Numerical Mathematical Simulation of Penetration of Indenters of Different Shapes During Strengthening Machine Parts via Local Loading of Deformation Zone
Authors
O.V. Pilipenko, S.Y. Radchenko, V.A. Golenkov, D.O. Dorohov
Corresponding Author
O.V. Pilipenko
Available Online December 2018.
- DOI
- 10.2991/isees-18.2018.108How to use a DOI?
- Keywords
- numerical mathematical simulation, gradient strengthening of machine parts, combined local loading of the deformation zone, Odkvist parameter, strengthening depth
- Abstract
Numerical mathematical simulation of the strengthening combined local loading of the deformation zone in the process of penetration of indenters of different shapes into the piece body was considered. The simulation results were presented in the form of the pattern corresponding to the Odkvist parameter change depending on the type of the tool and the depth (force) of its penetration into the piece body. Based on the analysis of numerical mathematical simulation data, practical recommendations have been formulated pertinent to the selection of the indenter shape for the processes of gradient strengthening of machine parts in the conditions of combined local loading of the deformation zone.
- Copyright
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - O.V. Pilipenko AU - S.Y. Radchenko AU - V.A. Golenkov AU - D.O. Dorohov PY - 2018/12 DA - 2018/12 TI - Numerical Mathematical Simulation of Penetration of Indenters of Different Shapes During Strengthening Machine Parts via Local Loading of Deformation Zone BT - Proceedings of the International Symposium “Engineering and Earth Sciences: Applied and Fundamental Research” (ISEES 2018) PB - Atlantis Press SP - 568 EP - 573 SN - 2352-5401 UR - https://doi.org/10.2991/isees-18.2018.108 DO - 10.2991/isees-18.2018.108 ID - Pilipenko2018/12 ER -