -CD Inclusion Compound Preparation Process for Pulsatilla Chinensis (Bunge) Regel Total Saponins
Chen, Zhi-qun
Thermal Improvable Behavior of A Pressed Fitting Mixed Explosive
Chen, Zhiqiang
Curve analysis of shear lag effect of box girder bridge
Choe, Kyeong-hwan
Effect of Mo on the microstructure and thermal expansion of high Si ferritic heat-resistant ductile iron
Chong, Xiao
The Crack Tip Fields for Anti-plane Crack in Functionally Graded Piezoelectric Materials with Arbitrarily Gradient Direction
Chong, Xiao
The Higher Order Crack Tip Fields for Anti-plane Crack in Power Functionally Graded Piezoelectric Materials
Cong, Fengxia
Research on Seismic Reliability Analysis of Urban Water Supply Network
Cong, Xiaohong
Influence of Calcined Shale on Sulphate Corrosion Resistance of Cement
Cui, Fan
Wear characteristics of a W6Mo5Cr4V2 high speed steel in friction stir welding of AA6061/SiC/55p composite
Cui, Lijun
The assembly dimension control technology of stainless steel pipe and copper fins for thermal shroud
Cui, Shuling
Dissociation Mechanism of 6-APA reacted with a varying number of H+
Cui, Yinghao
Analysis on Micro-Mechanical State at Tip of Stress Corrosion Cracking in Nickel base Alloy
Dai, Yao
The Crack Tip Fields for Anti-plane Crack in Functionally Graded Piezoelectric Materials with Arbitrarily Gradient Direction
Dai, Yao
The Higher Order Crack Tip Fields for Anti-plane Crack in Power Functionally Graded Piezoelectric Materials
Deng, Chang’ai
Development of Ti-Al intermetallic compounds porous material with reactively synthesizing and its biological application
Deng, Jingheng
Synthesis and Characteristics of Multi-walled Carbon Nanotubes Coated Nanostructure TiO2
Deng, Peng
Experimental Research on Hysteretic Behaviors of Square Tubular T-joint
Deng, Peng
Theory Research and Practice of Structure Safety Measures and Deformation Prediction in Goaf
Deng, Shuling
Isothermal crystallization kinetics and morphology of nanodiamond/polyphenylene sulfide composites
Diao, Chuanyan
Pollution level of volatile phenols in surface water in a bay in Shandong Province, eastern China
Ding, Huiling
Synthesis of A Single-Phase Superfine Na-Y Zeolite from Coal Fly Ash
Ding, Jie
The effect of boron incorporation on the thermo-oxidative stability of phenol-formaldehyde resin and its pyrolyzate phase
Ding, Wei
Study of microstructure and mechanical property on bulk Ni–Fe alloys fabricated by electrodeposition
Ding, Yang
The Study on the Application of Computer Technology in Coal Quality Detection
Dong, ChangQing
Numerical Simulation of the Release of Alkali Metal during the Combustion of Biomass-fired Boiler
Dong, Wenyi
Enhancement of PAC addition for MBR treating micro-polluted water resource loading with 2,4,6-TCP
Dong, Zeliang
Porous WO3 beads fabricated by microfludic device
Du, Chongmin
Isothermal crystallization kinetics and morphology of nanodiamond/polyphenylene sulfide composites
Du, Xiaowei
Study on the TIG Welding Technology of the Aluminized Steel
Du, Yufeng
Lightweight Design of an Axial Flow Roller Based on Sensitivity Analysis
Du, ZhengZhi
Research of Magnetotydrodynamics in a Free-Burning
Du, Zhihong
Study of Modified Epoxy Resin
Duan, Hongmin
Preparation and Characterization of the Phthalazinone Structure-based Microporous Organic Polymer
Duan, Jihai
Numerical simulation and optimizing of the hydrolysis reaction about methyl ethyl ketone azine
Duan, Jihai
Simulation and optimization for separation of ethylenediamine-water azeotropic mixture
Duan, Jihai
Numerical Investigation of the Impact of Shrinkage on the Pyrolysis of Biomass
Duan, Junwei
Status and Development of Surface Alloying by Electron Beam