Proceedings of the International Seminar of Science and Applied Technology (ISSAT 2020)

Reliability and Life Data Analysis on the Components of Pump

Authors
Dewi Pitaloka, Fachri Koeshardono
Corresponding Author
Dewi Pitaloka
Available Online 22 December 2020.
DOI
10.2991/aer.k.201221.031How to use a DOI?
Keywords
Reliability, Availability, Erosion, Corrosion, Pump unit, Strategy Maintenance
Abstract

The aim of this study is to highlight the importance of analyzing the reliability and data analysis in the industry. This analysis makes it possible to determine the pattern of damage that has occurred in order to determine the right treatment strategy. This study was conducted in a state-owned company in the Oil and Gas sector. They suffer losses in the production process and high maintenance costs due to pump failure. This problem comes from the working fluid that is flowed containing a catalyst which is erosion-corrosion and affects the damage to the pump components. The pump is a type of centrifugal pump with the parallel installation. The identification of pump failures is completed in this analysis with the help of the existing asset criticality rating system and failure time data is collected from the last 15 years from 3 pump units to perform reliability and life data analysis. The analysis begins by determining the failure mode of each pump. The highest number of failures is associated with failure of the mechanical seal, and the bearings. The analysis was carried out using the aid of software to help determine the reliability and other parameters. After analyzing the reliability of the pump components, it is known that the pump components have failed differently. In mechanical seals, there is premature damage caused by the working fluid, and the bearings experience random failure. Based on the results of the reliability analysis that has been carried out, it is recommended to carry out predictive maintenance for a mechanical seal and bearing components and to make a maintenance schedule which is expected to extend the service life of the pump. The reason for the high maintenance costs is because the handling of the damage that occurs is not properly planned. The random failure mode is also one factor in increased maintenance costs.

Copyright
© 2020, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Seminar of Science and Applied Technology (ISSAT 2020)
Series
Advances in Engineering Research
Publication Date
22 December 2020
ISBN
978-94-6239-307-3
ISSN
2352-5401
DOI
10.2991/aer.k.201221.031How to use a DOI?
Copyright
© 2020, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Dewi Pitaloka
AU  - Fachri Koeshardono
PY  - 2020
DA  - 2020/12/22
TI  - Reliability and Life Data Analysis on the Components of Pump
BT  - Proceedings of the International Seminar of Science and Applied Technology (ISSAT 2020)
PB  - Atlantis Press
SP  - 178
EP  - 183
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.201221.031
DO  - 10.2991/aer.k.201221.031
ID  - Pitaloka2020
ER  -