Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)

Utilization of Iron Ore Tailing for the Preparation of α-Fe2O3 nanoparticles

Authors
Xiaodong Xu, Yanxi Deng
Corresponding Author
Xiaodong Xu
Available Online February 2018.
DOI
10.2991/icmea-17.2018.29How to use a DOI?
Keywords
iron ore tailing; preparation; nanoparticles
Abstract

The objective of this study was to recover the iron from the iron ore tailing and convert it into a value-added products like -Fe2O3 nanoparticles with photocatalytic properties. Iron was extracted from the iron ore tailing by using acid leaching method and the leaching parameters were discussed. When the amount and concentration of HCl, leaching reaction temperature and time were fixed at 21.4ml, 30%, 100�C and 1.5h, respectively, the iron recovery reached 99.63%. Mesoporous -Fe2O3 nanoparticles were successfully prepared by a facile precipitation method using the acid leaching solution as the iron source. The -Fe2O3 samples were characterized by XRD, SEM, N2 adsorption and UV-Vis spectroscopy. The crystallite size of -Fe2O3 was about 36nm and the specific surface area was 46.03m2/g. The mesoporous -Fe2O3 prepared from iron ore tailing displayed better photocatalytic activity for the degradation of methylene blue, which was similar to that of -Fe2O3 prepared from pure agent.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)
Series
Advances in Engineering Research
Publication Date
February 2018
ISBN
978-94-6252-448-4
ISSN
2352-5401
DOI
10.2991/icmea-17.2018.29How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Xiaodong Xu
AU  - Yanxi Deng
PY  - 2018/02
DA  - 2018/02
TI  - Utilization of Iron Ore Tailing for the Preparation of α-Fe2O3 nanoparticles
BT  - Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)
PB  - Atlantis Press
SP  - 125
EP  - 128
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmea-17.2018.29
DO  - 10.2991/icmea-17.2018.29
ID  - Xu2018/02
ER  -