Grinding Force of 42CrMo Steel in Grind-Hardening

DOI

10.2991/icmse-16.2016.70How to use a DOI?

Keywords

Grind-Hardening, Grinding Speed, Grinding Depth, Workpiece Speed, 42CrMo steel, Ratio of Grinding Force

Abstract

Grinding force has important effects on the forming and quality of the hardened layer. The grind-hardening test of 42CrMo steel was carried out on a forming grinding machine. The results show the chief influence factor on the tangential and normal grinding force is the grinding depth, the grinding speed takes the second place and the workpiece speed is the last. When the grinding depth and workpiece speed increases, the tangential grinding force and normal grinding force both increase. The tangential grinding force and normal grinding force are declining as the grinding speed increasing. The results also show the chief influence factor on the ratio of the tangential and normal grinding force is the grinding depth, and the workpiece speed takes the second place and the grinding speed is the last. With the increase of the grinding speed and grinding depth, the grinding ratio increases. However, with the increase of the workpiece speed, the grinding ratio decreases. It provides the foundation for improving the quality of the grind-hardening.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Gui-Cheng Wang
AU  - Jun-Feng Zou
AU  - Tian-Cheng Huang
AU  - Hong-Jie Pei
PY  - 2016/12
DA  - 2016/12
TI  - Grinding Force of 42CrMo Steel in Grind-Hardening
BT  - Proceedings of the 4th 2016 International Conference on Material Science and Engineering (ICMSE 2016)
PB  - Atlantis Press
SP  - 420
EP  - 426
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmse-16.2016.70
DO  - 10.2991/icmse-16.2016.70
ID  - Wang2016/12
ER  -