Research on the morphology of polished surface based on the new polishing method
- https://doi.org/10.2991/icmra-15.2015.221How to use a DOI?
- Polishing. New method. Structure. Simulation. Morphology
Because polishing the large die surfaces is very difficult due to its complex machined process, almost all of large die surfaces are manually polished currently, in this paper researched on a new polishing method for polishing curved surface, simulated the structure of new polishing device with three polishing disks, and compared with linear reciprocating and cross mode; simulated and analyzed respectively surface morphology of polishing workpiece of flat, cylindrical convex and concave surface for different polishing way, and then researched on the impact law on the polished surface roughness about some factors such as the abrasive grain size, the moving speed of polishing head, at last, carried on the test study with the developed new polishing experimental prototype made by the authors of this paper. The research results show that the simulation results agree with test results and simulation analysis is useful to select suitable process parameters for the new polishing machine to polish actual workpiece.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - X.C. Xu AU - S.W. Zhang PY - 2015/04 DA - 2015/04 TI - Research on the morphology of polished surface based on the new polishing method BT - Proceedings of the 3rd International Conference on Mechatronics, Robotics and Automation PB - Atlantis Press SP - 1144 EP - 1147 SN - 2352-538X UR - https://doi.org/10.2991/icmra-15.2015.221 DO - https://doi.org/10.2991/icmra-15.2015.221 ID - Xu2015/04 ER -