Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)

Study on the heat generation characteristics of lithium ion power battery with NCM/Si-C composite anode material

Authors
Chuncheng Liu, Shiqiang Liu, Jing Wang, Chunjing Lin, Fang Wang, Yuefeng Su, Shi Chen, Feng Wu
Corresponding Author
Chuncheng Liu
Available Online February 2018.
DOI
10.2991/icmea-17.2018.17How to use a DOI?
Keywords
lithium ion battery; Si-C composite; thermal characteristics; internal resistance; EIS
Abstract

Thermal characteristics of lithium ion batteries are particularly important for both the optimization of the battery cells and design of the thermal management system for battery packs. The Si-C composite applied in lithium ion battery could improve the battery's energy density. For a 3 Ah pouch lithium ion battery with NCM/Si-C composite material system, the thermal characteristics were analyzed during the charging and discharging processes using the Extended Volume-Accelerating Rate Calorimeter. Meanwhile a 3 Ah pouch lithium ion battery with NCM/graphite composite material system was used as the reference sample. The internal resistance has great influence on the thermal behavior of Li-ion batteries. Thus, internal resistances of the battery cell were measured using the electrochemical impedance spectroscopy (EIS) method. Experimental results showed that the battery cell with NCM/Si-C generated much more amount of heat during charging and discharging processes. Temperature rise and heat generation power of the batteries increased as the current rate rising during charging and discharging processes. In addition, the overall internal resistance obtained by EIS had a close relationship with the heat generation behavior.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)
Series
Advances in Engineering Research
Publication Date
February 2018
ISBN
978-94-6252-448-4
ISSN
2352-5401
DOI
10.2991/icmea-17.2018.17How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Chuncheng Liu
AU  - Shiqiang Liu
AU  - Jing Wang
AU  - Chunjing Lin
AU  - Fang Wang
AU  - Yuefeng Su
AU  - Shi Chen
AU  - Feng Wu
PY  - 2018/02
DA  - 2018/02
TI  - Study on the heat generation characteristics of lithium ion power battery with NCM/Si-C composite anode material
BT  - Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)
PB  - Atlantis Press
SP  - 71
EP  - 75
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmea-17.2018.17
DO  - 10.2991/icmea-17.2018.17
ID  - Liu2018/02
ER  -