Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications

A New Power System Phase Identification Method based on Difference Value

Authors
Bo Liu, Bo-neng Chen, Jie Li, Rui-hua Xia
Corresponding Author
Bo Liu
Available Online November 2015.
DOI
10.2991/icmmita-15.2015.230How to use a DOI?
Keywords
Power System; Phase Identification; Difference Value; Generalized Admittance
Abstract

In accordance with the problems of phase selection method based on difference of phase-to-phase current, that is, phase selection mistake when double-phase ground fault occur and insufficient sensitivity of phase selection when the positive and negative sequence impedances of system are not equal, a new power system phase identification method based on difference value was proposed. The method combined difference of phase voltages with difference of phase-to-phase current, and three generalized admittances were defined to identify phases by comparing their values. The simulation results showed that this method could identify phases correctly on different fault location and different fault resistance, it has sufficient sensitivity and high reliability.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
Series
Advances in Computer Science Research
Publication Date
November 2015
ISBN
978-94-6252-120-9
ISSN
2352-538X
DOI
10.2991/icmmita-15.2015.230How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Bo Liu
AU  - Bo-neng Chen
AU  - Jie Li
AU  - Rui-hua Xia
PY  - 2015/11
DA  - 2015/11
TI  - A New Power System Phase Identification Method based on Difference Value
BT  - Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
PB  - Atlantis Press
SP  - 1247
EP  - 1252
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmmita-15.2015.230
DO  - 10.2991/icmmita-15.2015.230
ID  - Liu2015/11
ER  -