The design of Vehicle Low-speed intelligent braking system

DOI

10.2991/icmra-15.2015.270How to use a DOI?

Keywords

Compound Processes; Machining; Ultrasonic; Electrochemical Finishing; Drilling; Surface Finish.

Abstract

This document explains and demonstrates how to prepare your camera-ready manuscript for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. The text area for your manuscript must be 17 cm wide and 25 cm high (6.7 and 9.8 inches, resp.). Do not place any text outside this area. Use good quality, white paper of approximately 21 x 29 cm or 8 x 11 inches (please do not change the document setting from A4 to letter). Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Fanbiao Bao
AU  - Baoshan Huang
PY  - 2015/04
DA  - 2015/04
TI  - The design of Vehicle Low-speed intelligent braking system
BT  - Proceedings of the 3rd International Conference on Mechatronics, Robotics and Automation
PB  - Atlantis Press
SP  - 1397
EP  - 1400
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmra-15.2015.270
DO  - 10.2991/icmra-15.2015.270
ID  - Bao2015/04
ER  -